Problem bei booten & Flashen (Logs inside)

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Antworten
Abuse
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Montag 5. Juni 2006, 18:41

Problem bei booten & Flashen (Logs inside)

Beitrag von Abuse »

Nabend,
ich versuche gerade meine Nokia dbox2 2xchip neu zu flashen mit dem D-BOX Imageflashingassistent Version 3.1.1
Weil sie nach einem vermutlichem Image Platzer nicht mehr startet.

Leider bleibt der Imageflashingassistent immer wieder beim flashen stehen.


Hier mal ein FlashLog :

Code: Alles auswählen

7debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID [URL]http://Hallenberg.com[/URL]
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.99.100, My IP 192.168.99.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: #################################################################
##########################################################
done
Bytes transferred = 626108 (98dbc hex)
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: #################################################################
#################################################
done
Bytes transferred = 579075 (8d603 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626044 Bytes = 611.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 579011 Bytes = 565.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f21000, end 01fae5c3 ... OK
Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.99.202:192.168.99.100:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:23:29
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.99.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.99.202, domain=, nis-domain=(none),
bootserver=192.168.99.100, rootserver=192.168.99.100, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.9.0 (2008-01-05 13:28:28 CET)
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault







Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1B83E00 REGS: c1b83d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b82000[68] 'tee' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1B83E00 C1B82000 0000001B 00001032 00000001 FFFFCCC3 C0129D9F
GPR08: 00000000 C0140000 0000001D C1B83D00 C0140000 00000000 30017380 10001878
GPR16: 00000030 00000000 7FFFF1A0 FFFFFFFF 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08190 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1B83E00 REGS: c1b83d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b82000[69] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1B83E00 C1B82000 0000001B 00001032 00000001 FFFFCF9E C0129D9F
GPR08: 00000000 C0140000 0000001D C1B83D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08210 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1B4DE00 REGS: c1b4dd50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b4c000[70] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1B4DE00 C1B4C000 0000001B 00001032 00000001 FFFFD27A C0129D9F
GPR08: 00000000 C0140000 0000001D C1B4DD00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFF960 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08290 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1B4DE00 REGS: c1b4dd50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b4c000[71] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1B4DE00 C1B4C000 0000001B 00001032 00000001 FFFFD556 C0129D9F
GPR08: 00000000 C0140000 0000001D C1B4DD00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08310 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1B09E00 REGS: c1b09d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b08000[72] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1B09E00 C1B08000 0000001B 00001032 00000001 FFFFD832 C0109D9
GPR08: 00000000 C0140000 0000001D C1B09D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFF930 00009032 C0140000 C010800, C0110000
GPR24: C0110000000000B C0140000 00000000 00001000 7FFFF000 C1C08390 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1B01E00 REGS: c1b01d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b00000[73] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1B01E00 C1B00000 0000001B 00001032 00000001 FFFFDB0C C0129D9F
GPR08: 00000000 C0140000 0000001D C1B01D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08410 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AF5E00 REGS: c1af5d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1af4000[74] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AF5E00 C1AF4000 0000001B 00001032 00000001 FFFFDDE8 C0129D9F
GPR08: 00000000 C0140000 0000001D C1AF5D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08490 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AF5E00 REGS: c1af5d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1af4000[75] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AF5E00 C1AF4000 0000001B 00001032 00000001 FFFFE0C4 C0129D9F
GPR08: 00000000 C0140000 0000001D C1AF5D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0110000000000B C0140000 00000000 00001000 7FFFF000 C1C08510 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AE7E00 REGS: c1ae7d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1ae6000[76] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AE7E00 C1AE6000 0000001B 00001032 00000001 FFFFE39E C0129D9F
GPR08: 00000000 C0140000 0000001D C1AE7D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08590 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1ADDE00 REGS: c1addd50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1adc000[77] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1ADDE00 C1ADC000 0000001B 00001032 00000001 FFFFE67A C0129D9F
GPR08: 00000000 C0140000 0000001D C1ADDD00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08610 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AD3E00 REGS: c1ad3d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1ad2000[78] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AD3E00 C1AD2000 0000001B 00001032 00000001 FFFFE956 C0129D9F
GPR08: 00000000 C0140000 0000001D C1AD3D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08690 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1ACDE00 REGS: c1acdd50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1acc000[79] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1ACDE00 C1ACC000 0000001B 00001032 00000001 FFFFEC32 C0129D9F
GPR08: 00000000 C0140000 0000001D C1ACDD00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08710 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AC3E00 REGS: c1ac3d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1ac2000[80] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AC3E00 C1AC2000 0000001B 00001032 00000001 FFFFEF0E C0129D9F
GPR08: 00000000 C0140000 0000001D C1AC3D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08790 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AC3E00 REGS: c1ac3d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1ac2000[81] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AC3E00 C1AC2000 0000001B 00001032 00000001 FFFFF1EA C0129D9F
GPR08: 00000000 C0140000 0000001D C1AC3D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08810 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AB1E00 REGS: c1ab1d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1ab0000[82] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AB1E00 C1AB0000 0000001B 00001032 00000001 FFFFF4C6 C0129D9F
GPR08: 00000000 C0140000 0000001D C1AB1D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08890 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1AABE00 REGS: c1aabd50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1aaa000[83] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1AABE00 C1AAA000 0000001B 00001032 00000001 FFFFF7A2 C0129D9F
GPR08: 00000000 C0140000 0000001D C1AABD00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08910 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1A9BE00 REGS: c1a9bd50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1a9a000[84] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1A9BE00 C1A9A000 0000001B 00001032 00000001 FFFFFA7E C0129D9F
GPR08: 00000000 C0140000 0000001D C1A9BD00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08990 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1A91E00 REGS: c1a91d50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1a90000[85] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1A91E00 C1A90000 0000001B 00001032 00000001 FFFFFD5A C0129D9F
GPR08: 00000000 C0140000 0000001D C1A91D00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08A10 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception
Floating point exception
kernel BUG at mmap.c:1204!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0020A40 XER: 00000000 LR: C0020A40 SP: C1A9BE00 REGS: c1a9bd50 TRAP: 1000 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1a9a000[86] 'rcS' Last syscall: -1
last math 00000000 last altivec 00000000
GPR00: C0020A40 C1A9BE00 C1A9A000 0000001B 00001032 00000001 00000036 C0129D9F
GPR08: 00000000 C0140000 0000001D C1A9BD00 C0140000 1004C070 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFF960 00009032 C0140000 C0110000 C0110000
GPR24: C0130000 0000000B C0140000 00000000 00001000 7FFFF000 C1C08A90 00000000
Call backtrace:
C0020A40 C000E9A8 C0013AF4 C00191A4 C0007058 C000371C
Floating point exception

