Die Suche ergab 79 Treffer

von graugans
Dienstag 21. Oktober 2014, 22:10
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Genau, bis auf die Display Ansteuerung sind die recht ähnlich. Ich würde die Funktionalität hinter Interfaces kapseln und bei Bedarf überladen. Dann eine Factory welche die richtigen Klassen instanziert. Ich stehe einfach nicht auf ifdef ;)

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Montag 20. Oktober 2014, 19:21
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Wegen der libstb-hal, da kann man vermutlich auf der azbox aufbauen. Die e2 boxen haben alle recht ähnliche /proc/ APIs den Rest in e2 oder Neutrino-HD2 nach schauen.

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Montag 20. Oktober 2014, 19:13
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Das recipe war als Idee gedacht. So ähnlich werden die Neutrino-HD2 Plugins vermutlich auch gebaut werden.

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Freitag 17. Oktober 2014, 13:00
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Vielleicht hilft Dir das ja weiter: https://github.com/seife/meta-neutrino- ... ins_git.bb

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Dienstag 14. Oktober 2014, 22:54
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Problem erkannt, Problem gebannt. Das Problem ist mohoush verwendet nicht pkgconfig in seinem configure.ac sondern freetype-config. Was falls vorhanden die Werte des hosts zurück liefert. Anbei mein kleiner Patch welcher das behebt. Index: nhd2-exp/configure.ac ======================================...
von graugans
Dienstag 14. Oktober 2014, 19:16
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Wie hast Du pkg_config_path gesetzt?

Gesendet von meinem Nexus 7 mit Tapatalk
von graugans
Dienstag 14. Oktober 2014, 19:15
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Die Einträge mit den BOXTYPEs findest Du hier: https://github.com/oe-alliance/oe-allia ... hd-bin.inc

Gesendet von meinem Nexus 7 mit Tapatalk
von graugans
Dienstag 14. Oktober 2014, 15:12
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

BTW für Deine gigahdquadplus gibt es glaube ich keine Direktive für den BOXTYPE_${MACHINE}
von graugans
Dienstag 14. Oktober 2014, 15:06
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

| ../mipsel-oe-linux-libtool --tag=CXX --mode=link mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/media/tux/build-enviroment/builds/openatv/gbquadplus/tmp/sysroots/gbquadplus -Os -pipe -g -feliminate-unused-debug-types -fvisibility-inlines-hidden -Wl,--export-dynamic -Wl,-O...
von graugans
Dienstag 14. Oktober 2014, 13:26
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Räusper Räusper, der Linker hat nix mit Headern zu tun das ist der Preprozessor ;) normalerweise werden die include files via -I variable an den GCC übergeben was die klassische Aufgabe von pkgconf ist ;)

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Sonntag 12. Oktober 2014, 10:21
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Ja, da scheint pkgconf nicht richtig verwendet zu werden. Ich bin unterwegs, sonst könnte ich mir das anschauen. Entweder Makefile patchen oder eine variable setzen. Grep mal den oealliance layer nach grep -ri pkgconf

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Sonntag 12. Oktober 2014, 09:07
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Er versucht die libfreetype von Deinem host zu linken. Was nicht geht. Da würde ich mal im recipe vom Neutrino-HD2 schauen ob das pkgconf richtig verwendet wird.

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Sonntag 5. Oktober 2014, 11:37
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Die CET kannst Du eigentlich auch vom deinem Host nehmen.

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Sonntag 5. Oktober 2014, 11:32
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: AW: NeutrinoHD(2) für sh4 und mips Platformen

[img]http://img.tapatalk.com/d/14/10/05/egatyjy9.jpg[/img]
So sieht es bei mir auf der Solo aus. Allerdings ohne Neutrino-HD2 image ist pbnigma

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Sonntag 5. Oktober 2014, 10:33
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Das ist seltsam, bei mir ist das eine binary (CET)

Gibt es bei Dir die /etc/localtime? Falls ja wo zeigt die hin?


Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Samstag 4. Oktober 2014, 09:43
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Meines Wissens nach prüft e2 ob GIGA -> RTC offset. Das liegt an UTC un local time.

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Samstag 4. Oktober 2014, 09:12
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

/proc/stb/fp/RTC
/proc/stb/fp/rtc_offst

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Samstag 4. Oktober 2014, 09:07
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Die GIGA Quad hat glaube ich wie die GIGA 800 solo keine richtige RTC Implementierung. Da kann man die UNIX Zeit in eine Datei unter /proc/stb/... schreiben. Das wir vermutlich nicht von Neutrino-HD2 unterstützt. Dort gibt es auch eine Offset Datei. In welcher man den Offset zu UTC einstellen kann. ...
von graugans
Montag 9. Juni 2014, 18:03
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

https://github.com/oe-alliance/build-en ... t/issues/1

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Montag 9. Juni 2014, 18:01
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

In der Datei bblayers im conf Ordner. (builds/distro/gbxxxx/...) Wie gesagt das Makefile ist da falsch. Da muss der meta-brands/meta-giga oder so rein. Es fehlen aber noch mehr Layer.

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Montag 9. Juni 2014, 16:02
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Keine Ahnung wo sich die oea DEVs tummeln. Für den 2.2er Branch gibt es noch kein Makefile. Ich habe mir da selbst was gebastelt. Ich kann mal schauen ob ich für die quad was Zustande bringe :). Der Vorteil des 2.2er ist die Aufteilung in die Layer für die einzelnen Brands. P.S.: Ich bastel gerade a...
von graugans
Donnerstag 5. Juni 2014, 21:57
Forum: Neutrino
Thema: NeutrinoHD(2) für sh4 und mips Platformen
Antworten: 131
Zugriffe: 20815

Re: NeutrinoHD(2) für sh4 und mips Platformen

Welchen OEA Branch baust Du denn? Poste bitte mal Deine Konfigs. Da stimmt was nicht mit den Layern.

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Sonntag 11. Mai 2014, 22:27
Forum: Buildsystem, SDK
Thema: Yocto Daisy mit Spark
Antworten: 4
Zugriffe: 2309

Re: Yocto Daisy mit Spark

Nope, np könnte eher Probleme verursachen wenn sich von GCC Version zu Version was in den calling convetions geändert hätte. Den STMFB & Player2 habe ich mir nie im Detail angeschaut, ist mir irgendwie zu komplex gewesen. Schade finde ich das da immer jeder an dem kernel/treiber code rumpatched ...
von graugans
Sonntag 11. Mai 2014, 22:09
Forum: Buildsystem, SDK
Thema: Yocto Daisy mit Spark
Antworten: 4
Zugriffe: 2309

Re: Yocto Daisy mit Spark

Verwendet Du das OSS pti oder ein anderes? Der stmfb ist eher für die GUI beim Video signal ist eher der player2 für verantwortlich. Bei meinen e2 Experimenten habe ich Probleme bei 60 Hz Video Wiederholrate und HD Kanälen gehabt....

Gesendet von meinem Nexus 4 mit Tapatalk
von graugans
Mittwoch 12. März 2014, 20:17
Forum: Buildsystem, SDK
Thema: Neutrino-MP-martii
Antworten: 5
Zugriffe: 2771

Re: Neutrino-MP-martii

Hi, ich habe gerade nochmal nachgeschaut, der symlink wird in einer udev Rule erzeugt welche im lirc recipe zu finden ist: ./recipes-extended/lirc/files/98-lirc_spark.rules KERNELS=="input*", SUBSYSTEMS=="input", ATTRS{name}=="lircd", SYMLINK+="input/nevis_ir"...