bin ein newbie in linux hab aber schon einiges mit eurer hilfe geschafft aber nu weiß ich net weiter.
debug mode OK !
dbox unter windows geflasht alles sowei ok wenn ich die box nu an den fernseher hänge hab ich nur ein grünes bild???
habe die box mit d-box boot geflasht und das file genomen:
baseimage_1x.img bzw.
baseimage_2x.img
wo besteht der unterschied dieser beiden img??
das sit mein boot vorgang:
Ndebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-af.5a.60.07.00.00-87
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23
debug: Sending TFTP-request for file C/dbox2ne/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-43-54-6c
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80833 (0x1E00 bytes)
FB logo at: 0x8265B (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'C/dbox2ne/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
##################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 616299 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.3) #1 Fri Jan 11
00:16:01 CET 2002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/dbox2ne/cdk
root/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/dbox2n
e/cdkroot/
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:43:54:6c
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.23
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
portmap: server 192.168.0.1 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/2 on 192.168.0.1
portmap: server 192.168.0.1 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
was nu?
danke für eure hilfe
