jetzt ist er fertig geworden. woran erkenn ich das es ok war???
als letztes stand nur: touch .nano da. fertig????
cdkroot hat nun 2269 dateien 152 ordner und ist 141,979.180 bytes gross
tftboot hat 2 dateien kernel-cdk und das ppcboot
Cygwin und CDK nochmals
-
mediom
- Erleuchteter
- Beiträge: 505
- Registriert: Freitag 20. Juli 2001, 00:00
und was hast du anders gemacht als ich?
$ gcc --version
gcc (GCC) 3.1.1 20020718 (prerelease)
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ autoconf --version
autoconf (GNU Autoconf) 2.52
Written by David J. MacKenzie.
Copyright 1992, 1993, 1994, 1996, 1999, 2000, 2001
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ automake --version
automake (GNU automake) 1.4-p5
Copyright (C) 1999, 2001 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Tom Tromey <tromey@cygnus.com>
$ libtool --version
ltmain.sh (GNU libtool) 1.4.2 (1.922.2.54 2001/09/11 03:33:37)
$ gettext --version
gettext (GNU gettext) 0.10.40
Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Ulrich Drepper.
$ make --version
GNU Make version 3.79.1, by Richard Stallman and Roland McGrath.
Built for i686-pc-cygwin
Copyright (C) 1988, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Report bugs to <bug-make@gnu.org>.
$ gcc --version
gcc (GCC) 3.1.1 20020718 (prerelease)
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ autoconf --version
autoconf (GNU Autoconf) 2.52
Written by David J. MacKenzie.
Copyright 1992, 1993, 1994, 1996, 1999, 2000, 2001
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ automake --version
automake (GNU automake) 1.4-p5
Copyright (C) 1999, 2001 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Tom Tromey <tromey@cygnus.com>
$ libtool --version
ltmain.sh (GNU libtool) 1.4.2 (1.922.2.54 2001/09/11 03:33:37)
$ gettext --version
gettext (GNU gettext) 0.10.40
Copyright (C) 1995-1997, 2000, 2001 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Ulrich Drepper.
$ make --version
GNU Make version 3.79.1, by Richard Stallman and Roland McGrath.
Built for i686-pc-cygwin
Copyright (C) 1988, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Report bugs to <bug-make@gnu.org>.
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
mediom
- Erleuchteter
- Beiträge: 505
- Registriert: Freitag 20. Juli 2001, 00:00
-
CarTrinoZap
- Einsteiger
- Beiträge: 273
- Registriert: Mittwoch 29. Mai 2002, 01:37
Wenn ich mich mal "einschalten" darf...
Seehr spannend, Euren Realtime-Postings zuzuschauen
Ich hab das Ganze vor ner Woche auch schonmal gewagt... Bei meinem
400er PII dauerte das Ganze 10h und der Rechner hängte sich auf
Und das Ganze in zwei Versuchen *grrr*; habe nun erstmal keine Kraft
mehr, mir das nochmal zuzumuten. Deswegen bin ich gespannt auf den
weiteren Verlauf (bei Euch)
Allerdings hab ich gehört, daß man am Besten sämtliche Lib es anklicken
sollte... Weil sich nach Telefonmann von vier, einige selbst-anklicken,
bleibt nur noch die eine (ohne Versionsnummer) übrig... Die sollte man
sicherheitshalber auch mal "mitnehmen"...
Das Problem mit der ./run-cygwin.sh hab ich auch gehabt...
Sorry, Edit: Mir fällt noch ein, daß oben am Fensterrand beim Absturz "cat"
stand... die letzten Meldungen hab ich nicht mehr... Aber die Funktion "cat"
macht glaub ich unter Cygwin Probleme ! Keine Ahnung warum...
Ausserdem könnte es sein, daß der Ellenlange Konsolen-Log evtl. irgend-
welche Overflows erzeugt. Nur ne Vermutung, falls es jemanden interes-
siert !
