Hardwarefehler?

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Antworten
maccanicu
Neugieriger
Neugieriger
Beiträge: 12
Registriert: Donnerstag 15. März 2007, 19:58

Hardwarefehler?

Beitrag von maccanicu »

Hallo

habe eine Nokia Sat 2x1 intel er hat boot probleme und die sich nicht flashen läßt.
als er ging aber wenn ich den stecker gezogen vom dem strom und wider angeschlossen habe ging er nicht mehr ich musste warten bis er wider kalt wurde , nun jedoch geht es nicht mehr bootet .

hir die bootlog:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-32.65.45.07.00.00-66
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 154180
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (May 16 2007 - 19:19:31)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . Unknown node type: e002 len 4164 offset 0x354ec
Unknown node type: e002 len 4164 offset 0x36530
........ Unknown node type: e002 len 2601 offset 0x7297e4
Unknown node type: e002 len 2751 offset 0x72a210
. done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/JtG_Neutrino_Komplett_2x__v2.3.3.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again


Weiß jemand was genau defekt ist?

Danke
Antworten