-------------------------------------------------------------
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:Program FilesDBOX_IFAtftpkernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00197EC3BC7C erhalten
BootP: Request von 00197EC3BC7C erhalten

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Broadcom NetXtreme 57xx-Gigabit-Controller (1)
IP-Adresse des Netzwerkadapters: 192.168.99.100
IP-Adresse die die dbox bekommt: 192.168.99.202
Betriebssystem: Microsoft Windows Vista Professional (Build 6000)
CPU 1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz @ 1664 MHz
CPU 2: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz @ 1664 MHz
Dateiname des Images: 
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.1
------ Powered by [URL]http://www.dboxservice-hallenberg.de[/URL] ------



Manchmal sieht der flashlog auch so aus?!? :gruebel:



Code: Alles auswählen

'debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.99.100, My IP 192.168.99.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'kernel-cdk'.
Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01faf7b8 Unknown values in msr
NIP: 01FD80A8 XER: 8000497F LR: 01FD7FAC REGS: 01faf538 TRAP: 0200 DAR: FF002808
MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00020000 Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01faf438 Unknown values in msr
NIP: 01FD80A8 XER: A000497F LR: 01FD7FAC REGS: 01faf438 TRAP: 0200 DAR: 00000000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00A00008 01FAF528 00000000 01FAF650 01FAF8A8 00000010 00000008 FFFFFFFF
GPR08: 00000041 0015AF8A 00000001 01FAF530 00000000 00031B58 01FFB400 01F94000
GPR16: 80000010 00000000 00000010 01FAFC98 00001002 01FAF7A8 00000000 01FD609C
GPR24: 01FAF650 00000041 00000008 01FEF78C 01FAF530 01FAFF94 01FFB4A4 00000030
Call backtrace:
00000000 01FD8734 01FE6FB0 01FD65AC Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01faf0b0 Unknown values in msr
NIP: 01FD80A8 XER: A000497F LR: 01FD7FAC REGS: 01faf0b0 TRAP: 0200 DAR: 00000000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00A0000C 01FAF1A0 00000000 01FAF2C8 01FD671C 00000010 00000008 FFFFFFFF
GPR08: 00000041 0015D671 00000001 01FAF1A8 00000000 00031B58 01FFB400 01F94000
GPR16: 80000010 00000000 00000010 01FAFC98 00001002 01FAF428 00000000 01FD609C
GPR24: 01FAF2C8 00000041 00000008 01FEF78C 01FAF1A8 01FAFF94 01FFB4A4 00000030
Call backtrace:
00000000 01FD8734 01FE6FB0 01FD64E4 01FD6724 01FD609C 00000000
01FD8734 01FE6FB0 01FD65AC 01FD671C 01FD609C FFFFFFFF 01FD8734
01FE6FB0 01FDE7FC 01FDE0AC 01FE5BDC 01FE0F14 01FE10FC 01FDCC3C
01FD63B0
machine check

