Nokia D-Box2 mit 2xIntel und BN 1.0

Diskussionen um Bootloader, Kernel, Busybox
Antworten
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Nokia D-Box2 mit 2xIntel und BN 1.0

Beitrag von Kdschmie »

Hallo, ich habe von einem Bekannten eine Box mit der Originalsoftware bekommen und wollte diese mit Linux bespielen. Doch beim Einschalten der Box stand im Display "Beta Research" und darunter sind 5 Balken zu sehen, als wenn der Schreibschutz schon deaktiviert ist. Ich habe die Box eine halbe Stunde am Netz gelassen, doch die Balken haben sich nicht verändert, sie gehen ganz kurz weg und kommen wieder. Wenn ich die Starttaste und Pfeil nach oben drücke erscheint die Zahlenfolge auf dem Display und ohne, das ich etwas gemacht habe, die 5 Balken.

Kennt jemand das Problem und kann mir helfen??????
wolgade
Semiprofi
Semiprofi
Beiträge: 1313
Registriert: Donnerstag 2. Dezember 2004, 00:18
Kontaktdaten:

Beitrag von wolgade »

Schließ das Ding doch mal an die Glotze an und sag uns, was da angezeigt wird!

Der Start von Betanova kann durchaus eine Weile dauern. Ich hab da seinerzeit mal die ersten 20 Minuten eines Filmes verpaßt, obwohl ich die Box fünf Minuten vor Filmbeginn gestartet hatte.

Achso, das Antennenkabel würde ich auch anschließen.
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

Habe die Box angeschlossen, aber es tut sich nichts (Antennen- und Scartkabel
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

nur das normale Fernsehbild, doch ohne Ton
wolgade
Semiprofi
Semiprofi
Beiträge: 1313
Registriert: Donnerstag 2. Dezember 2004, 00:18
Kontaktdaten:

Beitrag von wolgade »

Kdschmie hat geschrieben:nur das normale Fernsehbild, doch ohne Ton
Die Box startet also mit Betanova und gibt auch ein Bild aus. Habe ich das richtig verstanden?

Dann ist vielleicht an der Box die Lautstärke runtergeregelt.
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

nein, auf den AV-Kanal habe ich nur das normale Fernsehbild nur kein Ton. Schalte ich dann auf einen normalen Kanal um ist auch der Ton wieder da. Das Display zeigt immernoch die 5 Balken an, die ausgehen und wiederkommen.
wolgade
Semiprofi
Semiprofi
Beiträge: 1313
Registriert: Donnerstag 2. Dezember 2004, 00:18
Kontaktdaten:

Beitrag von wolgade »

Also das Fernsehbild, das von der Glotze empfangen wird und nicht von der D-Box.

Dann ist da wohl was kaputt. Da muß dir jetzt jemand anderes weiterhelfen.
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

Ich danke Dir erstmal
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

mit sicherheit was kaputt... da der BMon aber noch ziemlich weit bzw. vielleicht sogar ganz durchläuft kanns sooooo schlimm nicht sein. Reparieren lassen :wink:
äääähm.... die Zahlenreihe... poste die mal bitte
never change a running system
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

hier die Zahlenreihe:017A0081 1600

die letzte Zahl kann ich leider nicht lesen
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

hier die Zahlenreihe:017A0081 1600
höhö... stöpsel mal die Speichererweiterung wieder rein, dann geht das auch :D
never change a running system
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

die Seichererweiterung ist drin, aber gleicher Zustand wie vorher.
Ich habe jetzt die Box an meinen Rechner gehängt. Im Boot-Manager
sieht so aus:

***Adapter Desc: Realtek RTL8139/810x Family Fast Ethernet NIC (via IpHlpApi #0)
***MAC address: 00:02:2A:E1:EA:72 Local IP: 192.168.1.102
***BootP server started... Port 67
***TFTP server started... Port 69

Im Com-Terminal kann ich auch nichts eingeben.
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

denn is die Speichererweiterung kaputt
never change a running system
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

vorerst einmal vielen Dank.
Kann es auch sein, dass man versucht hat die Box ohne den Speicher in den Debug zu bringen?

Die Nummer im Display hat sich auch verändert. Hatte nach dem a die 1 vergessen.
Neue Nummer: 017a10081 16160?
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

die speichererweiterung zeigt sich in "161608"
--->16MB onboard, 16 MB Erweiterung, 8MB flash
und da stand vorhin 1600xx---> hätte dementsprechend Erweiterung gefehlt bzw. kaputt
never change a running system
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

also ist der Speicher defekt.
Hat nichts mit dem Debug-Versuch ohne Speicher zu tun.

