Channel Scan endet bei 92% und die Box schaltet ab
Verfasst: Donnerstag 27. Februar 2003, 21:28
Hilfe...
Ich habe das alexW Image 1.6.8 mit cramfs vom 18.02.03 drauf. Wenn ich nun LCARS starte kommt der Channel Scan, läuft bis 92% und dann schaltet sich die Box aus.
Woran kann denn das bitte liegen ? Ich habe das Image mehrmals geflashed. Immer das gleiche.
Hier mal das Ende vom Log:
... Tuner-Lock Status: 123
... S/N: 64077 SigStrength: 12593
Frequ: 4420 ifreq: 442000 Pol: -1 FEC: -1 Sym: 6900 dis: 1 (param: 0x00)
... Tuner-Lock Status: 123
... S/N: 64428 SigStrength: 22616
OPEN FRONTEND DEVICE: Device or resource busy
CXA2126 found
Unmounting 'ramfs' on '/tmp'
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
System halt
Wäre froh, wenn da jemadn helfen könnte.
habjetztLinux
Ich habe das alexW Image 1.6.8 mit cramfs vom 18.02.03 drauf. Wenn ich nun LCARS starte kommt der Channel Scan, läuft bis 92% und dann schaltet sich die Box aus.
Woran kann denn das bitte liegen ? Ich habe das Image mehrmals geflashed. Immer das gleiche.
Hier mal das Ende vom Log:
... Tuner-Lock Status: 123
... S/N: 64077 SigStrength: 12593
Frequ: 4420 ifreq: 442000 Pol: -1 FEC: -1 Sym: 6900 dis: 1 (param: 0x00)
... Tuner-Lock Status: 123
... S/N: 64428 SigStrength: 22616
OPEN FRONTEND DEVICE: Device or resource busy
CXA2126 found
Unmounting 'ramfs' on '/tmp'
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
System halt
Wäre froh, wenn da jemadn helfen könnte.
habjetztLinux