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.99.100, My IP 192.168.99.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01fafad8 Unknown values in msr
NIP: 01FD80A8 XER: 8000497F LR: 01FD7FAC REGS: 01fafad8 TRAP: 0200 DAR: FF002808
MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00020000 01FAFBC8 00000000 01FAFD00 00100000 00000010 FFFFFFFF FFFFFFFF
GPR08: 00000000 0000E000 00000001 01FAFBD0 00000000 00031B58 01FFB400 01F94000
GPR16: 80000010 00000000 00000010 01FAFC98 80004080 00000001 00000000 01FD609C
GPR24: 01FAFCF0 00000000 FFFFFFFF 01FEF764 01FAFBD0 01FAFF94 01FFB4A4 00000020
Call backtrace:
00000000 01FD8734 01FE6FB0 01FDE7FC 01FDECD8 01FDDC30 01FEE36C
01FDF948 01FDE0F8 01FEB1B4 01FE9A90 01FDCC34 01FD63B0
machine check

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.99.100, My IP 192.168.99.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-lcd'.
Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01fafb78 Unknown values in msr
NIP: 01FD80A8 XER: 8000497F LR: 01FD7FAC REGS: 01fafb78 TRAP: 0200 DAR: FF002808
MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00020000 01FAFC68 00000000 01FAFDA0 00100000 00000010 FFFFFFFF FFFFFFFF
GPR08: 00000000 0000E000 00000001 01FAFC70 00000000 00031B58 01FFB400 01F94000
GPR16: 80000010 00000000 00000010 01FAFC98 80004080 00000001 00000000 01FD609C
GPR24: 01FAFD90 00000000 FFFFFFFF 01FEF764 01FAFC70 01FAFF94 01FFB4A4 00000020
Call backtrace:
01FEE994 01FD8734 01FE6FB0 01FDE7FC 01FDE0AC 01FEB1CC 01FE9A90
01FDCC34 01FD63B0
machine check

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.99.100, My IP 192.168.99.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ##############################################################
#########################################################
done
Bytes transferred = 626108 (98dbc hex)
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: #########################################################
###############################################
done
Bytes transferred = 57904z (8d603 hex)
Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01faf900 Unknown values in msr
Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01faf580 Unknown values in msr
NIP: 01FD80A8 XER: A000497F LR: 01FD7FAC REGS: 01faf580 TRAP: 0200 DAR: 00000000
MSR: 00000ew2 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00A00008 Bus Fault @ 0x01fd80a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01faf200 Unknown values in msr
NIP: 01FD80A8 XER: A000497F LR: 01FD7FAC REGS: 01faf200 TRAP: 0200 DAR: 00000000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00A00000 01FAF2F0 00000000 01FAF418 01FAF670 00000010 00000008 FFFFFFFF
GPR08: 00000041 0015AF67 00000001 01FAF2F8 00000000 00031B58 01FFB400 01F94000
GPR16: 80000010 00000000 00000010 01FAFC98 00000EW2 01FAF570 00000000 01FD609C
GPR24: 01FAF418 00000041 00000008 01FEF78C 01FAF2F8 01FAFF94 01FFB4A4 00000030
Call backtrace:
31204952 01FD8734 01FE6FB0 01FD65AC 01FD671C 01FD609C 31204952
01FD8734 01FE6FB0 01FD6558 01FD671C 01FD609C 00000003 01FD8734
01FD87C0 01FDE1F8 01FE5BDC 01FE0F14 01FE10FC 01FDCC3C 01FD63B0
machine check

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.99.100, My IP 192.168.99.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ###################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ############################################################
#####################################################
done
Bytes transferred = 626108 (98dbc hex)
Using SCC ETHERNET device
TFTP from server 192.168.99.100; our IP address is 192.168.99.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: #############################################################
###############################################
done
Bytes transferred = 579075 (8d603 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626044 Bytes = 611.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 579011 Bytes = 565.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f21000, end 01fae5c3 ... OK
Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.99.202:192.168.99.100:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:23:29
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.99.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.99.202, domain=, nis-domain=(none),
bootserver=192.168.99.100, rootserver=192.168.99.100, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init