Seehr spannend, Euren Realtime-Postings zuzuschauen
Ich hab das Ganze vor ner Woche auch schonmal gewagt... Bei meinem
400er PII dauerte das Ganze 10h und der Rechner hängte sich auf
Und das Ganze in zwei Versuchen *grrr*; habe nun erstmal keine Kraft
mehr, mir das nochmal zuzumuten. Deswegen bin ich gespannt auf den
weiteren Verlauf (bei Euch)
Allerdings hab ich gehört, daß man am Besten sämtliche Lib es anklicken
sollte... Weil sich nach Telefonmann von vier, einige selbst-anklicken,
bleibt nur noch die eine (ohne Versionsnummer) übrig... Die sollte man
sicherheitshalber auch mal "mitnehmen"...
Das Problem mit der ./run-cygwin.sh hab ich auch gehabt...
Sorry, Edit: Mir fällt noch ein, daß oben am Fensterrand beim Absturz "cat"
stand... die letzten Meldungen hab ich nicht mehr... Aber die Funktion "cat"
macht glaub ich unter Cygwin Probleme ! Keine Ahnung warum...
Ausserdem könnte es sein, daß der Ellenlange Konsolen-Log evtl. irgend-
welche Overflows erzeugt. Nur ne Vermutung, falls es jemanden interes-
siert !
Nokia(SAT), 2xIntel, Avia 500, GTX, BM1.0
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
mediom
- Erleuchteter
- Beiträge: 505
- Registriert: Freitag 20. Juli 2001, 00:00
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
so nun bin ich @ home.
hab gleich mal den bootmanager gestartet und wollte das yadd booten, aber das hat der bootmanger ausgegeben:
***Adapter Desc: VIA-kompatibler Fast Ethernet-Adapter - Paketplaner-Miniport (via IpHlpApi #1)
***MAC address: 00:A0:CC:CC:A9:E9 Local IP: 192.168.0.66
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:42:D4:ED (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 428 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\cygwin\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1320 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
1 - mountd: mount: path: C/cygwin/dbox2/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
und die box hat so ca 4,3mb an daten bekommen.
ist das yadd nun fertig oder nicht?
hat das mit dem compillern geklappt wenn das "touch .nano" als letztes nach "make all" dasteht?
hab gleich mal den bootmanager gestartet und wollte das yadd booten, aber das hat der bootmanger ausgegeben:
***Adapter Desc: VIA-kompatibler Fast Ethernet-Adapter - Paketplaner-Miniport (via IpHlpApi #1)
***MAC address: 00:A0:CC:CC:A9:E9 Local IP: 192.168.0.66
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:42:D4:ED (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 428 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\cygwin\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1320 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
1 - mountd: mount: path: C/cygwin/dbox2/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
und die box hat so ca 4,3mb an daten bekommen.
ist das yadd nun fertig oder nicht?
hat das mit dem compillern geklappt wenn das "touch .nano" als letztes nach "make all" dasteht?
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
mediom
- Erleuchteter
- Beiträge: 505
- Registriert: Freitag 20. Juli 2001, 00:00
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
hier das log:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-d1.f9.3c.07.00.00-bb
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.21
debug: Sending TFTP-request for file C/cygwin/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 219076
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 21 2002 - 23:03:03)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-42-d4-ed
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x83CDC (0x1E00 bytes)
FB logo at: 0x80832 (0x3482 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.21
Filename 'C/cygwin/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
#############################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 675372 Bytes = 659 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (Sandi@LUKA) (gcc version 3.1) #1 Sun Jul 21 23:06:37 2002
Boot arguments: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1:C/cy
gwin/dbox2/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1
:C/cygwin/dbox2/cdkroot/
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30448k available (1212k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20128kB/6709kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:42:d4:ed
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.21
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/2 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
init started: BusyBox v0.60.2 (2002.07.21-20:08+0000) multi-call Bad inittab en
try: ::restart:/sbin/init
modprobe: modprobe: Can't locate module tmpfs
mount: Mounting none on /tmp failed: No such device
Real Time Clock Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
mice: PS/2 mouse device common for all mice
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod dvb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod tuner failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_fb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_oss failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_napi failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_vbi failed
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Please press Enter to activate this console. /dev/dbox/rc0: No such file or dire
ctory
nach enter bin ich in der console.
warum will er die avia600?? hab nen 500er drin und der liegt auch bei den ucodes bei.
