Nokia 2xIntel Bootschleife

Domestos & Derivate
Antworten
johnnyG60
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Dienstag 15. November 2011, 22:47

Nokia 2xIntel Bootschleife

Beitrag von johnnyG60 »

Hallo zusammen,

Ich habe hier eine Nokia mit 2x Intel die in einer Bootschleife hängt. Weiß jemand warum sie nicht weiter bootet?

Hier der Log:

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID xxx
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 178724
verify sig: 262
Branching to 0x40100


U-Boot 2011.09 (Tuxbox) (Nov 06 2011 - 07:22:48)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MiB
Flash: 8 MiB
Scanning JFFS2 FS: . done.
find_inode failed for name=boot.conf
load: Failed to find inode
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC
LCD:   ready

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 665617 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
   Image Name:   Linux-2.4.37.11-dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    665553 Bytes = 650 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.37.11-dbox2 (dietmarw@lalelu.li) (gcc version 3.4.6) #2 Sun No
v 6 07:23:09 CET 2011
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30840k available (1132k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:97:8d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00580000 : "root (squashfs+lzma)"
0x00580000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.18.5 (2011-11-06 07:25:05 CET)
starting pid 8, tty '': '/etc/init.d/sysinit'
[BOOT] running /etc/init.d/sysinit
Thu Jan  1 01:00:00 UTC 1970
starting pid 22, tty '': '/etc/init.d/rcS'

Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

[BOOT] running /etc/init.d/S05drivers
tuxbox: no IDE-Interface detected
Detected STB:
        Vendor: Nokia
        Model: D-BOX2  (2 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $
cam: no firmware file found
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS [b][<- Hier fängt der Spaß von vorn an][/b]
debug: LCD init error -1
debug: WATCHDOG RESET
debug: BMon V1.2  mID 01
.... usw.

Hier der Speichertest:

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     xxx
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
dbox2:root>
Habe auch schon ein Image ohne Netzwerk, nur mit Nullmodem auf die Box geflasht, hat aber nichts gebracht...
rhabarber1848
CDK-Experte
Beiträge: 4335
Registriert: Donnerstag 3. April 2008, 14:05

Re: Nokia 2xIntel Bootschleife

Beitrag von rhabarber1848 »

johnnyG60
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Dienstag 15. November 2011, 22:47

Re: Nokia 2xIntel Bootschleife

Beitrag von johnnyG60 »

Naja, mit einem anderen, nicht ganz so legalem Image kommt das
debug: LCD init error -1
nicht.

Gibt es sowas wie ein Test-Image?

btw: Bist Du der rhabarber1848, den ich in meiner heilen Box im Bootlog sehe?
$Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $
doc
Contributor
Beiträge: 1623
Registriert: Donnerstag 10. Januar 2002, 20:03

Re: Nokia 2xIntel Bootschleife

Beitrag von doc »

Diese Debugmeldungen kommen vom BMon und nicht aus dem Image, daher ist es an der Stelle egal welches Image Du auf der Box hast. :wink:

Und wenn diese Meldung auch nur einmal kommt ist da was nicht ganz sauber.
johnnyG60
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Dienstag 15. November 2011, 22:47

Re: Nokia 2xIntel Bootschleife

Beitrag von johnnyG60 »

Wie würdet ihr weiter suchen? Lohnt es mal Betanova zu flashen?
doc
Contributor
Beiträge: 1623
Registriert: Donnerstag 10. Januar 2002, 20:03

Re: Nokia 2xIntel Bootschleife

Beitrag von doc »

Nun ja, bei dem großen Online Auktionshaus z.B. :wink:
weil
doc hat geschrieben:Diese Debugmeldungen kommen vom BMon und nicht aus dem Image, daher ist es an der Stelle egal welches Image Du auf der Box hast. :wink:

Und wenn diese Meldung auch nur einmal kommt ist da was nicht ganz sauber.
Antworten