Einschalten über Fernbedienung bei Image mit Kernel 2.6

Alles eine Frage des Images
Antworten
nr13
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Freitag 23. Januar 2009, 23:34

Einschalten über Fernbedienung bei Image mit Kernel 2.6

Beitrag von nr13 »

Hallo,
ich habe folgendes Problem bei allen Images mit Kernel 2.6.
Wenn ich die D-Box2 (avia500) über die Fernbedienung einschalte läßt sich diese nach dem Hochfahren prozessicher nicht mehr bedienen, Fernsehbild läuft aber. Die grüne LED an der Box blickt beim Betätigen der Fernbedienung, aber sonst keine Reaktion! Beim Drücken einer der 3 Tasten an der Box, schaltet sich diese direkt ab, ebenso beim Drücken der Pfeiltasten.
Wird die Box nicht über die Fernbedienung sondern über eine der 3 Tasten an der Box eingeschaltet funktioniert alles einwandfrei, inkl. Fernbedienung!
In einem anderen Thread hat tine1084 ebenfalls dieses Problem bestätigt.

Hat jemand eine Lösung hierfür? Ich würde mich sehr über eine Antwort freuen.

Danke
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: Einschalten über Fernbedienung bei Image mit Kernel 2.6

Beitrag von seife »

- Ohne ein bootlog werden wir nie sagen können was passiert
- Evtl. wirst du in die entsprechenden Kernel-Treiber etwas debugging-output einbauen müssen.

Ich vermute, dass der FP müll in seiner Queue hat, der erst geleert werden müsste.
nr13
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Freitag 23. Januar 2009, 23:34

Re: Einschalten über Fernbedienung bei Image mit Kernel 2.6

Beitrag von nr13 »

Hallo,
leider habe ich bis jetzt noch keine Lösung für mein Problem finden können, hat jemand vielleicht noch ein Tip?
Ein bootlog habe ich, nur ist so gut wie kein Unterschied zwischen dem bootlog durch das Einschalten mit der Fernbedienung (nicht OK) und dem Einschalten über den Knopf an der DBox (OK).

bootlog mit der Fernbedienung eingeschalten (nicht OK):

