dBox2 bootet nicht mehr

Alles eine Frage des Images
Antworten
Mickey S.
Einsteiger
Einsteiger
Beiträge: 108
Registriert: Dienstag 21. Dezember 2004, 14:52

dBox2 bootet nicht mehr

Beitrag von Mickey S. »

Hi!

Bekomme seit kurzem die Box nicht mehr gestartet. Das COM-Log sieht so aus:

Code: Alles auswählen

edebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-d6.f4.80.07.00.00-51
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 165808
verify sig: 262
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox) (Dec 21 2007 - 09:56:49)

CPU:   PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 694221 bytes loaded to 0x100000
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    694157 Bytes = 677.9 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.35.5-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 Fr 21. Dez 0
9:53:57 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:cc:95
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.8.2 (2007-12-21 09:55:47 CET)
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
SQUASHFS error: lzma_fs returned unexpected result 0x1
SQUASHFS error: Unable to read page, block 6c99, size 6efc
Bad emulation rcS/10
 NIP: 1001c5b4 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
 pte @ 0x1001c5b4:  (0xc1d07100)->(0xc1d06070)->0x01cb6889
 RPN: 01cb6 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1cb65b4  pte @ 0xc1cb65b4: no pmd
Cannot run '/etc/init.d/start': No such file or directory

Please press Enter to activate this console.
Bad emulation sh/12
 NIP: 1001c5b4 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
 pte @ 0x1001c5b4:  (0xc1d07100)->(0xc1ec8070)->0x01cb6889
 RPN: 01cb6 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1cb65b4  pte @ 0xc1cb65b4: no pmd

Please press Enter to activate this console.
Bad emulation sh/18
 NIP: 1001c5b4 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
 pte @ 0x1001c5b4:  (0xc1d07100)->(0xc1ec8070)->0x01cb6889
 RPN: 01cb6 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1cb65b4  pte @ 0xc1cb65b4: no pmd

Please press Enter to activate this console.
Bad emulation sh/19
 NIP: 1001c5b4 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
 pte @ 0x1001c5b4:  (0xc1d07100)->(0xc1ec8070)->0x01cb6889
 RPN: 01cb6 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1cb65b4  pte @ 0xc1cb65b4: no pmd

Please press Enter to activate this console.
Bad emulation sh/20
 NIP: 1001c5b4 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0
 pte @ 0x1001c5b4:  (0xc1d07100)->(0xc1ec8070)->0x01cb6889
 RPN: 01cb6 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1cb65b4  pte @ 0xc1cb65b4: no pmd

Please press Enter to activate this console.
...
Hardwarefehler?


CU!

-Mike
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: dBox2 bootet nicht mehr

Beitrag von seife »

Erstmal ist nur das root-FS kaputt. Könnte ein defekter Flashbaustein sein. Flashe mal neu (wenn das noch geht).
JtG-Riker
Image-Team
Beiträge: 1015
Registriert: Freitag 7. Februar 2003, 18:37
Kontaktdaten:

Re: dBox2 bootet nicht mehr

Beitrag von JtG-Riker »

Ich tipp auf defektem Ram

Starte mal die Box mit Pfeil nach oben Taste und poste das hier was dort ausgegeben wird.

Gruß Riker
Mickey S.
Einsteiger
Einsteiger
Beiträge: 108
Registriert: Dienstag 21. Dezember 2004, 14:52

Re: dBox2 bootet nicht mehr

Beitrag von Mickey S. »

Hi!

Also, Image flashen um den Flash noch mal neu zu schreiben endet mit:

Code: Alles auswählen

BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Dann also mal den Mem-Test gestartet und boot net auf der Konsole eingegeben:

Code: Alles auswählen

edebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-d6.f4.80.07.00.00-51
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
dbox2:root> boot net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
Der Speicher scheint also in Ordnung zu sein, lediglich wird wohl der BootP-Request nicht beantwortet.

Ich habe die dBox2 per Cross-TP und Nullmodemkabel verbunden, PC: 192.168.1.54, Box: 192.168.1.209 (lt. IP Adressfeld im dBoxII-Bootmanager). Die Netzwerkkarte im PC steht fest auf 10MBit/s und Halfduplex.

Was hab' ich nicht beachtet?


CU!

-Mike
Mickey S.
Einsteiger
Einsteiger
Beiträge: 108
Registriert: Dienstag 21. Dezember 2004, 14:52

Re: dBox2 bootet nicht mehr

Beitrag von Mickey S. »

Moment, hab' grad festgestellt, ich habe das RARP-Packet-Driver/Dualcore-Problem...

Melde mich wieder nach weiteren Versuchen!


CU!

-Mike
Mickey S.
Einsteiger
Einsteiger
Beiträge: 108
Registriert: Dienstag 21. Dezember 2004, 14:52

Re: dBox2 bootet nicht mehr

Beitrag von Mickey S. »

Hi!

Alles klar! :o) Nachdem ich ein neues Image aufgespielt hatte, war die Geschichte behoben. Fragt sich allerdings nur, warum die Datenstruktur kaputt gegangen war. Sporadisch hatte es ja funktioniert, die Box neu zu starten und wenn sie einmal lief, dann war auch alles erste Sahne. Nur lediglich ein erneuter Startversuch wurde dann zum Vabanquespiel. ;o)


CU!

-Mike
Antworten