128 MB RAM Bootprobleme

[MPC823]

Also ich blicke da nicht mehr ganz durch.

Wie es den das nun bei der Dbox genau ?

Also beim Booten ist der Flash vorne und hinter dem Falsh das Ram. dann kopiert sich der Bmon ins RAM und der Speicherbereich wird umgeschalten also ist dann das RAM vorne und hinter dem RAM auf 0x10000000 der Flash.

Was mich nun etwas iritiert ist das der Flash genau hinter den 32 MB Ram liegt. Was ist nun wenn ich mehr als 32 MB habe ?

Mit 64 MB gibts da wohl keine Problem was mir schon ein bischen unverständlich ist aber ich habe nun 128 MB und das macht nun Probleme wenn ich aus dem falsh boote. Liegt der Speicherbereich vom Flash den nun immer hinter den ersten 32 MB ?

Warum geht es dann mit 64 MB aber nicht mit 128 MB intern wenn es doch mit 64 +64 ja auch geht. Konnte es eventell daran liegen das bei zwei mal 64 MB der Speicher ja noch mit der Chipselect Leitung umgeschalten wird und bei 128 MB intern nicht ?

Kann es sein das es nun eine Konflikt mit den oberen 64 MB gibt da der Flash und das Ram dann parr sind ?

Hat da jemand eine Idee ?


Martin

[MPC823]

Also ich habe nun folgendes feststellen können :

Ich konnte immer nur einmal mit dem DBOX2 Manager ein frisch entpacktes CDK booten. Beim zweiten mal blieb die Gui beim hochfahren hängen.

Dann habe ich mir wie im Wiki Beschrieben eine eigen Yaad gebaut und unter Linux gebootete. Dies hat auch immer nur einmal funktioniert.

Dann habe ich eine "normale" (32 MB) D-box angeschlossen diese fährt hoch.

Ich habe festgestellt das in einem neuen cdk unter ..../cdkroot/lib/modules beim ersten booten dateien generiert werden. Dort liegt dann eine modules.dep . Wenn diese vorhanden ist bootet eine Box mit mehr als 32 MB nicht mehr vom cdk. Wenn diese Datei gelöscht wird bootet die Box normal.

Anbei ein avia500_32MB.log#

setenv serverip 192.168.0.14; setenv ipaddr 192.168.0.202
=> tftpboot 200000 kernel-cdk
Using SCC ETHERNET device
TFTP from server 192.168.0.14; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x200000
Loading: *#################################################################
#################################################################
################################

Bytes transferred = 824567 (c94f7 hex)
=> setenv bootargs console=ttyS0,9600 root=/dev/nfs rw nfsroot=192.168.0.14:/home/martin/dbox-neutrino/dbox2/cdkroot/ ip=192.168.0.202:192.168.0.14:192.168.0.1:255.255.255.0:dbox::off
=> bootm
## Booting image at 00200000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 824503 Bytes = 805.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37-dbox2 (martin@Mac-Mini) (gcc version 3.4.6) #2 Mo 27. Apr 23:03:57 CEST 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/nfs rw nfsroot=192.168.0.14:/home/martin/dbox-neutrino/dbox2/cdkroot/ ip=192.168.0.202:192.168.0.14:192.168.0.1:255.255.255.0:dbox::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30452k available (1400k kernel code, 444k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:11:26:87
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006e0000 : "root (squashfs)"
0x006e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=192.168.0.1,
host=dbox, domain=, nis-domain=(none),
bootserver=192.168.0.14, rootserver=192.168.0.14, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.14
Looking up port of RPC 100005/1 on 192.168.0.14
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.7.2 (2009-04-27 23:06:40 CEST)
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
dboxide: $Id: main.c,v 1.13 2009/01/13 22:13:23 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc389d000
dboxide: probing dbox2 IDE CPLD: walking bit test failed: 0x00000001 != 0xc00b0001
dboxide: no valid IDE-Interface detected
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
modprobe: Can't locate module ext2
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
modprobe: Can't locate module jbd
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
modprobe: Can't locate module ext3
Note: /etc/modules.conf is more recent than /lib/modules/2.4.37-dbox2/modules.dep
SGI XFS with no debug enabled
mount: using /etc/fstab
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory
ifup: interface lo already configured
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2 (2 flash chips)
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB102
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Starting the automounter

Please press Enter to activate this console.