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-00.d7.de.06.00.00-f7
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 160736
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Apr 8 2009 - 01:27:53)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: console on ttyCPM0 (2.6)
2: console on fb0
3: console on ttyS0 (2.4)
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 983364 bytes loaded to 0x200000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00200000 ...
Image Name: Linux-2.6.26.8-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 983300 Bytes = 960.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
[ 0.000000] Linux version 2.6.26.8-dbox2 (dietmarw@s2.dvdvd.de) (gcc version
3.4.6) #1 PREEMPT Wed Apr 8 01:30:34 CEST 2009
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 8192
[ 0.000000] Normal 8192 -> 8192
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 8192
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 8128
[ 0.000000] Kernel command line: console=ttyS0,9600 dbox_duplex=0 root=/dev/m
tdblock2 rootfstype=squashfs
[ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
[ 0.000000] Decrementer Frequency = 252000000/60
[ 0.000000] m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
[ 0.000000] m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
[ 10.921293] Console: colour dummy device 80x25
[ 10.921457] cpm_uart: console: compat mode
[ 10.921699] console [ttyCPM0] enabled
[ 11.967040] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 12.045791] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 12.136164] Memory: 30280k available (1620k kernel code, 472k data, 68k init,
0k highmem)
[ 12.452860] Mount-cache hash table entries: 512
[ 12.520903] net_namespace: 192 bytes
[ 12.562521] NET: Registered protocol family 16
[ 12.712107] NET: Registered protocol family 2
[ 12.861634] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 12.942664] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 13.024340] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 13.100129] TCP: Hash tables configured (established 1024 bind 1024)
[ 13.175941] TCP reno registered
[ 13.241802] NET: Registered protocol family 1
[ 13.291012] dbox2: Nokia board detected.
[ 13.357187] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[ 13.423984] JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
[ 13.498598] io scheduler noop registered
[ 13.542119] io scheduler deadline registered (default)
[ 13.633849] Serial: CPM driver $Revision: 0.02 $
[ 13.686262] cpm_uart: WARNING: no UART devices found on platform bus!
[ 13.762877] cpm_uart: the driver will guess configuration, but this mode is n
o longer supported.
[ 13.868270] ttyCPM0 at MMIO 0xff000a80 (irq = 20) is a CPM UART
[ 13.940867] ttyCPM1 at MMIO 0xff000a90 (irq = 19) is a CPM UART
[ 14.046825] loop: module loaded
[ 14.081236] Linux video capture interface: v2.00
[ 14.140963] D-Box 2 flash driver (size->0x800000 mem->0x10000000)
[ 14.214258] D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
[ 14.294659] Intel/Sharp Extended Query Table at 0x0035
[ 14.356871] Using auto-unlock on power-up/resume
[ 14.411992] cfi_cmdset_0001: Erase suspend on write enabled
[ 14.479074] Creating 6 MTD partitions on "D-Box 2 flash memory":
[ 14.550491] 0x00000000-0x00020000 : "BR bootloader"
[ 14.617807] 0x00020000-0x00040000 : "FLFS (U-Boot)"
[ 14.682200] 0x00040000-0x006a0000 : "root (squashfs)"
[ 14.750377] 0x006a0000-0x00800000 : "var (JFFS2)"
[ 14.812601] 0x00020000-0x00800000 : "Flash without bootloader"
[ 14.890414] 0x00000000-0x00800000 : "Complete Flash"
[ 14.957694] mice: PS/2 mouse device common for all mice
[ 15.022735] half-duplex mode enabled
[ 15.066840] eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:12:ae:66
[ 15.135870] TCP cubic registered
[ 15.174512] NET: Registered protocol family 17
[ 15.244757] VFS: Mounted root (squashfs filesystem) readonly.
[ 15.324368] Freeing unused kernel memory: 68k it
init started: BusyBox v1.7.2 (2009-04-08 01:32:08 CEST)
starting pid 124, tty '': '/etc/init.d/rcS'
/bin/makedevices
mount: using /etc/fstab
mount: using /etc/fstab
Detected STB:
Vendor: Nokia
Model: D-BOX2 (2 flash chips)
[ 19.245085] [i2c-8xx]: mpc 8xx i2c init
[ 19.313791] [i2c-8xx]: adapter: 0
[ 19.766875] event: $Id: event.c,v 1.12.4.3 2007/10/09 01:04:05 carjay Exp $
[ 20.243024] lcd: init lcd driver module
[ 20.310339] lcd: found KS0713/SED153X lcd interface
[ 20.741007] input: DBOX-2 FP IR as /devices/virtual/input/input0
[ 21.393545] $Id: cam.c,v 1.30.2.6 2007/10/09 01:03:38 carjay Exp $
[ 21.464435] firmware: requesting cam-alpha.bin
[ 22.268060] avia_av: $Id: avia_av_core.c,v 1.98.2.14 2009/01/17 07:09:44 seif
e Exp $
[ 22.358007] firmware: requesting avia500.ux
[ 23.011322] avia_av_core: decoder watchdog thread started.
[ 23.073837] avia_av_event: $Id: avia_av_event.c,v 1.11.4.1 2005/01/21 21:23:3
8 carjay Exp $
[ 23.347490] avia_av_proc: $Id: avia_av_proc.c,v 1.14.2.6 2009/02/12 21:00:36
rhabarber1848 Exp $
[ 23.847038] avia_gt_core: $Id: avia_gt_core.c,v 1.48.2.6 2007/10/09 01:03:38
carjay Exp $
[ 23.941841] avia_gt_core: autodetecting chip type... GTX
[ 24.005484] avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Ex
p $
[ 24.347261] avia_gt_accel: $Id: avia_gt_accel.c,v 1.19.4.1 2007/10/09 01:03:3
8 carjay Exp $
[ 24.444210] avia_gt_core: masking unhandled irq reg 1 bit 11
[ 24.511747] avia_gt_core: masking unhandled irq reg 1 bit 13
[ 24.579540] avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210.2.9 2008/11/23 10:26:25 s
eife Exp $
[ 24.675277] firmware: requesting ucode.bin
[ 24.772132] avia_gt_ucode: loaded ucode vB107
[ 24.829109] avia_gt_ucode: ucode section filters disabled.
[ 24.892436] avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536)
, aligning...
[ 24.991639] avia_gt_gv: $Id: avia_gt_gv.c,v 1.39.2.5 2007/10/09 01:03:38 carj
ay Exp $
[ 25.084562] avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen E
xp $
[ 25.173689] avia_gt_pcm_set_rate(44100)
[ 25.219033] avia_gt_capture: $Id: avia_gt_capture.c,v 1.32.4.5 2007/10/09 01:
03:38 carjay Exp $
[ 25.323452] avia_gt_pig: $Id: avia_gt_pig.c,v 1.40.4.3 2007/10/09 01:03:38 ca
rjay Exp $
[ 25.419391] avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26.4.1 2007/10/09 01:03:39 ca
rjay Exp $
[ 25.514819] avia_gt_ir: $Id: avia_gt_ir.c,v 1.30.4.6 2008/09/19 22:43:42 seif
e Exp $
[ 25.607709] avia_gt_core: Loaded AViA eNX/GTX driver
[ 25.972751] $Id: dbox2_napi_core.c,v 1.1.2.14 2007/10/09 21:52:21 carjay Exp
$
[ 26.055844] DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/6
00)
[ 26.146474] ves1x93: Detected ves1893a rev2
[ 26.194790] DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
[ 26.300969] avia_av_napi: $Id: dbox2_avia_av_napi.c,v 1.1.2.2 2009/01/17 07:0
9:44 seife Exp $
[ 26.451123] $Id: dbox2_cam_napi.c,v 1.1.2.1 2005/01/31 03:04:12 carjay Exp $
[ 26.567105] avia_gt_napi: $Id: dbox2_avia_gt_napi.c,v 1.1.2.5 2009/01/17 07:0
9:44 seife Exp $
[ 27.052329] avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54.2.5 2007/10/09 01:03:38
carjay Exp $
[ 27.191222] Console: switching to colour frame buffer device 90x36
[ 27.345939] avia_gt_fb: fb0: AViA eNX/GTX FB frame buffer device
[ 27.723535] avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14.4.7 2007/10/09 01:03:38
carjay Exp $
[ 28.166175] avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Ex
p $
[ 28.251814] avia_gt_pcm_set_rate(44100)
[ 28.680143] avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12.4.4 2007/10/09 01:03:38
carjay Exp $
Starting the automounter
[ 31.078220] RPC: Registered udp transport module.
[ 31.131329] RPC: Registered tcp transport module.
starting pid 315, tty '': '/etc/init.d/start'

Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.290 2009/04/03 14:59:06 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.425 2009/03/22 22:06:22 rhabarber1848 Exp $
[frontend] uncommitted_switch_mo[ 35.395673] avia_gt_core: masking unhandled i
rq reg 0 bit 6
de 0 auto_fec 0
[camd] no card is in slot #2
[camd] a card is in slot #1
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
[neutrino] enable flash
[neutrino] Software update enabled
[camd] no card is in slot #2
[camd] a card is in slot #1
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 38 (Function not implemented)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] received 17 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[ 48.722047] avia_gt_core: masking unhandled irq reg 0 bit 7
[zapit] tuned frequency does not match request. difference: 3437
[ 48.833463] avia_gt_dmx: queue_data_move: queue 8: 188 bytes requested, 0 ava
ilable
[ 49.003556] avia_gt_dmx: queue_data_move: queue 5: 188 bytes requested, 0 ava
ilable
[ 49.126484] avia_av: setting stream type AVIA_AV_STREAM_TYPE_PES/AVIA_AV_STRE
AM_TYPE_PES
[ 49.275719] PES, queue 0 normal.
[timeThread] - 10.04.2009 17:06:54, tim: Fri Apr 10 17:06:54 2009
[ 49.383992] avia_gt_core: masking unhandled irq reg 1 bit 15

[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
TuxTxt running thread...(068)
TuxTxt service started 68
17:06:54.357 dmxSDT: going to sleep...
17:06:54.455 dmxCN: going to sleep...
17:06:54.457 eit_set_update_filter, servicekey = 0x44d00016dca, current version
31


bootlog an der DBox eingeschalten (OK):