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-d1.f9.3c.07.00.00-bb
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.21
debug: Sending TFTP-request for file C/cygwin/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 219076
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 21 2002 - 23:03:03)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-42-d4-ed
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x83CDC (0x1E00 bytes)
FB logo at: 0x80832 (0x3482 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.21
Filename 'C/cygwin/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
#############################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 675372 Bytes = 659 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (Sandi@LUKA) (gcc version 3.1) #1 Sun Jul 21 23:06:37 2002
Boot arguments: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1:C/cy
gwin/dbox2/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1
:C/cygwin/dbox2/cdkroot/
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30448k available (1212k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20128kB/6709kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:42:d4:ed
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.21
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/2 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
init started: BusyBox v0.60.2 (2002.07.21-20:08+0000) multi-call Bad inittab en
try: ::restart:/sbin/init
modprobe: modprobe: Can't locate module tmpfs
mount: Mounting none on /tmp failed: No such device
Real Time Clock Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
mice: PS/2 mouse device common for all mice
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod dvb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod tuner failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_fb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_oss failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_napi failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.2/misc/avia.o: insmod /lib/modules/2.4.2/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.2/misc/avia.o: insmod avia_gt_vbi failed
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Please press Enter to activate this console. /dev/dbox/rc0: No such file or dire
ctory
nach enter bin ich in der console.
warum will er die avia600?? hab nen 500er drin und der liegt auch bei den ucodes bei.
-
mediom
- Erleuchteter
- Beiträge: 505
- Registriert: Freitag 20. Juli 2001, 00:00
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
hab da aufhänger:
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
dmxdev: set buffer size 40000 -> 60000
[FONT] FTC_Face_Requester (Micron/Regular)
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
dmxdev: set buffer size 40000 -> 60000
[nhttpd] Neutrino HTTP-Server starting..
/var/tuxbox/config/nhttpd.conf: No such file or directory
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.306 2002/07/19 21:47:58 waldi Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
/var/tuxbox/config/neutrino.conf: No such file or directory
/var/tuxbox/config/scan.conf: No such file or directory
[neutrino] error while loading scan-settings, using defaults!
dmxdev: set buffer size 40000 -> 60000
[neutrino] menue setup
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
saveing neutrino scan-config
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[CFrontend::getEvent] FE_COMPLETION_EV
[pmt.cpp] descriptor_tag (b): 07
[CCam::camdConnect] connect: No such file or directory
avia_gt_core: masking unhandled irq reg 1 bit 15
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
[CFrontend::getEvent] FE_COMPLETION_EV
[CFrontend::getEvent] FE_COMPLETION_EV
Oops: kernel access of bad area, sig: 11
NIP: C3AD5954 XER: E000A07F LR: C3AD5A7C SP: C1805D90 REGS: c1805ce0 TRAP: 0300
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000010, DSISR: 00000129
TASK = c1804000[249] 'zapit' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000002 C1805D90 C1804000 00000000 00000000 0000009E 00000000 00000000
GPR08: 00000000 00000000 C0243040 00000000 35353035 1004FF1C 01FE6A00 00000000
GPR16: FFFFFFFF 7FFFFD28 00000000 1006079C 00009032 01805E80 00000000 C0002718
GPR24: C0002440 100A3128 00000001 7FFFF9C0 C0004624 C3CDF000 C0004610 C3AED174
Call backtrace:
C3AD5A2C C3AD5BC8 C3AD5DC0 C3AD94A0 C3AD3100 C0033210 C0031AE0
C0031BA4 C000249C 0FF3A9A4 10003FAC 10007814 10005BD4 100062E4
0FC36970 00000000
zapitclient: connect: Connection refused
dmxdev: buffer overflow free: 70 len: 480
das: Oops: kernel access of bad area, sig: 11
kommt öfters.
ansonsten läuft es, es mag es aber nicht, wenn mann schnell umschaltet.
das: [CCam::camdConnect] connect: No such file or directory
kam als ich auf einen pw sender bin
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
dmxdev: set buffer size 40000 -> 60000
[FONT] FTC_Face_Requester (Micron/Regular)
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
dmxdev: set buffer size 40000 -> 60000
[nhttpd] Neutrino HTTP-Server starting..
