Nokia dbox2 startet immer neu

Sammlung von Anleitungen und HowTos für dBox2
Antworten
batti
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Samstag 24. September 2011, 19:00

Nokia dbox2 startet immer neu

Beitrag von batti »

Hallo,

vorerst bin ich ein totaler Neuling auf diesem Gebiet. Gestern Abend habe ich mich aber nun mit der dbox2 beschäftigt, sie in debug-mode gebracht und ein neues Image draufgespielt. Hat alles super geklappt. Anschließend habe ich natürlich etwas TV geschaut und nachher nur den TV und nicht die dbox2 ausgeschaltet. Als ich dann morgens aufgewacht bin startete die dbox2 ständig neu. Erst kommen komische Zeichen, dann ein Lade...., dann sehe ich für nen gaaaaanz kurzen Augenblick ein Bild (sieht nach dem Image Bild für den Boot-Vorgang aus.)
Hier ein Ausschnitt des Logs (Dieser wiederhohlt sich ständig):

Code: Alles auswählen

jdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
NIP: 00000008 XER: 8000767F LR: 0000000A REGS: ff002ea0 TRAP: 1000 DAR: 00342AC5
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 0000000A FF002F90 00000000 00000000 00000000 0000000A 00060458 00002580 
GPR08: FF0009C0 00000000 FF0009C0 0000001B 533FFF3F 00031BFC 00067400 00110180 
GPR16: 58800083 40444240 04010200 04002040 2000C000 00000001 1C908004 80C24041 
GPR24: C0528159 0002C6CC 00026240 00030000 00061368 FF002FC0 00000000 0005A7C0 
Call backtrace: 
Software Emulation Exception

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, itest	- return true/false on integer compare
, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
*** ERROR: `ethaddr' not set
*** ERROR: `serverip' not set
can't find logo
*** ERROR: `ethaddr' not set
*** ERROR: `serverip' not set
can't find logo

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
*** ERROR: `serverip' not set
*** ERROR: `serverip' not set
............... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
u-boot: Bad Magic Number *** THIS IS NOT THE FAMOUS dbox2 'Bad Magic' ***
=> 
-------------------------------------------------------------
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Broadcom NetXtreme 57xx-Gigabit-Controller (1)
IP-Adresse des Netzwerkadapters: 192.168.5.3
IP-Adresse die die dbox bekommt: 192.168.5.202
Betriebssystem: Professional Service Pack 1 (Build 7601)
CPU 1: Intel(R) Pentium(R) D CPU 2.80GHz @ 2793 MHz
Dateiname des Images: Keywelt_V1.20_2011-08-11_2x_UM_camd3_cccam.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.4
------ Powered by http://www.dboxservice-hallenberg.de ------
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 174720
verify sig: 262
Branching to 0x40100


U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

CPU:   PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, 
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, itest	- return true/false on integer compare
, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
*** ERROR: `ethaddr' not set
*** ERROR: `serverip' not set
can't find logo
*** ERROR: `ethaddr' not set
*** ERROR: `serverip' not set
can't find logo

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
*** ERROR: `serverip' not set
*** ERROR: `serverip' not set
............................................................... done
Kann mir jemand helfen? Leider habe ich keine Ahnung von den Logs. Ich hoffe, dass es kein Hardwarefehler ist.
Einen Reset habe ich schon gemacht. Ebenfalls habe ich probiert die dbox erneut in den debug-mode zu bekommen. Sie endet in einer Endlosschleife. Sie startet ständig neu. Wäre super, wenn mir hier jemand helfen könnte :)
Vielen Dank im Voraus :)

Gruß, Batti
dbt
Administrator
Beiträge: 2675
Registriert: Donnerstag 28. September 2006, 19:18
Kontaktdaten:

Re: Nokia dbox2 startet immer neu

Beitrag von dbt »

Das Image ist wohl zu verbastelt. Keine Ahnung was da passiert:

Code: Alles auswählen

*** ERROR: `serverip' not set
*** ERROR: `serverip' not set
Versuchs bitte mit einem Original-Image, dann melde dich nochmal!
batti
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Samstag 24. September 2011, 19:00

Re: Nokia dbox2 startet immer neu

Beitrag von batti »

Hi,

erstmal vielen Dank für die schnelle Antwort.
Ich habe jetzt das Image "JtG_Neutrino_2x_v2.4.2-Final (15.07.2011 - 18:42)" genommen und probiert mit Hallenberg zu flashen. Dabei erhalte ich folgenden Log (Leider auch die Zeilen, auf die du mich gerade aufmerksam gemacht hast).

Code: Alles auswählen

jdebug: @debug: DDF: 67.79 BogoMIPS
Board_EventWait: timed out
debug: WARNING: unsupported FP ID 0x0
debug: write to 0x22/0x05 failed, rc -22

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID http://Hallenberg.com  46
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>  boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.3, My IP 192.168.5.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, itest	- return true/false on integer compare
, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
*** ERROR: `ethaddr' not set
*** ERROR: `serverip' not set
can't find logo
*** ERROR: `ethaddr' not set
*** ERROR: `serverip' not set
can't find logo

