Keine Kanäle verfügbar-An die Technikprofis

Domestos & Derivate
Antworten
Locke2008
Beiträge: 2
Registriert: Dienstag 22. April 2008, 19:05

Keine Kanäle verfügbar-An die Technikprofis

Beitrag von Locke2008 »

Hallo erstmal,

ich hab hier eine Nokia dbox2 die leider keine Kanäle findet. Bei der originalen Betanova software zeigte die Box mir den UD4 Code an. Also neues Image geflasht hat nichts gebracht, Tuner ausgetauscht, immernoch nix. Hier mal ein Bootlog vielleicht kann mir einer der Technikprofis ja ein Tip geben ich weiß nähmlich nicht mehr weiter. Signal ist da, eine dbox läuft einwandfrei.



Ich danke im voraus und hoffe jemand kann mir was dazu sagen.

debug: DDF: Calibrating delay loop... debug: DDF: 67
.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-83.a2.1c.07.00.00-6e
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-83.a2.1c.07.00.00-6e
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 162992
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Jan 18 2008 - 21:28:14)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 669940 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 669876 Bytes = 654.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36-dbox2 (image@Server) (gcc version 3.4.6) #11 Fr Jan 18 21:2
8:45 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:40:0d:87
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-01-18 21:32:56 CET)
Zuletzt geändert von Locke2008 am Mittwoch 23. April 2008, 13:09, insgesamt 1-mal geändert.
MTM
Foren-Moderator
Beiträge: 944
Registriert: Freitag 21. Januar 2005, 16:18

Re: Keine Kanäle verfügbar-An die Technikprofis

Beitrag von MTM »

Hallo,
##### Image-Version: (UNERWÜNSCHTER INHALT, Anm. d. Forenbetreibers) #####
Mit so einem Image findest du hier garantiert keine Hilfe!
UNERWÜNSCHTER INHALT, Anm. d. Forenbetreibers <-- Warum ?

MfG,
MTM.
Locke2008
Beiträge: 2
Registriert: Dienstag 22. April 2008, 19:05

Re: Keine Kanäle verfügbar-An die Technikprofis

Beitrag von Locke2008 »

Hi, ja Sorry bin neu hier. Reicht es wenn ich den Teil ab Image Version einfach Lösche? Ich meine ich hab ja keine fragen zum image. Oder muß ich jetzt wirklich eins von JTG raufmachen um hier hilfe zu bekommen?

Gruß
wolgade
Semiprofi
Semiprofi
Beiträge: 1313
Registriert: Donnerstag 2. Dezember 2004, 00:18
Kontaktdaten:

Re: Keine Kanäle verfügbar-An die Technikprofis

Beitrag von wolgade »

Locke2008 hat geschrieben:Reicht es wenn ich den Teil ab Image Version einfach Lösche? I
Nö.
ich hab ja keine fragen zum image.
Wurscht.
muß ich jetzt wirklich eins von JTG raufmachen
JtG oder ein anderes hier unterstütztes Image, wie YADI, DietmarW oder Novatux.

Unabhängig davon, daß es in dieser Frage ums Prinzip geht, weiß hier auch niemand, was andere Imagebäcker so treiben. Da werden auch schon mal unpassende Kernelmodule mit Gewalt geladen. Dieses Gebastel will hier niemand debuggen.
bosmann
Einsteiger
Einsteiger
Beiträge: 268
Registriert: Sonntag 3. September 2006, 14:13

Re: Keine Kanäle verfügbar-An die Technikprofis

Beitrag von bosmann »

ich habe das gleiche problem, hier mein log:

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0  mID 01

debug: feID dd    gtxID 0b

debug: fpID 5a     dsID 01-a2.94.27.07.00.00-2b

debug: HWrev X5  SWrev 0.81

debug: B/Ex/Fl(MB) 16/16/08

WATCHDOG reset enabled

dbox2:root> debug: 

BOOTP/TFTP bootstrap loader (v0.3)

debug: 

