debug problem

The forum for our foreign guests... Please post in English
bigyin
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Dienstag 30. August 2005, 20:00

debug problem

Beitrag von bigyin »

Hello,Afer putting my box in debug mode and using dbox manager terminal, i Write in chorous 800000 and it replys and goes in to reset mode and the terminal is locked,is this box scrap .the box boots up and goes into h. wilkommen :gruebel: It is a nokia b v 1.0
PT-1
Moderator english
Beiträge: 2458
Registriert: Donnerstag 20. Dezember 2001, 00:00

Beitrag von PT-1 »

bigyin
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Dienstag 30. August 2005, 20:00

Beitrag von bigyin »

Thanks i have read these tuts,but can,t see anything describing my problem.
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

IF the box is in debug mode now - where is your actual problem?

The box will of course still boot BetaNova if not told to do anything else.
There are 10 types of people in the world: those who know binary and those who don't
rasc
Senior Member
Beiträge: 5071
Registriert: Dienstag 18. September 2001, 00:00

Beitrag von rasc »

What are you trying to do?

After getting into debugmode, you just need to flash the box.
bigyin
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Dienstag 30. August 2005, 20:00

Beitrag von bigyin »

hi,The box was a virgin box.I used the pin 12 method and put it on 5 bars.I enter icache, i cache on.I enter chorus 800000 ,it replied back and went into reset.
PT-1
Moderator english
Beiträge: 2458
Registriert: Donnerstag 20. Dezember 2001, 00:00

Beitrag von PT-1 »

If you have really read the tut's you would have read that the Nokia BMon 1.0 is a very special Box.

It is 99,9% your PC or your Network.

Make sure you:

De-install all ANTIVIRUS and Firewall (Nortons !)

Set Network Card to 10MBit Half Duplex

Then try it again !
bigyin
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Dienstag 30. August 2005, 20:00

Beitrag von bigyin »

after writing in chorus 800000,it replies branching to 0x409b8, then no thing happens,just wondering if there is something wrong with the ppc bootfile,also what ip adress do you use ,i have read that in virgin mode the ip doesn,t matter.Do you set the networkcards ip address to one number less or leave on auto.
PT-1
Moderator english
Beiträge: 2458
Registriert: Donnerstag 20. Dezember 2001, 00:00

Beitrag von PT-1 »

The DBox boots via TFTP and does not need a IP address assigned to it as it has not got neutrino or enigma on it.