Wo bekommt man einen Speicher?

Gruß und vielen Dank
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

schwierig... umbau auf 32MB onboard ist da fast billiger... ansonsten:
gurgel.... hallenberg.com
Michael... irata.de
Bastian... dbox2.net
never change a running system
Kdschmie
Neugieriger
Neugieriger
Beiträge: 14
Registriert: Donnerstag 16. August 2007, 13:33

Beitrag von Kdschmie »

Super Danke
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Beitrag von tik-tak »

Hallo,

also habe ich jetzt Dbox2 Nokia von "Kdschmie" auf dem Tisch.

Gleich aufgefallen, CPU wurde schon mal ausgetauscht !!!

Der Dbox2 war noch mit Original Betanova, wenn er Strom krieg waren wie oben beschrieben, nur 5 Balken mit Betanova Logo und immer wieder 5 Balken. War so als ob er immer wieder neue startete.
In dem Zustand war nicht möglich in Debug- Modus den versetzen, keine verbindung zu Box.

Habe ich dann:

1. Flash 2xIntel rausgelötet, ausgelesen und mit neue mit Bootloader schon in Debug beschrieben. Wieder eingelötet. Und der Dbox2 hat gestartet. Also Dbox2 geht wieder, Flashen klappt zu 100%, Arbeutsspeicher Test ist auch ok.

Problem: Wenn Dbox2 schon fast hochgefahren hat, fährt wieder runter :(

Habe folgende Teile umgetauscht:

1. SEC Chip und seine RAMs - Ergebniss: die waren ok
2. AVIA500 - Ergebniss: war auch ok

Arbeitspeicher intern oder externe Erweiterung denke mir mal nicht, sonst Dbox2 hätte gleich gemekkert oder ? AVIA GTX auch nicht ? Frontprozessor ?

Hier ist Bootlog:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xxxxxxxxxxxxxxxxxxxxxxxxx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 162920
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Mar 17 2007 - 16:51:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 698384 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 698320 Bytes = 682 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (ImageTeam@yadi.org) (gcc version 3.4.4) #2 Sa 17. Mr
17:21:55 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30772k available (1188k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:58:ab
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.03.17-16:04+0000) multi-call event: $Id: eve
nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Thu Jan 1 01:00:00 CET 1970
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia50
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: chkIVersion.cpp,v 1.15 2006/07/30 21:23:29 mogway Exp $
Yadi Release vom 17.03.2007 16:00 - Image-Version 2.2.0.0
Networkcfg eth0: / gw ns
Startmode: Bootmenu - HWS: on
$Id: lcdip.cpp,v 1.5 2005/04/11 22:17:30 mogway Exp $
ifup: /etc/network/interfaces: No such file or directory

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.236 2007/02/
25 20:51:52 guenther Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[sectionsd] /var/tuxbox/config/neutrino.conf not found
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[camd] CA_SEND_MSG: No such device
[camd] CA_SEND_MSG: No such device
$Id: zapit.cpp,v 1.394 2007/03/12 02:51:08 Arzka Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
/var/tuxbox/config/zapit/services.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 favia_av: new_a
udio_config timeout
blk=1
avia_av: new_audio_config timeout
[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/scan.conf for reading.
[neutrino] Loading of scan settings failed. Using defaults.
cannot read locale: No such file or directory
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...Segmentation fault
zapit shot down :)
Waiting for controld (max. 16 seconds)
Waiting for controld (max. 15 seconds)
Waiting for controld (max. 14 seconds)
Waiting for controld (max. 13 seconds)
Waiting for controld (max. 12 seconds)
Waiting for controld (max. 11 seconds)
Waiting for controld (max. 10 seconds)
Waiting for controld (max. 9 seconds)
Waiting for controld (max. 8 seconds)
Waiting for controld (max. 7 seconds)
Waiting for controld (max. 6 seconds)
Waiting for controld (max. 5 seconds)
Waiting for controld (max. 4 seconds)
Waiting for controld (max. 3 seconds)
[sectionsd] getUTC: read: Connection timed out
Waiting for controld (max. 2 seconds)
Waiting for controld (max. 1 seconds)
Segmentation fault
CXA2092 found
The system is going down NOW !!
Sending SIGTERM to all processe[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes.
Requesting system halt.
Zuletzt geändert von tik-tak am Montag 20. August 2007, 22:51, insgesamt 1-mal geändert.
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Beitrag von tik-tak »

Frage zu Yadi Release vom 17.03.2007 Image.