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-00.d7.de.06.00.00-f7
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 160736
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Apr 8 2009 - 01:27:53)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: console on ttyCPM0 (2.6)
2: console on fb0
3: console on ttyS0 (2.4)
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 983364 bytes loaded to 0x200000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00200000 ...
Image Name: Linux-2.6.26.8-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 983300 Bytes = 960.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
[ 0.000000] Linux version 2.6.26.8-dbox2 (dietmarw@s2.dvdvd.de) (gcc version
3.4.6) #1 PREEMPT Wed Apr 8 01:30:34 CEST 2009
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 8192
[ 0.000000] Normal 8192 -> 8192
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 8192
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 8128
[ 0.000000] Kernel command line: console=ttyS0,9600 dbox_duplex=0 root=/dev/m
tdblock2 rootfstype=squashfs
[ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
[ 0.000000] Decrementer Frequency = 252000000/60
[ 0.000000] m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
[ 0.000000] m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
[ 12.161301] Console: colour dummy device 80x25
[ 12.161465] cpm_uart: console: compat mode
[ 12.161707] console [ttyCPM0] enabled
[ 13.207044] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 13.285797] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 13.376162] Memory: 30280k available (1620k kernel code, 472k data, 68k init,
0k highmem)
[ 13.692867] Mount-cache hash table entries: 512
[ 13.760879] net_namespace: 192 bytes
[ 13.802527] NET: Registered protocol family 16
[ 13.952118] NET: Registered protocol family 2
[ 14.101643] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 14.182670] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 14.264368] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 14.340110] TCP: Hash tables configured (established 1024 bind 1024)
[ 14.415949] TCP reno registered
[ 14.481810] NET: Registered protocol family 1
[ 14.531020] dbox2: Nokia board detected.
[ 14.597190] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[ 14.663990] JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
[ 14.738604] io scheduler noop registered
[ 14.782126] io scheduler deadline registered (default)
[ 14.873881] Serial: CPM driver $Revision: 0.02 $
[ 14.926217] cpm_uart: WARNING: no UART devices found on platform bus!
[ 15.002885] cpm_uart: the driver will guess configuration, but this mode is n
o longer supported.
[ 15.108276] ttyCPM0 at MMIO 0xff000a80 (irq = 20) is a CPM UART
[ 15.180869] ttyCPM1 at MMIO 0xff000a90 (irq = 19) is a CPM UART
[ 15.286836] loop: module loaded
[ 15.321244] Linux video capture interface: v2.00
[ 15.380971] D-Box 2 flash driver (size->0x800000 mem->0x10000000)
[ 15.454322] D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
[ 15.534604] Intel/Sharp Extended Query Table at 0x0035
[ 15.596877] Using auto-unlock on power-up/resume
[ 15.651998] cfi_cmdset_0001: Erase suspend on write enabled
[ 15.719079] Creating 6 MTD partitions on "D-Box 2 flash memory":
[ 15.790497] 0x00000000-0x00020000 : "BR bootloader"
[ 15.857816] 0x00020000-0x00040000 : "FLFS (U-Boot)"
[ 15.922204] 0x00040000-0x006a0000 : "root (squashfs)"
[ 15.990390] 0x006a0000-0x00800000 : "var (JFFS2)"
[ 16.052628] 0x00020000-0x00800000 : "Flash without bootloader"
[ 16.130398] 0x00000000-0x00800000 : "Complete Flash"
[ 16.197713] mice: PS/2 mouse device common for all mice
[ 16.262739] half-duplex mode enabled
[ 16.306847] eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:12:ae:66
[ 16.375876] TCP cubic registered
[ 16.414518] NET: Registered protocol family 17
[ 16.484765] VFS: Mounted root (squashfs filesystem) readonly.
[ 16.564205] Freeing unused kernel memory: 68k it
init started: BusyBox v1.7.2 (2009-04-08 01:32:08 CEST)
starting pid 124, tty '': '/etc/init.d/rcS'
/bin/makedevices
mount: using /etc/fstab
mount: using /etc/fstab
Detected STB:
Vendor: Nokia
Model: D-BOX2 (2 flash chips)
[ 20.481424] [i2c-8xx]: mpc 8xx i2c init
[ 20.549735] [i2c-8xx]: adapter: 0
[ 20.993370] event: $Id: event.c,v 1.12.4.3 2007/10/09 01:04:05 carjay Exp $
[ 21.468271] lcd: init lcd driver module
[ 21.535683] lcd: found KS0713/SED153X lcd interface
[ 21.961036] input: DBOX-2 FP IR as /devices/virtual/input/input0
[ 22.613835] $Id: cam.c,v 1.30.2.6 2007/10/09 01:03:38 carjay Exp $
[ 22.684671] firmware: requesting cam-alpha.bin
[ 23.489188] avia_av: $Id: avia_av_core.c,v 1.98.2.14 2009/01/17 07:09:44 seif
e Exp $
[ 23.579286] firmware: requesting avia500.ux
[ 24.231735] avia_av_core: decoder watchdog thread started.
[ 24.294023] avia_av_event: $Id: avia_av_event.c,v 1.11.4.1 2005/01/21 21:23:3
8 carjay Exp $
[ 24.506419] avia_av_proc: $Id: avia_av_proc.c,v 1.14.2.6 2009/02/12 21:00:36
rhabarber1848 Exp $
[ 25.005601] avia_gt_core: $Id: avia_gt_core.c,v 1.48.2.6 2007/10/09 01:03:38
carjay Exp $
[ 25.100441] avia_gt_core: autodetecting chip type... GTX
[ 25.164269] avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Ex
p $
[ 25.506549] avia_gt_accel: $Id: avia_gt_accel.c,v 1.19.4.1 2007/10/09 01:03:3
8 carjay Exp $
[ 25.604101] avia_gt_core: masking unhandled irq reg 1 bit 11
[ 25.671528] avia_gt_core: masking unhandled irq reg 1 bit 13
[ 25.739193] avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210.2.9 2008/11/23 10:26:25 s
eife Exp $
[ 25.835438] firmware: requesting ucode.bin
[ 25.932143] avia_gt_ucode: loaded ucode vB107
[ 25.989685] avia_gt_ucode: ucode section filters disabled.
[ 26.053365] avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536)
, aligning...
[ 26.151956] avia_gt_gv: $Id: avia_gt_gv.c,v 1.39.2.5 2007/10/09 01:03:38 carj
ay Exp $
[ 26.245582] avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen E
xp $
[ 26.334816] avia_gt_pcm_set_rate(44100)
[ 26.380110] avia_gt_capture: $Id: avia_gt_capture.c,v 1.32.4.5 2007/10/09 01:
03:38 carjay Exp $
[ 26.484542] avia_gt_pig: $Id: avia_gt_pig.c,v 1.40.4.3 2007/10/09 01:03:38 ca
rjay Exp $
[ 26.580323] avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26.4.1 2007/10/09 01:03:39 ca
rjay Exp $
[ 26.675757] avia_gt_ir: $Id: avia_gt_ir.c,v 1.30.4.6 2008/09/19 22:43:42 seif
e Exp $
[ 26.768290] avia_gt_core: Loaded AViA eNX/GTX driver
[ 27.134174] $Id: dbox2_napi_core.c,v 1.1.2.14 2007/10/09 21:52:21 carjay Exp
$
[ 27.217839] DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/6
00)
[ 27.308059] ves1x93: Detected ves1893a rev2
[ 27.357095] DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
[ 27.461001] avia_av_napi: $Id: dbox2_avia_av_napi.c,v 1.1.2.2 2009/01/17 07:0
9:44 seife Exp $
[ 27.611006] $Id: dbox2_cam_napi.c,v 1.1.2.1 2005/01/31 03:04:12 carjay Exp $
[ 27.728677] avia_gt_napi: $Id: dbox2_avia_gt_napi.c,v 1.1.2.5 2009/01/17 07:0
9:44 seife Exp $
[ 28.213249] avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54.2.5 2007/10/09 01:03:38
carjay Exp $
[ 28.351240] Console: switching to colour frame buffer device 90x36
[ 28.507024] avia_gt_fb: fb0: AViA eNX/GTX FB frame buffer device
[ 28.884571] avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14.4.7 2007/10/09 01:03:38
carjay Exp $
[ 29.326862] avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Ex
p $
[ 29.412832] avia_gt_pcm_set_rate(44100)
[ 29.840466] avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12.4.4 2007/10/09 01:03:38
carjay Exp $
Starting the automounter
[ 32.235966] RPC: Registered udp transport module.
[ 32.289083] RPC: Registered tcp transport module.
starting pid 315, tty '': '/etc/init.d/start'

Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.290 2009/04/03 14:59:06 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.425 2009/03/22 22:06:22 rhabarber1848 Exp $
[frontend] uncommitted_switch_mo[ 36.550853] avia_gt_core: masking unhandled i
rq reg 0 bit 6
de 0 auto_fec 0
[camd] no card is in slot #2
[camd] a card is in slot #1
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[camd] no card is in slot #2
[camd] a card is in slot #1
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 38 (Function not implemented)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] received 17 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[ 49.814875] avia_gt_dmx: queue_data_move: queue 8: 188 bytes requested, 0 ava
ilable
[ 49.951967] avia_gt_core: masking unhandled irq reg 0 bit 7
[zapit] tuned frequency does not match request. difference: 3437
[ 50.114513] avia_gt_dmx: queue_data_move: queue 5: 188 bytes requested, 0 ava
ilable
[ 50.269292] avia_av: setting stream type AVIA_AV_STREAM_TYPE_PES/AVIA_AV_STRE
AM_TYPE_PES
[ 50.394714] PES, queue 0 normal.
[ 50.482975] avia_gt_core: masking unhandled irq reg 1 bit 15
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
TuxTxt running thread...(068)
[timeThread] - 10.04.2009 17:01:29, tim: Fri Apr 10 17:01:29 2009
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
TuxTxt service started 68
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
17:01:30.003 dmxSDT: going to sleep...
17:01:30.136 dmxCN: going to sleep...
17:01:30.138 eit_set_update_filter, servicekey = 0x44d00016dca, current version
31
Antworten