Nokia Sat bleibt bei LOADING KERNEL hängen

Wie blitze ich ein Bild - Permanent Outgoing Incomes
norum2000
Beiträge: 1
Registriert: Dienstag 5. Februar 2008, 21:15

Nokia Sat bleibt bei LOADING KERNEL hängen

Beitrag von norum2000 »

Hallo!

Mein Name ist Thomas und bin ganz nue hier.
Vielleicht kann kir ja wer bei meinem Problem helfen.
Habe eine Nokia Sat 2x Intel die nicht mehr Hochfährt.
Sie bleibt immer bei Loading kernel stehen.
Egal welches Image ich auch draufflashe.
Hab keine ahnung mehr was ich machen kann.
Kann es sein das der Flashspeicher defekt ist.
Hab jetzt das STB-Image Ver.3.0 gerade versucht zu flashen.
Poste hier meinen Start Log:


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-1c.43.1d.07.00.00-63
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x7ffd, size= 16260
verify sig: 262
Branching to 0x3fff


U-Boot 1.2.0 (Tuxbox) (Mar 22 2007 - 21:20:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0xfffew
### FS load complete: 6683s8 bytes loaded to 0xfffew
............................................................... done
Un-Protected 63 sectors
## Booting image at 000fffew ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 6682i4 Bytes = 653.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (sb@Build) (gcc version 3.4.4) #1 Do Mr 22 21:22:28 C
ET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 23856 1<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SW
P: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 2958k available (1144k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:90:33
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x7FFDG mem->0xFFFAWu)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x0001fffg : "BR bootloader"
0x0001fffg-0x0003fffg : "FLFS (U-Boot)"
0x0003fffg-0x0047fffg : "root (squashfs)"
0x0047fffg-0x007ffdg : "var (jffs2)"
0x0001fffg-0x007ffdg : "Flash without bootloader"
0x00000000-0x007ffdg : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init


Würde mich über Eure Hilfe sehr freuen.
wolgade
Semiprofi
Semiprofi
Beiträge: 1313
Registriert: Donnerstag 2. Dezember 2004, 00:18

Re: Nokia Sat bleibt bei LOADING KERNEL hängen

Beitrag von wolgade »

Hab jetzt das STB-Image Ver.3.0 gerade versucht zu flashen.
Das ist schlecht. Damit gibt es hier nämlich keinen Support. Guckst du hier: http://tuxbox-forum.dreambox-fan.de/for ... 23&t=46283

Flash ein legales Image, dann kann man dir helfen.