BusyBox v1.7.2 (2009-04-27 23:06:40 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

-sh: can't access tty; job control turned off
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...# OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[lcdmenu] /bin/radiobox was not found, entry Radiobox discarded
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.291 2009/04/10 11:53:43 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.427 2009/04/26 19:58:22 seife Exp $
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] received 17 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] tuned frequency does not match request. difference: 859
PES, queue 0 normal.
[neutrino] no file /var/tuxbox/config/init.end was found
avia_gt_core: masking unhandled irq reg 1 bit 15
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[timeThread] - 28.04.2009 11:35:51, tim: Tue Apr 28 11:35:51 2009
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
11:35:52.009 dmxSDT: going to sleep...
11:35:52.106 dmxCN: going to sleep...
11:35:52.107 eit_set_update_filter, servicekey = 0x41b00017032, current version 9
11:36:39.618 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
11:36:48.225 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
11:37:08.543 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
11:37:29.106 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
11:37:49.254 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
11:38:24.144 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x61 mask 0xf1
halt
# CXA2092 found
The system is going down NOW!
Sending SIGTERM to all processes
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CONTROLD] eventwatchdog poll(): Interrupted system call
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes
Requesting system halt

Bootlog avia600_128MB_cdk-neu.log

setenv serverip 192.168.0.14; setenv ipaddr 192.168.0.202; tftpboot 200000 kernel-cdk
Using SCC ETHERNET device
TFTP from server 192.168.0.14; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x200000
Loading: *#################################################################
#################################################################
################################

Bytes transferred = 824567 (c94f7 hex)
=> setenv bootargs console=ttyS0,9600 root=/dev/nfs rw nfsroot=192.168.0.14:/home/martin/dbox-neutrino/dbox2/cdkroot/ ip=192.168.0.202:192.168.0.14:192.168.0.1:255.255.255.0:dbox::off;bootm
## Booting image at 00200000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 824503 Bytes = 805.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37-dbox2 (martin@Mac-Mini) (gcc version 3.4.6) #2 Mo 27. Apr 23:03:57 CEST 2009
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/nfs rw nfsroot=192.168.0.14:/home/martin/dbox-neutrino/dbox2/cdkroot/ ip=192.168.0.202:192.168.0.14:192.168.0.1:255.255.255.0:dbox::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 127600k available (1400k kernel code, 444k data, 72k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:6a:d9
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006e0000 : "root (squashfs)"
0x006e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=192.168.0.1,
host=dbox, domain=, nis-domain=(none),
bootserver=192.168.0.14, rootserver=192.168.0.14, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.14
Looking up port of RPC 100005/1 on 192.168.0.14
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.7.2 (2009-04-27 23:06:40 CEST)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
modprobe: Can't open dependencies file /lib/modules/2.4.37-dbox2/modules.dep (No such file or directory)
mount: using /etc/fstab
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such device
ifup: interface lo already configured
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2 (2 flash chips)
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB102
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Starting the automounter

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[lcdmenu] /bin/radiobox was not found, entry Radiobox discarded
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.291 2009/04/10 11:53:43 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.427 2009/04/26 19:58:22 seife Exp $
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] received 17 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] tuned frequency does not match request. difference: 687
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[timeThread] - 28.04.2009 11:53:08, tim: Tue Apr 28 11:53:08 2009
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
11:53:08.912 dmxSDT: going to sleep...
11:53:09.015 dmxCN: going to sleep...
11:53:09.016 eit_set_update_filter, servicekey = 0x41b00017032, current version 9

Bootlog avia600_128MB_cdk.log (Box fährt das GUI nicht mehr hoch.

setenv serverip 192.168.0.14; setenv ipaddr 192.168.0.202; tftpboot 200000 kernel-cdk; setenv bootargs console=ttyS0,9600 root=/dev/nfs rw nfsroot=192.168.0.14:/home/martin/dbox-neutrino/dbox2/cdkroot/ ip=192.168.0.202:192.168.0.14:192.168.0.1:255.255.25
Using SCC ETHERNET device
TFTP from server 192.168.0.14; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x200000
Loading: *#################################################################
#################################################################
################################