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
*** ERROR: `serverip' not set
*** ERROR: `serverip' not set
. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
u-boot: Bad Magic Number *** THIS IS NOT THE FAMOUS dbox2 'Bad Magic' ***
=> 
-------------------------------------------------------------
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C44753B erhalten
BootP: ARP-Eintrag mit IP: 192.168.5.202 und Mac: 00509C44753B gesetzt
BootP: Antwort an 00509C44753B gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Broadcom NetXtreme 57xx-Gigabit-Controller (1)
IP-Adresse des Netzwerkadapters: 192.168.5.3
IP-Adresse die die dbox bekommt: 192.168.5.202
Betriebssystem: Professional Service Pack 1 (Build 7601)
CPU 1: Intel(R) Pentium(R) D CPU 2.80GHz @ 2793 MHz
Dateiname des Images: JtG_Neutrino_Komplett_2x__v2.4.2.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.4
------ Powered by http://www.dboxservice-hallenberg.de ------
Nochmals Danke im Voraus :-)

Gruß, Batti
rhabarber1848
CDK-Experte
Beiträge: 4335
Registriert: Donnerstag 3. April 2008, 14:05

Re: Nokia dbox2 startet immer neu

Beitrag von rhabarber1848 »

batti hat geschrieben:debug: WARNING: unsupported FP ID 0x0
Könnte auch ein Hardwareproblem sein:
http://www.tuxbox-cvs.sourceforge.net/f ... =6&t=39013
batti
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Samstag 24. September 2011, 19:00

Re: Nokia dbox2 startet immer neu

Beitrag von batti »

Hi rhabarber1848,

ich hatte die dbox2 heute schon für ein paar Stunden ausgesteckt. Leider auch kein Erfolg. Ich lasse Sie einfach nochmal bis morgen ausgesteckt.
Vielen Dank für deine Antwort.
Ich hoffe ja einfach, dass nicht der RAM oder CPU o.Ä. kaputt ist. :-)
Erkennt sonst jemand noch was anhand des Logs?

Gruß, Batti
rhabarber1848
CDK-Experte
Beiträge: 4335
Registriert: Donnerstag 3. April 2008, 14:05

Re: Nokia dbox2 startet immer neu

Beitrag von rhabarber1848 »

Poste bitte ein Bootlog der Box ohne den Hallenberg Imageflashingassistenten,
Du kannst dafür z.B. Putty nehmen und dort eine serielle Verbindung aufbauen.

Mach bitte zusätzlich einen RAM-Selbsttest der dBox und poste das Ergebnis:
http://www.tuxbox-cvs.sourceforge.net/f ... 94#p264694
batti
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Samstag 24. September 2011, 19:00

Re: Nokia dbox2 startet immer neu

Beitrag von batti »

Hallo rhabarber1848,

Danke für die schnelle Antwort. :-)

einmal von Putty (dieser Log wiederholt sich ständig, da die dbox2 ja immer neu startet):

Code: Alles auswählen

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 174720
verify sig: 262
Branching to 0x40100


U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

CPU:   PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2,
              debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID XXX
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 174720
verify sig: 262
Branching to 0x40100


U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2,
              debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID XXX
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 174720
verify sig: 262
Branching to 0x40100


U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

CPU:   PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2,
              debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID XXX
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 174720
verify sig: 262
Branching to 0x40100
Und hier einmal vom Selbsttest:

Code: Alles auswählen

U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

jdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID XXX
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
Gruß, batti
JtG-Riker
Image-Team
Beiträge: 1015
Registriert: Freitag 7. Februar 2003, 18:37
Kontaktdaten:

Re: Nokia dbox2 startet immer neu

Beitrag von JtG-Riker »

Ram oder CPU defekt, Ram kannst du teilweise testen, dazu mal die Box mit Pfeil nach oben gedrückt starten und die Ausgabe vom Log posten.

Gruß Riker
batti
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Samstag 24. September 2011, 19:00

Re: Nokia dbox2 startet immer neu

Beitrag von batti »

Hi JtG-Riker,

vielen Dank für deine Antwort, auch wenn es genau das ist, was ich nicht gehofft habe :lol:
leider bekomme ich da nicht mehr als in meinem vorigen Post unter Selbsttest. Ist das nicht der RAM-Test? Hier noch einmal der Log:

Code: Alles auswählen

U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

jdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID XXX
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
JtG-Riker
Image-Team
Beiträge: 1015
Registriert: Freitag 7. Februar 2003, 18:37
Kontaktdaten:

Re: Nokia dbox2 startet immer neu

Beitrag von JtG-Riker »

Hups, ist zu spät, ja ram sieht okay aus, wobei der Test auch nicht immer richtig liegt.

Ich würde dann eher auf defekte CPU tippen.

Gruß Riker
batti
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Samstag 24. September 2011, 19:00

Re: Nokia dbox2 startet immer neu

Beitrag von batti »

Ok, danke. Dann muss wohl eine neue her.
Gruß, batti
JtG-Riker
Image-Team
Beiträge: 1015
Registriert: Freitag 7. Februar 2003, 18:37
Kontaktdaten:

Re: Nokia dbox2 startet immer neu

Beitrag von JtG-Riker »

batti hat geschrieben:Ok, danke. Dann muss wohl eine neue her.
Gruß, batti
Könnte auch der Netzwerk-IC sein aber ist immer schwierig aus der Ferne da was zu deuten wenn man die Box nicht da vor einem hat.

Gruß Riker
batti
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Samstag 24. September 2011, 19:00

Re: Nokia dbox2 startet immer neu

Beitrag von batti »

Klar, verstehe ich. Ich hab die Möglichkeit günstig eine andere dbox2 zu kaufen. Ich werde dann wohl eh die möglichkeit wählen.
Danke dir:-)
Gruß, batti
Antworten