oki, da ist das vorgehen dann etwas anders, steht aber auch in dem readme:
bootpfile ist das /dbox2/tftpboot/ppcboot aus der bdox2.rar
NFS ist /dbox2/
und dann NICHT im bootmanager auf "image auslesen" sondern ganz normal "start" drücken
COM auf 9600
und dann resetten mit pfeil-nach-oben festhalten
boot net im Com eintippen
und dann am ende den anweisungen folgen mit
cat /dev/mtd/5 >/image.img
das image ist dann in /dbox2/cdkroot
Sagem Kabel 2*AMD-nix mit help
-
gonzos
- Interessierter
- Beiträge: 22
- Registriert: Mittwoch 29. Mai 2002, 02:40
Habe das Image jetzt in TuxboxFlashtools geöffnet und gespeichert. Hat jetzt die richtige Grösse.
Wollte dann das Image flashern ALEXW1.2 2x - wie immer bei mir - geht nicht
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-10.b2.85.07.00.00-88
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
kann es sein, das ich nochmal die DEBUGPROZEDUR starten muss?
Wollte dann das Image flashern ALEXW1.2 2x - wie immer bei mir - geht nicht
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-10.b2.85.07.00.00-88
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
kann es sein, das ich nochmal die DEBUGPROZEDUR starten muss?
-
Jau
- Einsteiger
- Beiträge: 185
- Registriert: Freitag 7. September 2001, 00:00
Nene, wenn du einmal im Debug bist, bist du im Debug, ist wie schwanger oder nicht schwanger. Zur Erklärung: Der Debugmode sorgt nur dafür, das der Bootloader auch unsignierte Kernels bootet, was er normalerweise(ohne Debug) nicht tut. Somit hat man 2 Möglichkeiten: 1. Signieren des eigenen Kernels => Geht nicht, da illegal und Privater Schlüssel von BR nicht vorhanden. 2. Debug Mode enablen => Im Chorus Kernel (wenn die Box noch normal läuft, kannst du dir die Umgebungsvariablen anschauen. Dort wirst du eine finden, die sich "Product" nennt. Diese Umgebungsvariable steht im Bootloader, welcher schreibgeschützt ist. Diese Umgebungsvariable soll umgesetzt werden auf "False". Darum muß man den Schreibschutz aufheben, damit man diese Variable umsetzen kann. Dananch: Box ist im Debug Mode und bootet auch unsignierte Kernels.
Soviel zu Erläuterung.
Zu deinem Prob: Du scheinst eine Netzwerk-Problem zu haben, wie unschwer aus den Meldungen zu ersehen ist.
1.) Verbinde Box mit Crossover mit PC
2.) Verbinde Box mit Nullmodemkabel mit PC
3.) Starte Bootmananger
4.) Bootmanager => Image flashen (Unter Utils)
5.) Wähle das Baseimage 1.5 aus (vorher downloaden)
6.) Box in Strom stecken
7.) Meldungen betrachten, sollte nach 1-15 Minuten (hat schon mal so lange gedauert) fertig sein
8.) Wenn fertig: Box vom Strom, Bootmanager aus
9.) Box in Strom
10.) cdk.cramfs per FTP auf Box, Ucode.bin, cam-alpha.bin und aviaxxx.bin per ftp auf box
11.) Enjoy Linux !!!
Hoffe geholfen zu haben
Soviel zu Erläuterung.
Zu deinem Prob: Du scheinst eine Netzwerk-Problem zu haben, wie unschwer aus den Meldungen zu ersehen ist.
1.) Verbinde Box mit Crossover mit PC
2.) Verbinde Box mit Nullmodemkabel mit PC
3.) Starte Bootmananger
4.) Bootmanager => Image flashen (Unter Utils)
5.) Wähle das Baseimage 1.5 aus (vorher downloaden)
6.) Box in Strom stecken
7.) Meldungen betrachten, sollte nach 1-15 Minuten (hat schon mal so lange gedauert) fertig sein
8.) Wenn fertig: Box vom Strom, Bootmanager aus
9.) Box in Strom
10.) cdk.cramfs per FTP auf Box, Ucode.bin, cam-alpha.bin und aviaxxx.bin per ftp auf box
11.) Enjoy Linux !!!