Wenn ich diese Image geflasht habe, dann neue starte, ohne Ucodes und Alpha, immer auf ok drücke, ist dann normal dass Dbox2 wieder runterfahrt ?

Danke

Bei Dbox2 wurde schon mal CPU umgetauscht, kann sein, dass er aber defekt ist oder ?

Werde als nächstes umbauen auf 32 Mb, dann weiter qucken
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Beitrag von seife »

tik-tak hat geschrieben:Hallo,

Problem: Wenn Dbox2 schon fast hochgefahren hat, fährt wieder runter :

...

Hier ist Bootlog:

[neutrino] Software update enabled
[neutrino] enable flash
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/scan.conf for reading.
[neutrino] Loading of scan settings failed. Using defaults.
cannot read locale: No such file or directory
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...Segmentation fault
Hier segfaulted neutrino, drum fährt die Kiste wieder runter.
Der segfault kann verschiedene Ursachen haben, unter anderem:
- Programmfehler / Programmierfehler im Flash -> neu flashen mit anderem image
- RAM defekt

Du solltest auf der seriellen Konsole erstmal während des bootens, während Neutrino noch startet Enter drücken können und dann ganz schnell "killall start_neutrino" oder "touch /tmp/.nohalt"eingeben. Dann fährt sie zumindest nicht gleich wieder runter und du kannst das Problem untersuchen.
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Beitrag von tik-tak »

Danke :)

1. Programmfehler / Programmierfehler im Flash -> neu flashen mit anderem image

Schliesse ich aus , habe mehrmals neue geflasht und flashvorgang zu 100% in Ordnung, wie gewöhnlich .

2 . Ich tendiere zu Hardware-Problem, zB RAM, werde demnächst umbauen auf 32 MB und wenn Problemm sich wiederholt wie oben beschrieben vorgehen.

Ergebniss poste dann hier :)
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Beitrag von tik-tak »

Dbox2 Nokia ist wieder gesund und hat 32 MB auf dem Board :)
Erst mal aber probelaufen angesagt




debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID xxxxxxxxxxxxxxxxxxxxxxxxxx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 162920
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Mar 17 2007 - 16:51:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 698384 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 698320 Bytes = 682 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (ImageTeam@yadi.org) (gcc version 3.4.4) #2 Sa 17. Mr
17:21:55 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30772k available (1188k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:58:ab
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.03.17-16:04+0000) multi-call event: $Id: eve
nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Thu Jan 1 01:00:00 CET 1970
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia50
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: chkIVersion.cpp,v 1.15 2006/07/30 21:23:29 mogway Exp $
Yadi Release vom 17.03.2007 16:00 - Image-Version 2.2.0.0
Networkcfg eth0: 192.168.0.23/255.255.255.0 gw 192.168.0.1 ns 192.168.0.1
Startmode: Bootmenu - HWS: on

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.236 2007/02/
25 20:51:52 guenther Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[camd] CA_SEND_MSG: No such device
[camd] CA_SEND_MSG: No such device
$Id: zapit.cpp,v 1.394 2007/03/12 02:51:08 Arzka Exp $
/var/tuxbox/config/zapit/services.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
avia_av: new_audio_config timeout
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
avia_av: new_audio_config timeout
[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
suncat2007
Einsteiger
Einsteiger
Beiträge: 157
Registriert: Donnerstag 10. Mai 2007, 19:11

Beitrag von suncat2007 »

hallo,
ich hatte fast das gleiche Problem.
Nokia 2xi mit bmon 1.0 und Speichererweiterung.
Sobald ich den Bootvorgang angehalten habe, konnte ich etwas ins Comterminal schreiben.
Als das ppc gestartet wurde, dann bootete sie weiter hoch mit betanova.
Flash ausgelötet und neubeschrieben.

Der Debug war jetzt da,aber ich konnte sie nicht mit einem Images flashen :-(

Mit hallenberger gings dann, alles hat dann gefunkt. :-)

Vor 2 Monate hatte ich eine sagem Box, images geflasht, hochgefahren, sie hing dann beim Kernel,

Mit hallenberger gings dann, alles hat dann gefunkt. :-)

Ansonsten hats 1000 mal geklappt mit dem Bootmanager.
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Beitrag von tik-tak »

[camd] CA_SEND_MSG: No such device
[camd] CA_SEND_MSG: No such device


Das aber noch schnell gemessen und behoben. (War nicht gut, wenn so eine Meldung kommt)

Seit paar Stunden geht Dbox2 wie neue :)
Antworten