Neutrino auf der Dreambox

[PT-1]

wo haut man denn bei diesen Images die Cables.xml ?

Nicht in /var/tuxbox/config/ ???

[PT-1]

Hi,

lt. Riker ist der Fehler wohl zwar schon bekannt aber hier mal ein Log:

http://pt-1.net/Dreambox/pt1neutrinolog.txt

Code: Alles auswählen

[MPEG] VIDEO_STOP but state is STOP
[zapit] scan mode full
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument
[sectionsd] getUTC: read: Connection timed out
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument

[PT-1]

Antwort aus England...

zapit -d

Code: Alles auswählen

$Id: zapit.cpp,v 1.402 2007/07/22 14:36:42 dbluelle Exp $
[frontend] uncommitted_switch_mode 0
[frontend] cable box detected 
/var/tuxbox/config/zapit/services.xml: No such file or directory
zapit: set VIDEO_SET_FASTZAP 1
[zapit.cpp:parse_command:1201] cmd 17 (version 7) received
/var/tuxbox/config/zapit/services.xml: No such file or directory 
[zapit.cpp:parse_command:2044] cmd 17 processed
[zapit.cpp:parse_command:1201] cmd 19 (version 7) received
[zapit.cpp:parse_command:2044] cmd 19 processed
[zapit.cpp:parse_command:1201] cmd 18 (version 7) received 
[zapit.cpp:parse_command:2044] cmd 18 processed
[zapit.cpp:parse_command:1201] cmd 18 (version 7) received
[zapit.cpp:parse_command:2044] cmd 18 processed
[zapit.cpp:parse_command:1201] cmd 33 (version 7) received 
[zapit.cpp:parse_command:1612] set diseqc type 0
[zapit.cpp:parse_command:2044] cmd 33 processed
[zapit.cpp:parse_command:1201] cmd 34 (version 7) received
[zapit.cpp:parse_command:1621] set diseqc repeats to 0 
[zapit.cpp:parse_command:2044] cmd 34 processed
[zapit.cpp:parse_command:1201] cmd 35 (version 7) received
[zapit.cpp:parse_command:2044] cmd 35 processed
[zapit.cpp:parse_command:1201] cmd 31 (version 7) received 
[zapit.cpp:parse_command:1573] adding cable+ (diseqc 0)
[zapit.cpp:parse_command:2044] cmd 31 processed
[zapit.cpp:parse_command:1201] cmd 79 (version 7) received
[zapit.cpp:parse_command:2044] cmd 79 processed 
[zapit.cpp:parse_command:1201] cmd 27 (version 7) received
complete_filename: /share/tuxbox/cables.xml
[zapit.cpp:parse_command:2044] cmd 27 processed
[zapit] scan mode full
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument 
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument 
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument 
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument 
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument
[frontend.cpp:getEvent:294] [CFrontend::getEvent] timeout: Invalid argument
[frontend.cpp:setFrontend:226] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid argument 

strange as there is a service.xml there also it keeps trying to use the cables.xml in /share/tuxbox/ and not the one u place in /var/tuxbox/config

heres alittle more from console

Code: Alles auswählen

Linux/PPC load: console=null root=/dev/mtdblock5 rootfstype=squashfs ro console=ttyS0,115200 
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.6.9 (seife@strolchi) (gcc version 3.4.4) #1 Thu Aug 30 22:34:45 CEST 2007
Built 1 zonelists
Kernel command line: console=null root=/dev/mtdblock5 rootfstype=squashfs ro console=ttyS0,115200 
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
Memory: 30080k available (1704k kernel code, 580k data, 80k init, 0k highmem)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher 
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
ttyS2 at MMIO 0x0 (irq = 22) is a 16550A
loop: loaded (max 8 devices)
ne.c:v1.10 9/23/94 Donald Becker ( becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0xc3060600:<4>eth0: interrupt from stopped card
 00 09 34 1f 95 f2
eth0: NE2000 found at 0xc3060600, using IRQ 25. 
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Using deadline io scheduler
dreambox: flash mapping: 800000 at 7f800000
DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031 
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
disable flash VPP
Creating 7 MTD partitions on "DreamBOX rev3+":
0x00000000-0x00600000 : "DreamBOX cramfs+squashfs" 
0x00600000-0x007c0000 : "DreamBOX jffs2"
0x007c0000-0x00800000 : "DreamBOX OpenBIOS"
0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"
0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" 
0x00120000-0x00600000 : "DreamBOX SquashedFS"
0x00000000-0x00120000 : "DreamBOX Cramfs"
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
IBM IIC driver v2.1
ibm-iic0: using standard (100 kHz) mode 
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17 
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k init
init started:  BusyBox v1.2.1 (2007.09.01-10:15+0000) multi-call binary
head: module license 'Proprietary' taints kernel. 
framebuffer mem base: a0900000
0/0: 00004000 81f00000
0/1: 00000000 00000000
1/0: 20003000 80f00000
1/1: 00000000 00000000
trying to memset ..
ok.
fb_find_mode returned 0
allocated major 250 for denc. 
[DENC] set PAL
[DENC] disable WSS
core: Loaded IBM STB02xx core driver
audio init
AUDIO_CLEAR_BUFFER
demux: init
xp0_clk_stop
stb04_pig: $Id: stb04_pig.c,v 1.15 2007/02/28 21:34:47 ghost Exp $
registering frontend...
tda: init complete
[DENC] set mode to FBAS
showlogo is /bin/showlogo
returning 1[DENC] set mode to FBAS

