Nokia Sat lässt sich nicht flashen

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Antworten
Superbunny79
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Freitag 3. Oktober 2003, 00:01

Nokia Sat lässt sich nicht flashen

Beitrag von Superbunny79 »

Hallo ich habe vom Bekannten eine Dbox erhalten im Debugmodus ohne System.

Nun per Hallenberg mal versucht ein Image zu flashen aber no chance Hallenberg bricht das immer ab.

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.22, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 173S77 (2bea5 hex)

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################################
	 ######################################################
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################################
	 ###############################################
done
Bytes transferred = 587229 (8f5dd hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    626984 Bytes = 612.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
   Image Name:   Ramdisk Image
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    587165 Bytes = 573.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.22, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 173S77 (2bea5 hex)

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################################
	 ######################################################
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################################
	 ###############################################
done
Bytes transferred = 587229 (8f5dd hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    626984 Bytes = 612.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
   Image Name:   Ramdisk Image
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    587165 Bytes = 573.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.22, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 173S77 (2bea5 hex)

-------------------------------------------------------------
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: AR5007 802.11b/g von Atheros (WiFi-Adapter) (0)
IP-Adresse des Netzwerkadapters: 192.168.0.22
IP-Adresse die die dbox bekommt: 192.168.0.202
Betriebssystem: Professional  (Build 7600)
CPU 1: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz @ 1994 MHz
CPU 2: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz @ 1995 MHz
Dateiname des Images: Flashimage2xI.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.2
------ Powered by http://www.dboxservice-hallenberg.de ------
MTM
Foren-Moderator
Beiträge: 944
Registriert: Freitag 21. Januar 2005, 16:18

Re: Nokia Sat lässt sich nicht flashen

Beitrag von MTM »

Superbunny79
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Freitag 3. Oktober 2003, 00:01

Re: Nokia Sat lässt sich nicht flashen

Beitrag von Superbunny79 »


Sorry ich teste es mal mit Yadi und poste den Log hier
Superbunny79
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Freitag 3. Oktober 2003, 00:01

Re: Nokia Sat lässt sich nicht flashen

Beitrag von Superbunny79 »

So das ganze mal mit einem Jag The Grabber probiert......

Der Flashimageassi hängt sich bei Lade Software immer weg und begint die Prozedur von vorn...

Liegt hier ein Hardware defekt vor???

Code: Alles auswählen

 ÿdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.22, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 173S77 (2bea5 hex)

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################################
	 ######################################################
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################################
	 ###############################################
done
Bytes transferred = 587229 (8f5dd hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    626984 Bytes = 612.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
   Image Name:   Ramdisk Image
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    587165 Bytes = 573.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.22, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 173S77 (2bea5 hex)

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################################
	 ######################################################
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################################
	 ###############################################
done
Bytes transferred = 587229 (8f5dd hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    626984 Bytes = 612.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
   Image Name:   Ramdisk Image
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    587165 Bytes = 573.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.22, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 173S77 (2bea5 hex)

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################################
	 ######################################################
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.0.22; our IP address is 192.168.0.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################################
	 ###############################################
done
Bytes transferred = 587229 (8f5dd hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    626984 Bytes = 612.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
   Image Name:   Ramdisk Image
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    587165 Bytes = 573.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.22, My IP 192.168.0.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
D
-------------------------------------------------------------
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1907E2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C1907E2 gesetzt
BootP: Antwort an 00509C1907E2 gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: AR5007 802.11b/g von Atheros (WiFi-Adapter) (0)
IP-Adresse des Netzwerkadapters: 192.168.0.22
IP-Adresse die die dbox bekommt: 192.168.0.202
Betriebssystem: Professional  (Build 7600)
CPU 1: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz @ 1994 MHz
CPU 2: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz @ 1994 MHz
Dateiname des Images: JtG_Neutrino_Komplett_2x__v2.3.3.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.2
------ Powered by http://www.dboxservice-hallenberg.de ------
Antworten