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed



Flash-FS bootstrap loader (v1.5)



Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036



will verify ELF image, start= 0x800000, size= 170380

verify sig: 262

Branching to 0x40000





U-Boot 2009.08 (Tuxbox) (May 05 2010 - 07:21:36)



CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

       Watchdog enabled

I2C:   ready

DRAM:  32 MB

FLASH:  8 MB

Scanning JFFS2 FS:   .  | / - \ | / - \ |  done.

env: found console with value null

env: found baudrate with value 9600

env: found dbox_duplex with value 0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

env: found lcd_bias with value 0

FB:    ready

In:    serial

Out:   serial

Err:   serial

Net:   SCC ETHERNET

LCD:   ready



Options:

  1: Console on null

  2: Console on ttyS0

  3: Console on framebuffer

Select option (1-3), other keys to stop autoboot:  1  0 

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 669332 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

   Image Name:   Linux-2.4.37.9-dbox2

   Image Type:   PowerPC Linux Kernel Image (gzip compressed)

   Data Size:    669268 Bytes = 653.6 kB

   Load Address: 00000000

   Entry Point:  00000000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK
ich glaube es ist ein hardware-problem. habe noch 2 boxen und die laufen einwandfrei an gleichem antennenanschluss.
auf alle 3 boxen ist dietmarw-image vom 05.05.10.

kann mir jemand sagen welches bauteil defekt sein könnte?

danke und gruß!
Houdini
Developer
Beiträge: 2183
Registriert: Mittwoch 10. Dezember 2003, 07:59

Re: Keine Kanäle verfügbar-An die Technikprofis

Beitrag von Houdini »

bis dahin sieht alles gut aus
env: found console with value null
log aktivieren! (Expert Bootconsole auf seriell stellen)
bosmann
Einsteiger
Einsteiger
Beiträge: 268
Registriert: Sonntag 3. September 2006, 14:13

Re: Keine Kanäle verfügbar-An die Technikprofis

Beitrag von bosmann »

hier kompletter log mit kanalsuche bis "keine kanäle gefunden" kam:

Code: Alles auswählen

|  done.

env: found console with value ttyS0

env: found baudrate with value 9600

env: found dbox_duplex with value 0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

env: found lcd_bias with value 0

FB:    ready

In:    serial

Out:   serial

Err:   serial

Net:   SCC ETHERNET

LCD:   ready



Options:

  1: Console on null

  2: Console on ttyS0

  3: Console on framebuffer

Select option (1-3), other keys to stop autoboot:  1  0 

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 669332 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

   Image Name:   Linux-2.4.37.9-dbox2

   Image Type:   PowerPC Linux Kernel Image (gzip compressed)

   Data Size:    669268 Bytes = 653.6 kB

   Load Address: 00000000

   Entry Point:  00000000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

Linux version 2.4.37.9-dbox2 (dietmarw@lalelu.li) (gcc version 3.4.6) #2 Wed May 5 07:21:55 CEST 2010

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=0

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30828k available (1140k kernel code, 340k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:17:7a:39

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

 Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x00580000 : "root (squashfs+lzma)"

0x00580000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.14.4 (2010-05-05 07:23:59 CEST)

starting pid 8, tty '': '/etc/init.d/sysinit'

[BOOT] running /etc/init.d/sysinit

Thu Jan  1 01:00:00 UTC 1970

starting pid 22, tty '': '/etc/init.d/rcS'



Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

[BOOT] running /etc/init.d/S05drivers

tuxbox: no IDE-Interface detected

Detected STB:

	Vendor: Nokia

	Model: D-BOX2  (2 flash chips)

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

ves1x93: Detected ves1893a rev2

DVB: registering frontend 0:0 (VES1893)...

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av: AVIA 500 LB4 found, sptsfix is off

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters enabled.

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

starting /var/etc/init.d/S09lcdip ...

starting /etc/init.d/S10network ...

starting /etc/init.d/S10rtc ...

starting /etc/init.d/S15syslogd ...

starting /etc/init.d/S18rdate ...