Bytes transferred = 824567 (c94f7 hex)
=> setenv bootargs console=ttyS0,9600 root=/dev/nfs rw nfsroot=192.168.0.14:/home/martin/dbox-neutrino/dbox2/cdkroot/ ip=192.168.0.202:192.168.0.14:192.168.0.1:255.255.255.0:dbox::off;bootm
## Booting image at 00200000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 824503 Bytes = 805.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37-dbox2 (martin@Mac-Mini) (gcc version 3.4.6) #2 Mo 27. Apr 23:03:57 CEST 2009
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/nfs rw nfsroot=192.168.0.14:/home/martin/dbox-neutrino/dbox2/cdkroot/ ip=192.168.0.202:192.168.0.14:192.168.0.1:255.255.255.0:dbox::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 127600k available (1400k kernel code, 444k data, 72k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:6a:d9
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006e0000 : "root (squashfs)"
0x006e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=192.168.0.1,
host=dbox, domain=, nis-domain=(none),
bootserver=192.168.0.14, rootserver=192.168.0.14, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.14
Looking up port of RPC 100005/1 on 192.168.0.14
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.7.2 (2009-04-27 23:06:40 CEST)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.13 2009/01/13 22:13:23 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc989d000
dboxide: probing dbox2 IDE CPLD: walking bit test failed: 0x00000001 != 0xc00a0000
dboxide: no valid IDE-Interface detected
modprobe: Can't locate module ext2
modprobe: Can't locate module jbd
modprobe: Can't locate module ext3
SGI XFS with no debug enabled
mount: using /etc/fstab
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory
ifup: interface lo already configured
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2 (2 flash chips)
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_av failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_gt failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_gt_fb failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_gt_lirc failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_gt_oss failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_gt_v4l2 failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_av_napi failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod avia_gt_napi failed
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod /lib/modules/2.4.37-dbox2/misc/avia_av.o failed
/lib/modules/2.4.37-dbox2/misc/avia_av.o: insmod aviaEXT failed
Starting the automounter

Please press Enter to activate this console. [LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...

BusyBox v1.7.2 (2009-04-27 23:06:40 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

-sh: can't access tty; job control turned off
OK (Micron/Regular)
[LCDFONT] Intializing font cache...#
[lcdmenu] /bin/radiobox was not found, entry Radiobox discarded
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.291 2009/04/10 11:53:43 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[timerd] woke up from timer? false!
[camd] /dev/dvb/adapter0/demux0: No such file or directory
cat: can't open '/proc/bus/avia_version': No such file or directory
[: avia600: unknown operand
[sectionsd] getUTC: open: No such file or directory
$Id: zapit.cpp,v 1.427 2009/04/26 19:58:22 seife Exp $
[frontend] uncommitted_switch_mode 0 auto_fec 0
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[sectionsd] getUTC: open: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:CVideo:38] /dev/dvb/adapter0/video0: No such file or directory
[CVideo::setVideoFormat] output format: 4:3(LB)
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver starting...
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[sectionsd] getUTC: open: No such file or directory
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[camd] /dev/dvb/adapter0/demux0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[section

Irgendwie scheint es evt an der Reihenfolge zu liegen wie die Treiber gestartet werden.

Vorschläge zur Lösung des Problems sind willkommen.


Was mich etwas verwundert hat niemand Yadd Probleme mit 64 MB Boxen ?

Martin

[rhabarber1848]

avia_av: microcode verify: 31552 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (000000a0)
/lib/modules/2.4.37-dbox2/misc/avia_av.o: init_module: Input/output error

Diese Meldung deutet üblicherweise auf einen Hardwaredefekt hin,
was aber komisch ist, wenn die Box beim ersten Mal bootet.
Hast Du es mal mit Kernel 2.6 probiert?
Hast Du schon versucht, vor dem zweiten Bootvorgang die
Box vom Strom zu trennen oder modules.dep vorher zu löschen?

Was mich etwas verwundert hat niemand Yadd Probleme mit 64 MB Boxen ?

Habe hier eine Sagem-Kabelbox, 32MB on-board, 32MB im
Erweiterungsslot, läuft ohne Probleme mit Flash und Yadd.

[MPC823]

Ja die Box fährt hoch sobald die modules.dep gelöscht ist.

Hardwarefehler kann ich auch keinen erkennen da alles soweit funktiniert.

evt werden die Treiber mit der Datei anders geladen.

Martin

[Stingray]

Welchen Inhalt hat denn die Datei modules.dep ?
Es sieht so aus als wenn es hier Probleme bzw. Hardwarekonflikte mit dem Avia-Ram gibt, wenn die Datei modules.dep vorhanden ist.

[MPC823]

Dort steht halt drin wie der Kernel die Module läd.

Mir hat jemand aber gesagt das diese Datei erst ab dem 2.6er Kernel zum tragen kommt .

es schein die reihenfolge der Module ein Problem zu sein, den ohne die Datei werden die Module ja auch geladen vermutlich nur eben in einer anderen reihenfolge.

Weiss jemand wie man sich die Reihenfolge wie die Module geladen werden anzeigen kann ? Irgendwie kann ich gerade keine logic erkennen .

Martin

[seife]

im flash wird modprobe nur mit kernel 2.6 benutzt. Beim Yadd weiss ich es nicht.
die modules.dep sagt dem modprobe, welche module wie voneinander abhängen.
Das Einzige was ich mir vorstellen kann ist, dass sich, wenn die da ist, entweder das Timing oder die Reihenfolge des Modulladens ändert.