Nokia 2XI SAT kein Empfang mehr

Boxenweitwurf
Antworten
xn78319
Beiträge: 2
Registriert: Sonntag 30. August 2009, 09:00

Nokia 2XI SAT kein Empfang mehr

Beitrag von xn78319 »

Hallo,

seit gestern empfängt meine NOKIA DBOX2 SAT keine Sender mehr.

Inzwischen habe ich neu geflasht aber der Fehler bleibt, dann habe ich die Tunerspannungen gemessen wie unter dboxharware.de beschrieben. Die Spannungen sind auch alle OK, bis auf den Pin 2 des Tuner hier habe ich immer ca. 15V (keine Box am Antennenausgang angeschlossen).

Hier mal ein Log von meiner Box:

Ich hoffe ihr könnt damit etwas anfangen.

An dem Antennenanschluss an dem die Box betrieben wird hat eine Dreambox bzw. ein anderer SAT-Receiver einwandfreien Empfang.


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.175, My IP 192.168.0.202
debug: Sending TFTP-request for file F/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.175; our IP address is 192.168.0.202
Filename 'F/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.175; our IP address is 192.168.0.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.175; our IP address is 192.168.0.202
Filename 'F/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.175; our IP address is 192.168.0.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0

Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit

Size: 8192 kB in 71 Sectors

Using SCC ETHERNET device
TFTP from server 192.168.0.175; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


dbox2 - ImageFlashingAssistent

- Hallenberg.com -

Wilkommen auf ihrer dbox2


Starte Backup....
Schreibe Backup: 8064k von 8064k (100%)
Backup abgeschlossen!
Der Flashprozess wird nun gestartet...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)
Flashen beendet!

Sie koennen die dbox jetzt ausschalten.


Please press Enter to activate this console.


BusyBox v0.60.2 (2002.02.26-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

# reset
c# reboot

The system is going down NOW !!
Sending SIGTERM to all processesTerminated
# Sending SIGKILL to all processes.
Please stand by while rebooting the system.
‘$Id: sectionsd.cpp,v 1.303 2009/07/08 20:32:17 rhabarber1848 Exp $
[sectionsd] Caching max 1500 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[timerd] woke up from timer? false!
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.432k 2009/07/10 11:55:00 seife & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/plugins/operations camd_start
starte camd2
[camd2] EMM : active
[camd2] Socket=/tmp/camd.sock02
[camd] CA_SEND_MSG: Remote I/O error
[camd] CA_SEND_MSG: Remote I/O error
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 1 onid 85
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[sectionsd] getUTC: read: Connection timed out
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] executing mkdir -p /var/share/tuxbox/neutrino/icons/
[neutrino] alternate folder created in: /var/share/tuxbox/neutrino/icons/
[neutrino] executing mkdir -p /var/share/tuxbox/neutrino/lcdd
[neutrino] alternate folder created in: /var/share/tuxbox/neutrino/lcdd
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no
[neutrino] received 29 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] tuned frequency does not match request. difference: 2577
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[zapit] pat parsing failed
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
zap failed!
[zapit] tuned frequency does not match request. difference: 515
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[zapit] pat parsing failed
zap failed!
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[zapit] tuned frequency does not match request. difference: 515
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[zapit] pat parsing failed
[sectionsd] getUTC: read: Connection timed out
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[zapit] pat parsing failed
[sectionsd] getUTC: read: Connection timed out
neutrino: /var/tuxbox/ucodes/ucode.bin: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[zapit] tuned frequency does not match request. difference: 2578
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[zapit] pat parsing failed
zap failed!
[zapit] tuned frequency does not match request. difference: 2577
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[zapit] pat parsing failed
zap failed!
[controld] videoOutput off
[neutrino] executing /var/tuxbox/config/standby.on
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0
[controld] SAAIOSMODE: Invalid argument
[CVideo::setVideoFormat] output format: unknown (-1)
[CVideo] SAAIOSWSS: Invalid argument
Digital audio output turned off
[sectionsd] getUTC: read: Connection timed out

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Intel(R) PRO/100 VE-Netzwerkverbindung - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.0.175
IP-Adresse die die dbox bekommt: 192.168.0.202
Comport: Kommunikationsanschluss (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel Pentium III @ 0 MHz
Dateiname des Images: Keywelt_V1_Juli_2x_SQUASHFS_2009.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0


MFG

Andreas
JtG-Riker
Image-Team
Beiträge: 1015
Registriert: Freitag 7. Februar 2003, 18:37
Kontaktdaten:

Re: Nokia 2XI SAT kein Empfang mehr

Beitrag von JtG-Riker »

Bei der Box sind warscheinlich die SEC Rams defekt. Musst du zur Reparatur einsenden z.B. zu Gurgel oder Stingray

[camd] CA_SEND_MSG: Remote I/O error
[camd] CA_SEND_MSG: Remote I/O error

Aber eigendlich bekommst du mit dem Bastelimage keinen Support hier. Hier im Forum werden nur offizielle Images
ohne Vögel supportet.

Gruß Riker
xn78319
Beiträge: 2
Registriert: Sonntag 30. August 2009, 09:00

Re: Nokia 2XI SAT kein Empfang mehr

Beitrag von xn78319 »

Hallo,

vielen Dank für deine Info.

Ich habe einfach ein aktuelles Image aus dem Netz gezogen.

Habe allerdings nicht darauf geachtet das dieses nicht ganz sauber ist.


MfG

Andreas
rhabarber1848
CDK-Experte
Beiträge: 4335
Registriert: Donnerstag 3. April 2008, 14:05

Re: Nokia 2XI SAT kein Empfang mehr

Beitrag von rhabarber1848 »

xn78319 hat geschrieben:Ich habe einfach ein aktuelles Image aus dem Netz gezogen.
Schau mal hier: http://tuxbox.trale.de/
Antworten