setting color format 1
VIDEO_SELECT_SOURCE
open video clip-mode
VIDEO_CLEAR_BUFFER 
VIDEO_PLAY / VIDEO_CONTINUE, state 1 0
write 1 event's ...
VIDEO_STOP, state 0
showlogo is a tracked alias for /bin/showlogo
udhcpc (v1.2.1) started
udhcpc[38]: udhcpc (v1.2.1) started
Sending discover... 
udhcpc[38]: Sending discover...
Sending select for 192.168.1.2...
udhcpc[38]: Sending select for 192.168.1.2...
Lease of 192.168.1.2 obtained, lease time 259200
udhcpc[38]: Lease of 192.168.1.2 obtained, lease time 259200

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.247 2007/08/08 22:17:06 dbt Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory 
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.402 2007/07/22 14:36:42 dbluelle Exp $
[frontend] uncommitted_switch_mode 0
[frontend] cable box detected
/var/tuxbox/config/zapit/services.xml: No such file or directory 
zapit: set VIDEO_SET_FASTZAP 1
$Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

[controld] Boxtype detected: (4)
set event: 00000001
[controld] WARNING! Aspect is 1,[DENC] set WSS 4:3
 should be > 1! 
[controld] setting VideoFormat to 2
[controld] format: 2
cont[DENC] set mode to RGB
rold: audioContr[DENC] set mode to FBAS
ol::setVolume do[DENC] set WSS 4:3
es not work on dreamboxes
controld: audioControl::setMute does not work on dreamboxes 
[controld]: Could not open configuration file scart.conf, using defaults
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
[controld] AVSIOSASW1: Invalid argument
[controld] AVSIOSVSW2: Invalid argument 
[controld] AVSIOSASW2: Invalid argument
[controld] AVSIOSVSW3: Invalid argument
[controld] setting VideoFormat to 2
[controld] format: 2
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
LCD (/dev/dbox/lcd0): No such file or directory 
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) 
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
[controld] aspec[DENC] set WSS 4:3
t ratio changed 0 -> 1 (4:3 -> 16:9)
[controld] setting VideoFormat to 2
[controld] format: 2
[neutrino] frameBuffer Instance created
2044k video mem
[neutrino] Software update enabled
LCD (/dev/dbox/lcd0): No such file or directory
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default... 
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) 
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[lcdd] exit...(no lcd-support)
[lcdd] LCD-Init failed!
[neutrino] menue setup
loading locales: scandir: No such file or directory 
complete_filename: /share/tuxbox/cables.xml
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[sectionsd] getUTC: read: Connection timed out 
[neutrino] initialized everything
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
login[75]: root login  on `pts/0' 

[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out

[seife]

if the services.xml has transponders with

Code: Alles auswählen

fec_inner="5"

then change them to

Code: Alles auswählen

fec_inner="4"

.
At least that's the difference of the services.xml between my dboxen and the dm500. And i seem to remember, that that's one of the FIXMEs that i had put in the code... :-)

[OSBORNE82]

if the services.xml has transponders with

Code: Alles auswählen

fec_inner="5"

then change them to

Code: Alles auswählen

fec_inner="4"

.
At least that's the difference of the services.xml between my dboxen and the dm500. And i seem to remember, that that's one of the FIXMEs that i had put in the code...

ive just checked the service.xml and it does indeed contain fec_inner="4"
so not sure

cheers

osborne82

[PT-1]

The one included within the Image or the one you copied over ?

