Philips Dbox fährt nicht mehe hoch

Domestos & Derivate
checker
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Samstag 20. April 2002, 03:47

Philips Dbox fährt nicht mehe hoch

Beitrag von checker »

Hallo !

ich habe hier ein problem mit meiner philips dbox2,sie lief jahrelang ohne probleme gestern ist aber mittendrin das bild eingefrohren als ich sie neustarten wollte blieb sie hängen.

hier ist das bootlog:

Code: Alles auswählen


debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-39.80.01.08.00.00-27
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 0 debug:
 1 debug: 
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 0 debug:
 1 debug: 
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.145
debug: Sending TFTP-request for file c0a80091
Gdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-39.80.01.08.00.00-27
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 174564
verify sig: 262
Branching to 0x40100


U-Boot 2011.06 (Tuxbox) (15.07.11 18:30:53)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MiB
Flash: 8 MiB
Using default environment

Scanning JFFS2 FS: . done.
find_inode failed for name=boot.conf
load: Failed to find inode
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC
LCD:   ready

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 666609 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
   Image Name:   Linux-2.4.37.11-dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    666545 Bytes = 650.9 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.37.11-dbox2 (riker@vmware-suse) (gcc version 3.4.6) #1 Fr 15. 
Jul 17:43:40 CEST 2011
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 
dbox_duplex=
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c:de:bb
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of C00D8104 SP: C01F3C20 REGS: c01f<4>Oops: kernel 
access of bad area, sig: 11
NIP: C00D8140 XER: C000C03B LR: DAR: 0300007C, DSISR: C0000000
3b70 TRAP: 0300    Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
00000000
TASK = c01f2000[1] 'swapper' Last syscall: 120 
last math 00000000 last altivec GPR08: C0180000 C0160000 0300000GPR00: B169D800 
C01F3C20 C01F2000 00000000 0001750E EF70A92D 00000000 C1F7C200 
0 00000000 00001032 C0160000 C010 C017DF9C 55303033 00032724 00000001 01F8C000 
GPR16: 00000000 00000000 000010080049 C0A8001B 
F3CD8 00000111 
Call backtrace: C1F67080 00000000 00000000 C1F7C200 00000002 C0A
C1F1F000 C00DAD8C C00C9528 C00C9644 C00C97A8 C0014AF4 C0003C64 
                                                               C0153424 C00022A0
 C000515C 
C0002AE0 00000000 C000F8D8 C000FB6C C000FDB0 C0152968 C0152C08 
ng
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not synci
mehr passiert nicht =(

hoffe ihr könnt aus dem bootlog was erkennen.
Liontamer
Klöppelliese
Beiträge: 1644
Registriert: Donnerstag 8. August 2002, 12:51

Re: Philips Dbox fährt nicht mehe hoch

Beitrag von Liontamer »

Hallo,

es gibt einen Kernel OOPS bei einem Zugriff auf rt_hash_mask in der Zeile

Code: Alles auswählen

IP: routing cache hash table of

Code: Alles auswählen

printk(KERN_INFO "IP: routing cache hash table of %u buckets, %ldKbytes\n",
       rt_hash_mask,
       (long) (rt_hash_mask * sizeof(struct rt_hash_bucket)) / 1024);
Warum, kann ich momentan auch nicht sagen.
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: Philips Dbox fährt nicht mehe hoch

Beitrag von seife »

Ich würde mal versuchen, ein neues Image zu flashen. Evtl. ist ja ein Bit im FLASH gekippt.
Zuvor vielleicht noch nen memory test.
Ein yadd zu booten ist auch ein weg um einige Hardware-Probleme zu finden.
checker
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Samstag 20. April 2002, 03:47

Re: Philips Dbox fährt nicht mehe hoch

Beitrag von checker »

ok mit einem anderen image komme ich etwas weiter:

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-39.80.01.08.00.00-27
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 0 debug:
 1 debug: 
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 0 debug:
U-Boot 2009.08 (Tuxbox) (04.12.09 09:04:31) 