Hoffe geholfen zu haben
-
gonzos
- Interessierter
- Beiträge: 22
- Registriert: Mittwoch 29. Mai 2002, 02:40
Bis jetzt sieht alles so aus, für mich alles gleich ?????
jdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-10.b2.85.07.00.00-88
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.10
debug: Sending TFTP-request for file C/Programme/DBoxBoot/DBOXNOT/tftpboot/ppcbo
ot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-39-02-5b
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.10
Filename 'C/Programme/DBoxBoot/DBOXNOT/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/Programme/D
BoxBoot/DBOXNOT/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/Progra
mme/DBoxBoot/DBOXNOT/cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:39:02:5b
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
0: offset=0x0,size=0x4000,blocks=8
1: offset=0x20000,size=0x20000,blocks=63
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.10
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
portmap: server 192.168.0.1 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/2 on 192.168.0.1
portmap: server 192.168.0.1 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.0.1 not responding, timed out
Root-NFS: Server returned error -5 while mounting C/Programme/DBoxBoot/DBOXNOT/c
dkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C022FDF0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C022FDF0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C022FD60 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FDD51C 01F9FFC0 01FA0038 000000F8
GPR24: C02F3150 00100040 00800000 FFFFFFEA C0170000 FFFFFFFF C0150000 00000000
Call backtrace:
00004242 C0008FF0 C000EE74 C0141C0C C013E814 C00022AC C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..
jdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-10.b2.85.07.00.00-88
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.10
debug: Sending TFTP-request for file C/Programme/DBoxBoot/DBOXNOT/tftpboot/ppcbo
ot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-39-02-5b
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.10
Filename 'C/Programme/DBoxBoot/DBOXNOT/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/Programme/D
BoxBoot/DBOXNOT/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/Progra
mme/DBoxBoot/DBOXNOT/cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:39:02:5b
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
0: offset=0x0,size=0x4000,blocks=8
1: offset=0x20000,size=0x20000,blocks=63
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.10
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
portmap: server 192.168.0.1 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/2 on 192.168.0.1
portmap: server 192.168.0.1 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.0.1 not responding, timed out
Root-NFS: Server returned error -5 while mounting C/Programme/DBoxBoot/DBOXNOT/c
dkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C022FDF0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C022FDF0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C022FD60 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FDD51C 01F9FFC0 01FA0038 000000F8
GPR24: C02F3150 00100040 00800000 FFFFFFEA C0170000 FFFFFFFF C0150000 00000000
Call backtrace:
00004242 C0008FF0 C000EE74 C0141C0C C013E814 C00022AC C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: 00004242 LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..
-
gonzos
- Interessierter
- Beiträge: 22
- Registriert: Mittwoch 29. Mai 2002, 02:40
-
Zahni
- Tuxboxer
- Beiträge: 2227
- Registriert: Freitag 24. Mai 2002, 10:38
-
gonzos
- Interessierter
- Beiträge: 22
- Registriert: Mittwoch 29. Mai 2002, 02:40
Also, wie gesagt, ich versuche JETZT ganz normale über Image Flashen zu gehen. Im Display der Box steht:
BMon V1.1 mID 03 und noch weitere Zahlen.
Weiterhin steht kein System und ich habe alle Brücken wieder ausgelötet.
Wenn ich dann auf Image flashen gehe, Alexw 2x V1.5 BASIS, OK bestätige und dann die Box ans Netz nehme, dann kommt:
jdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-10.b2.85.07.00.00-88
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
BMon V1.1 mID 03 und noch weitere Zahlen.
Weiterhin steht kein System und ich habe alle Brücken wieder ausgelötet.
Wenn ich dann auf Image flashen gehe, Alexw 2x V1.5 BASIS, OK bestätige und dann die Box ans Netz nehme, dann kommt:
jdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-10.b2.85.07.00.00-88
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Invalid argument
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
-
gonzos
- Interessierter
- Beiträge: 22
- Registriert: Mittwoch 29. Mai 2002, 02:40
JAU hatte Recht
HURRRRRA, habe geflasht. NETZWERKPROBLEM, wie JAU schon vermutete. Jetzt wird nach der cdk.cramfs gefragt. Die habe ich per FTP nach /tmp hochgeladen. Und wo bekomme ich die Ucodes her. Hab mir zwar welche aus dem Netz geholt, fur Kabel, was auch OK ist. Alles übertragen.
Meine Frage, wird die Box mit der UCODE.BIN laufen?????
Meine Frage, wird die Box mit der UCODE.BIN laufen?????
