wenn ich normal über imageassistent versuche ne image zu installieren taucht diese meldung auf. und das bei jeder anderen image auch die ich auch versuche.
Code: Alles auswählen
odebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:1a:a6:34
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.202, My IP 192.168.2.203
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.202; our IP address is 192.168.2.203
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.2.202; our IP address is 192.168.2.203
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.202; our IP address is 192.168.2.203
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.2.202; our IP address is 192.168.2.203
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
Bank # 1: AMD 29DL323B (32M, bottom boot sect), 32 bit
Size: 8192 kB in 71 Sectors
Sector Start Addresses:
10000000 10004000 10008000 1000C000
10010000 10014000 10018000 1001C000
10020000 10040000 10060000 10080000
100A0000 100C0000 100E0000 10100000
10120000 10140000 10160000 10180000
101A0000 101C0000 101E0000 10200000
10220000 10240000 10260000 10280000
102A0000 102C0000 102E0000 10300000
10320000 10340000 10360000 10380000
103A0000 103C0000 103E0000 10400000
10420000 10440000 10460000 10480000
104A0000 104C0000 104E0000 10500000
10520000 10540000 10560000 10580000
105A0000 105C0000 105E0000 10600000
10620000 10640000 10660000 10680000
106A0000 106C0000 106E0000 10700000
10720000 10740000 10760000 10780000
107A0000 107C0000 107E0000
Using SCC ETHERNET device
TFTP from server 192.168.2.202; our IP address is 192.168.2.203
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
##
done
Bytes transferred = 675073 (a4d01 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 675009 Bytes = 659.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
/sbin/init: symbol lookup error: /lib/libc.so.6: undefined symbol: 1 ÿÿœâ€HÙ¹,, version GLIBC_2.0
<0>Rebooting in 180 seconds..
hoffe auf schneelle antowrten.. danke im vorraus