[OSBORNE82]

The one included within the Image or the one you copied over ?

sorry should have said yes the one i copied over (taken from rudbox neutrino image) couldnt get it to scan 100% with the cables.xml inlcuded and wouldnt use any new cables.xml ftp across

cheers

osborne82

[seife]

for cables.xml it is different. Replace

Code: Alles auswählen

modulation="6"

with

Code: Alles auswählen

modulation="3"

At least that is, what enigma apparently is doing. Maybe in API V1 QAM_64 is equal to QAM_AUTO (== 6) which does not exist in V1.

[seife]

btw: from reading the code, it should use a cables.xml put into /var/tuxbox/config/zapit/cables.xml, so if it does not work, please put sime printf()s in the code to find out why it fails.

From now on, please compile your own image for debugging, and put some debugging into it. I won't debug the cable issues like this.

[OSBORNE82]

From now on, please compile your own image for debugging, and put some debugging into it. I won't debug the cable issues like this.

thanks for your time i will compile and insert debugging to see the problem

cheers

osborne82

[seife]

Thanks. I will of course try to help, but having to build testimages is actually hard :-)
Use my patch, it is on the http://ulc.tuxbox-cvs.sourceforge.net/ upload-center, this thread contains a "howto build seife's Patch"- explanation a few posts back, and then i'd start inserting printf's in zapit.cpp near my "complete_filename"-printf, to find out why it does not find cables.xml inside /var/tuxbox...

something like (untested):

Code: Alles auswählen

        complete_filename = (std::string)ZAPITCONFIGDIR + "/" + filename;
        if ((stat(complete_filename.c_str(), &buf) == -1) && (errno == ENOENT)) {
printf("file %s does not exist\n", complete_filename.c_str());
                complete_filename = (std::string)DATADIR + "/" + filename;
        }
printf("complete_filename: %s\n", complete_filename.c_str());
        scanInputParser = parseXmlFile(complete_filename.c_str());

and then start debugging from there. Once it finds your cables.xml, edit it to contain "3" instead of "6" for modulation. Maybe this is already enough.
_IF_ it is, we can simply map "6" to "3", like enigma seems to do.

Good luck :-)

[ZERINA]

@seife und aller anderen.

Danke für eure Arbeit, endlich kann ich mir Dreambox zulegen, Enigma ist leider nicht mein Fall (Bitte nicht als Angriff verstehen).

Gibt es auch Anstrengungen Dualtuner support für Neutrino zu realisieren ?

[seife]

Also von meiner Seite nicht.
Obwohl - vielleicht kaufe ich mir ja doch mal nen relook 400 ;-)
Aber das halte ich für eher unwahrscheinlich.

[seife]

So, für die Kabeluser, probiert doch mal das folgende, zusätzlich zu meinem vorigen diff:

Code: Alles auswählen

Index: src/zapit.cpp
===================================================================
RCS file: /cvs/tuxbox/apps/dvb/zapit/src/zapit.cpp,v
retrieving revision 1.402
diff -u -p -r1.402 zapit.cpp
--- a/src/zapit.cpp     22 Jul 2007 14:36:42 -0000      1.402
+++ b/src/zapit.cpp     20 Sep 2007 16:58:25 -0000
@@ -322,7 +322,7 @@ void write_transponder_node(FILE * tmp,
                (fe_spectral_inversion_t) xmlGetNumericAttribute(transponder, "inversion", 0),
                (uint32_t) xmlGetNumericAttribute(transponder, "symbol_rate", 0),
                (fe_code_rate_t) xmlGetNumericAttribute(transponder, "fec_inner", 0),
-               (fe_modulation_t) xmlGetNumericAttribute(transponder, "modulation", 0));
+               CFrontend::getModulation(xmlGetNumericAttribute(transponder, "modulation", 0)));
     }
 }
Index: src/scan.cpp
===================================================================
RCS file: /cvs/tuxbox/apps/dvb/zapit/src/scan.cpp,v
retrieving revision 1.156
diff -u -p -r1.156 scan.cpp
--- a/src/scan.cpp      24 Jun 2007 11:46:03 -0000      1.156
+++ b/src/scan.cpp      20 Sep 2007 16:59:26 -0000
@@ -533,7 +533,7 @@ int scan_transponder(xmlNodePtr transpon
    {
        feparams.u.qam.symbol_rate = xmlGetNumericAttribute(transponder, "symbol_rate", 0);
        feparams.u.qam.fec_inner = (fe_code_rate_t) xmlGetNumericAttribute(transponder, "fec_inner", 0);
-       feparams.u.qam.modulation = (fe_modulation_t) xmlGetNumericAttribute(transponder, "modulation", 0);
+       feparams.u.qam.modulation = CFrontend::getModulation(xmlGetNumericAttribute(transponder, "modulation", 0));
         diseqc_pos = 0;
    }
Index: src/zapost/frontend.cpp
===================================================================
RCS file: /cvs/tuxbox/apps/dvb/zapit/src/zapost/frontend.cpp,v
retrieving revision 1.58
diff -u -p -r1.58 frontend.cpp
--- a/src/zapost/frontend.cpp   8 Jul 2007 15:47:44 -0000       1.58
+++ b/src/zapost/frontend.cpp   20 Sep 2007 17:01:21 -0000
@@ -120,11 +135,10 @@ fe_modulation_t CFrontend::getModulation
        case 0x05:
                return QAM_256;
        default:
-#if HAVE_DVB_API_VERSION < 3
-               // FIXME!
-               return QAM_256;
-#else
+#if HAVE_DVB_API_VERSION >= 3
                return QAM_AUTO;
+#else
+               return QAM_64;
 #endif
        }
 }

Ich habe mal ein Image damit gebaut und lade es gerade auf http://ulc.tuxbox-cvs.sourceforge.net hoch, aber Achtung: das ist ungetestet, ich habe es nicht mal probegeflashed, da ich gerade im Zug sitze und die Box nicht dabeihabe :-)
Also, Kabelkunden: probiert es aus, wenn es immer noch nicht funktioniert, dann müßt ihr den Mist selbst fixen, eine echte Idee, woran es liegen könnte, habe ich dann auch nicht mehr :-)

Edit: Link neutrino-dm500-seife-20070920.mtd0.img

[WoRm]

@dbluelle

hi

gibt es schon was neues wegen automount?


gruss

[seife]

hä? Automount ist bei meinen Images mit drin. Zumindest sollte er das sein. Wenn der nicht funktioniert, mach vielleicht besser einen eigenen thread auf, damit es hier nicht verloren geht.

Edit: ups, die Frage war ja an dbluelle gerichtet. Sorry :-)

[JtG-Riker]

@Seife

Kabel geht leider noch kein scan , habs eben mal getestet.

Gruß Riker

[prodigy7]

Wollte eben das Image ausprobieren, aber das kann ich mir dann wohl ersparen ...

[seife]

ok, in diesem Fall muß nun jemand ran, der das mit ein paar gezielten printf()s debuggen kann. Meine Kristallkugel ist inzwischen total eingetrübt :-)

[PT-1]

Ich warte ja noch auf Osbourne82 ...Keine Ahnung ob er das hinbekommt..

@Prodigy,

hast du mit modulation 3 in cables.xml getestet wie von Seife vorgeschlagen ?

[prodigy7]

Ne - bin davon ausgegangen, dass das Riker getan hat - soll ich nochmal testen?

@Riker: Hast du das gemacht?

[JtG-Riker]

Ne - bin davon ausgegangen, dass das Riker getan hat - soll ich nochmal testen?

@Riker: Hast du das gemacht?

Hm ich hab nur das Image eingespielt und gescannt, sonst nix

[prodigy7]

Okay - dann werde ich die Tage doch nochmal testen. Wenn du schneller bist Riker, gib bescheid

[prodigy7]

Neues zum Thema Neutrino@DM-500C:

Ich hab das aktuellste Image von Seife getestet, wo die Modulation schon auf 3 gesetzt war - leider auch ohne Erfolg. Ich denke aber, das ich über das Bootlog noch Infos habe, die interessant sein könnten. Ich habe die funktionierende Konfiguration von einer DBox genommen (Modulation stand schon auf 3) und folgendes kam raus, nachdem die Box mit entsprechender cables.xml gebootet war:

Code: Alles auswählen

<4>Linux version 2.6.9 (seife@strolchi) (gcc version 3.4.4) #1 Thu Aug 30 22:34:45 CEST 2007
<7>On node 0 totalpages: 8192
<7>  DMA zone: 8192 pages, LIFO batch:2
<7>  Normal zone: 0 pages, LIFO batch:1
<7>  HighMem zone: 0 pages, LIFO batch:1
<4>Built 1 zonelists
<4>Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs ro
<4>PID hash table entries: 256 (order: 8, 4096 bytes)
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Memory: 30080k available (1704k kernel code, 580k data, 80k init, 0k highmem)
<7>Calibrating delay loop... 250.36 BogoMIPS (lpj=125184)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 16
<6>Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
<6>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled
<4>ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
<4>ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
<4>ttyS2 at MMIO 0x0 (irq = 22) is a 16550A
<6>loop: loaded (max 8 devices)
<6>ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
<6>Last modified Nov 1, 2000 by Paul Gortmaker
<6>NE*000 ethercard probe at 0xc3060600:<4>eth0: interrupt from stopped card
<4> 00 09 34 3b ed e5
<4>eth0: NE2000 found at 0xc3060600, using IRQ 25.
<6>Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
<4>Using deadline io scheduler
<5>dreambox: flash mapping: 800000 at 7f800000
<6>DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Intel/Sharp Extended Query Table at 0x0031
<6>Using buffer write method
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x20000,blocks=64
<4>disable flash VPP
<5>Creating 7 MTD partitions on "DreamBOX rev3+":
<5>0x00000000-0x00600000 : "DreamBOX cramfs+squashfs"
<5>0x00600000-0x007c0000 : "DreamBOX jffs2"
<5>0x007c0000-0x00800000 : "DreamBOX OpenBIOS"
<5>0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"
<5>0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"
<5>0x00120000-0x00600000 : "DreamBOX SquashedFS"
<5>0x00000000-0x00120000 : "DreamBOX Cramfs"
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>IBM IIC driver v2.1
<6>ibm-iic0: using standard (100 kHz) mode
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<4>Freeing unused kernel memory: 80k init
<4>head: module license 'Proprietary' taints kernel.
<4>framebuffer mem base: a0900000
<4>0/0: 00004000 81f00000
<4>0/1: 00000000 00000000
<4>1/0: 20003000 80f00000
<4>1/1: 00000000 00000000
<4>trying to memset ..
<4>ok.
<4>fb_find_mode returned 0
<4>allocated major 250 for denc.
<4>[DENC] set PAL
<4>[DENC] disable WSS
<5>core: Loaded IBM STB02xx core driver
<4>audio init
<4>AUDIO_CLEAR_BUFFER
<4>demux: init
<4>xp0_clk_stop
<4>stb04_pig: $Id: stb04_pig.c,v 1.15 2007/02/28 21:34:47 ghost Exp $
<4>registering frontend...
<6>tda: init complete
<4>[DENC] set mode to FBAS
<4>[DENC] set mode to FBAS
<4>VIDEO_SELECT_SOURCE
<4>open video clip-mode
<4>VIDEO_CLEAR_BUFFER
<4>VIDEO_PLAY / VIDEO_CONTINUE, state 1 0
<4>write 1 event's ...
<4>VIDEO_STOP, state 0
<4>set event: 00000001
<4>[DENC] set WSS 4:3
<4>[DENC] set mode to RGB
<4>[DENC] set mode to FBAS
<4>[DENC] set WSS 4:3
<4>[DENC] set WSS 4:3
<4>[MPEG] VIDEO_STOP but state is STOP
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout

Nachdem ich eine Kanalsuche gemacht habe, kam noch folgendes hinzu:

Code: Alles auswählen

<4>[MPEG] VIDEO_STOP but state is STOP
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<3>tda10023: div is too large!
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<3>tda10023: div is too large!
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<3>tda10023: div is too large!
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<3>tda10023: div is too large!
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>[MPEG] VIDEO_STOP but state is STOP
<3>tda10023: div is too large!
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>waiting for lock
<4>lock timeout

Hilft euch das?

p7

[seife]

Nicht wirklich :-)
Irgendwas machen wir noch falsch. Nun müßte man sich entweder mal mit printf()s durch den code kämpfen und schauen, was schief geht. Wenn man die verdächtige Stelle gefunden hat, muß man halt mal ganz genau vergleichen, was Enigma in derselben Situation macht. Oder man vergleicht halt komplett was Enigma und mein Patch hier unterschiedlich machen. Ich werde das aber nicht tun ;-)