Jan  1 02:00:10 dbox syslog.info syslogd started: BusyBox v1.14.4

starting /etc/init.d/S20inetd ...

starting /etc/init.d/S25cdkVcInfo ...

starting /etc/init.d/S30autofs ...

[BOOT] Starting the automounter

starting /etc/init.d/S40tuxmaild ...

starting /etc/init.d/S99gui ...

Jan  1 02:00:15 dbox daemon.err automount[168]: failed to load map$Id: sectionsd.cpp,v 1.319 2010/02/21 10:14:15 rhabarber1848 Exp $

[sectionsd] Caching max 6000 events

[sectionsd] Caching 14 days

[sectionsd] Caching 6 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.

[camd] ca system id: 1702

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.

[timerd] woke up from timer? false!

$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $

[frontend] uncommitted_switch_mode 0 auto_fec 0

avia_gt_core: masking unhandled irq reg 0 bit 7

[camd] no card is in slot #2

[camd] no card is in slot #1

/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory

/var/tuxbox/config/zapit/bouquets.xml: No such file or directory

/tmp/currentservices.xml: No such file or directory

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[CVideo::setVideoFormat] output format: 4:3(LB)

neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)

neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[rcinput] no file /var/tuxbox/config/rc.conf was found

/dev/input/event1: No such file or directory

$Id: moviebrowser.cpp,v 1.39 2010/04/21 10:36:18 dbt Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for reading.

CMovieBrowser::loadSettings failed

[mb]->refreshFilterList 20

[neutrino] menue setup

[network config] Instance created

loading locales: scandir: No such file or directory

[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) 

[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no

[neutrino] registering as event client

[scan-setup] received 31 sats

nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[yhttpd] Webserver starting...

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[neutrino] no file /var/tuxbox/config/init.end was found

[neutrino] initialized everything

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix12/Regular)

[scan-setup] received 31 sats

[neutrino] TP_scan 0 TP_freq  TP_rate  TP_fec 1 TP_pol 0 TP_mod 6 TP_diseqc 0

[scan.cpp] executing /var/tuxbox/config/scan.start.

sh: /var/tuxbox/config/scan.start: not found

Datei /var/tuxbox/config/scan.start fehlt. Bitte erstellen, wenn gebraucht.

File /var/tuxbox/config/scan.start not found. Please create if needed.

: No such file or directory

re-starting /bin/sectionsd

[sectionsd] starting '/bin/sectionsd'

$Id: sectionsd.cpp,v 1.319 2010/02/21 10:14:15 rhabarber1848 Exp $

[CBasicClient] connect failed.

/tmp/sectionsd.sock: No such file or directory

[sectionsd] getting configuration from environment, starting paused

GETENVI(auto_scanning) = 0

GETENVL(secondsToCache) = 1209600

GETENVL(oldEventsAre) = 3600

GETENVL(secondsExtendedTextCache) = 21600

[CBasicClient] connect failed.

/tmp/sectionsd.sock: No such file or directory

GETENVI(max_events) = 6000

GETENVI(ntprefresh) = 30

GETENVI(ntpenable) = 0

GETENVS(ntp_system_cmd) = /sbin/rdate -s 130.60.7.42

GETENVS(epg_dir) = 

GETENVB(update_eit) = 1

[CBasicClient] connect failed.

/tmp/sectionsd.sock: No such file or directory

GETENVB(bTimeCorrect) = 0

GETENVI(debug) = 0

[sectionsd] Caching max 6000 events

[CBasicClient] connect failed.

/tmp/sectionsd.sock: No such file or directory

[sectionsd] Caching 14 days

[sectionsd] Caching 6 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

[CBasicClient] connect failed.

/tmp/sectionsd.sock: No such file or directory

/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory

/var/tuxbox/config/zapit/bouquets.xml: No such file or directory

/tmp/currentservices.xml: No such file or directory
Antworten