CPU:   PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
LCD:   ready

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671124 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
   Image Name:   Linux-2.4.37.7-dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    671060 Bytes = 655.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.37.7-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #1 Fr 4. Dez 08:
42:33 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 
dbox_duplex=
Decrementer Frequency = 247125000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c:de:bb
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.15.2 (2009-12-04 09:15:43 CET)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
insmod: unresolved symbol rpc_wake_up_task
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
insmod: unresolved symbol add_timer
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: unresolved symbol ppc_md
insmod: unresolved symbol dbox2_fp_queue_alloc
insmod: unresolved symbol add_timer
insmod: unresolved symbol dbox2_fp_reset_cam
insmod: unresolved symbol dvb_register_i2c_bus
insmod: unresolved symbol dvb_register_adapter
insmod: unresolved symbol dvb_register_device
insmod: unresolved symbol dbox2_fp_sec_diseqc_cmd
insmod: unresolved symbol dbox2_fp_reset
insmod: unresolved symbol avia_av_set_stc
insmod: unresolved symbol avia_gt_gv_copyarea
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
insmod: unresolved symbol avia_gt_ir_exit
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pig_show
insmod: unresolved symbol dvb_unregister_i2c_device
insmod: unresolved symbol avia_av_stream_type_set
insmod: unresolved symbol avia_gt_dmx_get_ucode_info
insmod: unresolved symbol avia_gt_napi_dvr_send
insmod: unresolved symbol avia_av_write
Fri Dec 13 21:45:52 CET 1901
$Id: sectionsd.cpp,v 1.315 2009/11/30 21:50:26 seife Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[sectionsd] /var/tuxbox/config/neutrino.conf not found
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
unable to open /var/tuxbox/config/scan.conf for reading
[sectionsd] open dmx: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[timerd] FP_IOCTL_IS_WAKEUP: Bad file descriptor
[sectionsd] getUTC: open: No such file or directory
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
[frontend.cpp:CFrontend:63] /dev/dvb/adapter0/frontend0: No such file or directo
ry
[sectionsd] getUTC: open: No such file or directory
/var/tuxbox/config/zapit/services.xml: No such file or directory
[controld] Boxtype detected: (2, Philips D-BOX2)
[controld] /dev/dvb/adapter0/video0: No such file or directory
[camd] /dev/dvb/adapter0/ca0: No such file or directory
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dbox/avs0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:CVideo:40] /dev/dvb/adapter0/video0: No such file or directory
[CVideo::setVideoFormat] output format: 4:3(LB)
[CVideo] /dev/dbox/avs0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[sectionsd] getUTC: open: No such file or directory
zapit shot down :)
Waiting for timerd (max. 5 seconds)
[sectionsd] getUTC: open: No such file or directory
Waiting for timerd (max. 4 seconds)
[sectionsd] getUTC: open: No such file or directory
Waiting for timerd (max. 3 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Waiting for timerd (max. 2 seconds)
[sectionsd] getUTC: open: No such file or directory
Waiting for timerd (max. 1 seconds)
[sectionsd] getUTC: open: No such file or directory
Going to halt system now ...
starting pid 167, tty '': '/etc/init.d/halt'
open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Unmounting 'tmpfs' on '/tmp'
mcho: applet not found
umount: can't umount /tmp: Device or resource busy
mcho: applet not found
mcho: applet not found
Unmounting 'jffs2' on '/var'
mcho: applet not found
[sectionsd] getUTC: open: No such file or directory
mcho: applet not found
mcho: applet not found
[sectionsd] getUTC: open: No such file or directory
Ready to shutdown system...
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system halt
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-39.80.01.08.00.00-27
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 0 debug:
 1 debug: 
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 0 debug:
 1 debug: 
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.142
debug: Sending TFTP-request for file c0a8008e
debug: Sending TFTP-request for file c0a8008e
debug: Sending TFTP-request for file c0a8008e
hoffe das hilft weiter