/var/tuxbox/config/nhttpd.conf: No such file or directory
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.306 2002/07/19 21:47:58 waldi Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
/var/tuxbox/config/neutrino.conf: No such file or directory
/var/tuxbox/config/scan.conf: No such file or directory
[neutrino] error while loading scan-settings, using defaults!
dmxdev: set buffer size 40000 -> 60000
[neutrino] menue setup
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
saveing neutrino scan-config
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[CFrontend::getEvent] FE_COMPLETION_EV
[pmt.cpp] descriptor_tag (b): 07
[CCam::camdConnect] connect: No such file or directory
avia_gt_core: masking unhandled irq reg 1 bit 15
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
[CFrontend::getEvent] FE_COMPLETION_EV
[CFrontend::getEvent] FE_COMPLETION_EV
Oops: kernel access of bad area, sig: 11
NIP: C3AD5954 XER: E000A07F LR: C3AD5A7C SP: C1805D90 REGS: c1805ce0 TRAP: 0300
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000010, DSISR: 00000129
TASK = c1804000[249] 'zapit' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000002 C1805D90 C1804000 00000000 00000000 0000009E 00000000 00000000
GPR08: 00000000 00000000 C0243040 00000000 35353035 1004FF1C 01FE6A00 00000000
GPR16: FFFFFFFF 7FFFFD28 00000000 1006079C 00009032 01805E80 00000000 C0002718
GPR24: C0002440 100A3128 00000001 7FFFF9C0 C0004624 C3CDF000 C0004610 C3AED174
Call backtrace:
C3AD5A2C C3AD5BC8 C3AD5DC0 C3AD94A0 C3AD3100 C0033210 C0031AE0
C0031BA4 C000249C 0FF3A9A4 10003FAC 10007814 10005BD4 100062E4
0FC36970 00000000
zapitclient: connect: Connection refused
dmxdev: buffer overflow free: 70 len: 480
das: Oops: kernel access of bad area, sig: 11
kommt öfters.
ansonsten läuft es, es mag es aber nicht, wenn mann schnell umschaltet.
das: [CCam::camdConnect] connect: No such file or directory
kam als ich auf einen pw sender bin
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
mediom
- Erleuchteter
- Beiträge: 505
- Registriert: Freitag 20. Juli 2001, 00:00
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
ich hab nach anleitung (telefonmann) das cygwin installiert, einigen dateien (siehe posting vorher) verändert oder dazugetan.
hab dann das archive gesaugt
dann nur: make all
im dbox2 verzeichnis liegt nun alles zum booten
hab es dann mit dem BootManager versucht zu Booten,
durch die console hab ich gemerkt, das er das avia 500 und 600 will. hab es ihm gegeben und nun läuft es.
soll ich hier weiterposten, wie ich versuche ein yadd zu machen das ich als image flashen kann?
hab dann das archive gesaugt
dann nur: make all
im dbox2 verzeichnis liegt nun alles zum booten
hab es dann mit dem BootManager versucht zu Booten,
durch die console hab ich gemerkt, das er das avia 500 und 600 will. hab es ihm gegeben und nun läuft es.
soll ich hier weiterposten, wie ich versuche ein yadd zu machen das ich als image flashen kann?
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
-
vSaAmTp
- Einsteiger
- Beiträge: 232
- Registriert: Sonntag 17. März 2002, 22:14
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 428 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\cygwin\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1320 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
1 - mountd: mount: path: C/cygwin/dbox2/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
kommt oben im bootmanger, wieso kommt da: cannot send reply??
laufen tut es aber
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 428 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\cygwin\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\cygwin\dbox2\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1320 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.21 with MAC 00:50:9C:42:D4:ED
BootP> Answer sent!
1 - mountd: mount: path: C/cygwin/dbox2/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
kommt oben im bootmanger, wieso kommt da: cannot send reply??
laufen tut es aber
-
Reichi
- Erleuchteter
- Beiträge: 477
- Registriert: Sonntag 7. Oktober 2001, 00:00
-
mediom
- Erleuchteter
- Beiträge: 505
- Registriert: Freitag 20. Juli 2001, 00:00
vSaAmTp: oder jeder andre der ein aktuelles cygwin tuboxcdk hat könntest du mir mal bitte das makefile aus: ~/tuxbox-cvs/cdk/libsigc++-1.0.4 schicken an mediom@gmx.at bzw den ganzen ordner(sind gepackt unter 1 mb)
danke
danke