-------------------------------------------------------------
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-fb
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
BootP: Request von 00197EC3BC7C erhalten
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
BootP: Request von 00197EC3BC7C erhalten
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:Program FilesDBOX_IFAtftpkernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1E2329 erhalten
BootP: ARP-Eintrag mit IP: 192.168.99.202 und Mac: 00509C1E2329 gesetzt
BootP: Antwort an 00509C1E2329 gesendet
TFTP: Sende C:Program FilesDBOX_IFAtftplogo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:Program FilesDBOX_IFAtftpkernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:Program FilesDBOX_IFAtftpu-initrd
TFTP: Transfer erfolgreich beendet

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Broadcom NetXtreme 57xx-Gigabit-Controller (1)
IP-Adresse des Netzwerkadapters: 192.168.99.100
IP-Adresse die die dbox bekommt: 192.168.99.202
Betriebssystem: Microsoft Windows Vista Professional (Build 6000)
CPU 1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz @ 1664 MHz
CPU 2: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz @ 1664 MHz

 Zwei Flashs
DBOX-IFA Version: 3.1
------ Powered by http://www.dboxservice-hallenberg.de ------

Aber bei beiden bleibt der hallenberg stehn und flasht mir kein Image rauf.







Und auch mal ein Bootlog:

Code: Alles auswählen

'debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-17.a7.1b.07.00.00-57
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 162964
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Dec 24 2007 - 11:57:50)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . . | / - .  | . / -   done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1  0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 669865 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 669801 Bytes = 654.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.35.3-dbox2 (image@Server) (gcc version 3.4.6) #21 Mo Dez 24 11:58:22 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:23:29
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2007-12-24 12:02:36 CET)
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
/etc/init.d/rcS: line 106: /var/etc/init.d/rcS: not found
Cannot run '/etc/init.d/start': No such file or directory


Sieht da jmd einen HW defekt? Oder hat ein Idee?
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: Problem bei booten & Flashen (Logs inside)

Beitrag von seife »

Abuse hat geschrieben:Sieht da jmd einen HW defekt?
Sieht so aus. Was sagt denn der memtest des Bmon?
Abuse
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Montag 5. Juni 2006, 18:41

Re: Problem bei booten & Flashen (Logs inside)

Beitrag von Abuse »

%debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-17.a7.1b.07.00.00-57
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: Problem bei booten & Flashen (Logs inside)

Beitrag von seife »

Dann wird es wohl was anderes sein (wobei ich nicht weiss, wie "streng" dieser memtest ist). Aber für mich, als HW-Laien, sieht es doch sehr nach Hardware-Schaden aus.
Abuse
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Montag 5. Juni 2006, 18:41

Re: Problem bei booten & Flashen (Logs inside)

Beitrag von Abuse »

Mal gucken ob noch ein Hardware "pro" rumguckt. :-)

Danke erstmal für erste Einschätzungen.
MPC823
Erleuchteter
Erleuchteter
Beiträge: 448
Registriert: Samstag 26. November 2005, 00:35

Re: Problem bei booten & Flashen (Logs inside)

Beitrag von MPC823 »

Wenn man einen "ausführlichen" ramtest auf einem PC nimmt und vergleicht wie lange dieser durchläuft und dazu noch wie teilweise erst nach mehreren Durchläufen ein Fehler gefunden wird, würde ich sagen das es nur ein grober Test sein kann.
Das bedeutet wenn der Test einen Fehler findet ist das Ram definitiv hinüber , wenn er keinen Fehler findet heisst es noch lange nicht das es Okay ist.
Ich würde auch auf einem Hardwaredefekt tippen.

Um einigermassen sicher zu gehen würde ich aber denoch mal an einem anderen PC das Flashen versuchen auf dem es definitiv mit anderen Boxen geht um ganz sicher zu gehen das es nicht an Deiner Umgebung liegt.


Martin
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06
Kontaktdaten:

Re: Problem bei booten & Flashen (Logs inside)

Beitrag von gurgel »

dürfte CPU defekt sein.
Abuse
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Montag 5. Juni 2006, 18:41

Re: Problem bei booten & Flashen (Logs inside)

Beitrag von Abuse »

Hab jetzt mal meine 2te Box neugemacht.
Und kann nun auch ein Konfigurationsfehler 100% ausschließen.

Der Debug Modus wird auch nur noch halb oder mal stark verändert im Display angezeigt.

Ist also definitiv ein Hardware schaden :(
Antworten