die Version pppd für die aktuelle Version zu sammeln

The forum for our foreign guests... Please post in English
kuka_v
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Donnerstag 24. November 2005, 14:24

die Version pppd für die aktuelle Version zu sammeln

Beitrag von kuka_v »

Die Freunde,
Ob man Sie bitten kann, die Version pppd für die aktuelle Version der Software zu sammeln.
Die Abstimmung des Mittwochs der Erarbeitung nur für die Montage eines Dämonex sehr nicht produktiv.
Houdini
Developer
Beiträge: 2183
Registriert: Mittwoch 10. Dezember 2003, 07:59

Beitrag von Houdini »

???
Maybe you can try in english

Houdini
kuka_v
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Donnerstag 24. November 2005, 14:24

Beitrag von kuka_v »

Lets do it in English.
Would anybody help me and make pppd for current version.
Just now I have not development system to build pppd someself.
As far as I know, I need a module (to link with kernel) and pppd to start peer to peer connection through mobile phone.
Barf
Developer
Beiträge: 1475
Registriert: Dienstag 4. Februar 2003, 22:02

Beitrag von Barf »

Ok, now I get it.

Getting ppp to work on the Tuxbos is just like any other Linux system. "In principle" not awfully hard. The problem is that you want someone to do it :wink:

There are PowerPC-compiled Linux-Binaries around (RedHat or Mandrake or ... ?) For the serial ports: if you do not need the normal one, just connect to the DB-9 connector (serial device is /dev/tts0 (inbount) and /dev/cua/0 (outbound)). Otherwise, thow out the internal modem, and use serial port /dev/ttys/1 and /dev/cua/1.
kuka_v
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Donnerstag 24. November 2005, 14:24

Beitrag von kuka_v »

I cannot find precompilied binaries for kernel 2.4.29(31)
I try ver for 2.6 - it replay segmentation fault
So there are two answers - no right modules or wrong version
kuka_v
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Donnerstag 24. November 2005, 14:24

Beitrag von kuka_v »

I am not worry about configuration process, I did it many times on the PC-s. So I have init string for my mobile modem and start/stop scripts.
They are works good.

I am not rememeber just now- have I to check during compiling the kernel some special for pppd?
Or it enough with the serial&tcp in kernel and right pppd version.

The only trouble what I can predict is the version of libc what use you during compiling the kerenel.
Houdini
Developer
Beiträge: 2183
Registriert: Mittwoch 10. Dezember 2003, 07:59

Beitrag von Houdini »

which kernel version do you have on your dbox?
kuka_v
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Donnerstag 24. November 2005, 14:24

Beitrag von kuka_v »

Just now I have kernel ver 2.4.27.
I am going to change the whole flash image to Sportser Pro,
so as I know it will be 2.4.31.
But I will agree with any version if you give flashimage and coordinated
pppd
Barf
Developer
Beiträge: 1475
Registriert: Dienstag 4. Februar 2003, 22:02

Beitrag von Barf »

Ouaaah! That image is for illegal reception of paytv, and as such will not be discussed, even less supported, in this forum. See http://forum.tuxbox.org/forum/viewtopic.php?t=36434.

There is another reason why this is a bad choice. First, what ingredients these guys put into their soup no-one knows, except for themselves. Secondly, "except for the ilegal stuff", they do not offer any additional sensible functionallity. They copy/steal from us. THIS is the source.

Best bet is to get the CVS sources and learn to build it. Second best is to use a dietmarw jffs2-image, see http://wiki.tuxbox.org/Images:dietmarw