JTAG cable

The forum for our foreign guests... Please post in English
Antworten
dbox2ilike
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Donnerstag 1. November 2007, 11:26

JTAG cable

Beitrag von dbox2ilike »

Hi,

I wonder what JTAG cable works for Nokia Dbox2. Is there any schematic diagram for it?'

Thanks,
David
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Beitrag von seife »

There is no JTAG interface on dboxen.
dbox2ilike
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Donnerstag 1. November 2007, 11:26

Beitrag von dbox2ilike »

what if it got bricked after flashing? I think every processor provide JTAG interface. Am I right?
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Beitrag von seife »

dbox2ilike hat geschrieben:what if it got bricked after flashing?
Then you have to take out the soldering iron, unsolder the flash chips and flash them in an external programmer.
I think every processor provide JTAG interface. Am I right?
Probably yes, but it does not mean that this interface is routed anywhere on the PCB. As the dbox was never intended to be flashed by anybody after leaving the factory, it does not have a JTAG interface.
Z80
Erleuchteter
Erleuchteter
Beiträge: 710
Registriert: Dienstag 3. September 2002, 12:54

Beitrag von Z80 »

dbox2ilike hat geschrieben: Am I right?
yes you're right. but on most nokia dbox2 (say 99,5%) there's no way to connect to the required pins, as they aren't routed on PCB.
Only a very few nokia boxes have bound the needed signals from cpu to useable vias.
however, in general manners you couldn't brick your dbox by just flashing it. if you really brick it (e.g. by killing the bootloader) its most common to sold out flashes and to re-program it with a suitable device (programmer).
For further information use the search-engine of this forum. :wink:
Furthermore there is tons of info (unfortunately most in german language) about JTAG/BDM in here, too.

P.S.
damn, seife responded 3 minutes faster. :wink:
Zuletzt geändert von Z80 am Sonntag 4. November 2007, 09:09, insgesamt 2-mal geändert.
dbox2ilike
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Donnerstag 1. November 2007, 11:26

Beitrag von dbox2ilike »

Thanks for response. However, I wish I can read German. Please can you help with information of JTAG and JTAG tools for Dbox2.

thanks.
David
PT-1
Moderator english
Beiträge: 2458
Registriert: Donnerstag 20. Dezember 2001, 00:00
Kontaktdaten:

Beitrag von PT-1 »

As previosely explained there is no JTAG connectivity in the majority of Dboxes. Only a small handfull might have had the functionality.

If you buggered up a flash desolder the chips and flash them externally
dbox2ilike
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Donnerstag 1. November 2007, 11:26

Beitrag von dbox2ilike »

I wonder which JTAG cable and JTAG tools work for Dbox2.

Thanks.
David
PT-1
Moderator english
Beiträge: 2458
Registriert: Donnerstag 20. Dezember 2001, 00:00
Kontaktdaten:

Beitrag von PT-1 »

I wonder if you read our responses :gruebel: :gruebel: :gruebel:
dbox2ilike
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Donnerstag 1. November 2007, 11:26

Beitrag von dbox2ilike »

I did read your responses. I realized there is no JTAG interface on the PCB board. However, the interface can be extended directly from the processor pins. I wonder if anyone has ever home made a JTAG cable and jtagtools that work for DBOX2.

David
wolgade
Semiprofi
Semiprofi
Beiträge: 1313
Registriert: Donnerstag 2. Dezember 2004, 00:18
Kontaktdaten:

Beitrag von wolgade »

dbox2ilike hat geschrieben:However, the interface can be extended directly from the processor pins.
If you take a look at the PCB you'll find out that the CPU has no pins which could be extended. It's BGA.
Antworten