Ohne eigene ucode.bin keine Kanalsuche mit Soft vom 15.04.

[Warromat]

HI!

In der neuen Version ist ja nen neuer Treiber für den Prozzi der DBox gleich dabei (ucode).
Also meine Philips wollte ohne die alte ucode.bin keinen Kanalscan machen. Nach ein paar sek. und ohne auch nur einen Transponder durchsucht zu haben, bricht er mit
"Kanalsuche erfolgreich" ab, hat aber Keine gefunden.
Mit alter ucode funktioniert es aber gut!

MFG

Warromat

[Toerli]

hm... da der eingebundene ucode ein ucode 0.14 is könnt ich mir vorstellen das da automatisch hw_sections aktiviert wird..
und diese gehen auf enx nicht.....
Häng mal bitte nen Bootlog an da sieht man das

[Regloh]

ich habe die ucode_0014 schon auf der box im dauertest, seit die anleitung im forum aufgetaucht ist. die laufen. das hw-section enabled bekomme ich nicht.

aber zur kanalsuche. ich hatte das prob auch.
1. versuch (telekom/ish) - nix
2. versuch (cable-bf) - nach >20 min abgebrochen - nix
3. versuch (telekom/ish) - alles fix gefunden

Regloh

[Warromat]

So, habe jetzt mal mit dem eingebauten ucode nen bootlog gemacht:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID **-**.**.**.**.**.**-**
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635882 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635818 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Apr 13 14:33:10 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247125000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2a:b5:6a
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 9, console /dev/console: '/etc/init.d/rcS') multi-ca
Using /lib/modules/2.4.20-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.o
ifup: Ignoring unknown interface net
ifup: Ignoring unknown interface loopback
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.20-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.20-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.2 2003/04/14 14:11:33 alexw Exp $
avia_gt_dmx: Unable to load firmware file '/var/tuxbox/ucodes/ucode.bin'
avia_gt_dmx: Successfully loaded ucode V0.14
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.3 2003/04/10 14:54:22 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.20-dbox2/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.5 2003/03/05 09:00:31 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.2.1 2003/03/13 15:11:22 alexW Exp $lcd.o: init lc
d driver module
lcd.o: found KS0713/SED153X lcd interface on 2


$Id: sectionsd.cpp,v 1.166 2003/03/14 04:27:55 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.18 2003/03/27 11:04:52 thegoodguy Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.104 2003/03/19 20:59:02 thegoodguy Exp $

[controld] Boxtype detected: (2)
set event: 00000009
[controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.433 2003/04/01 17:30:24 thegoodguy E
xp $

[neutrino] frameBuffer Instance created
[basicsocket] send_data: Resource temporarily unavailable
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[basicsocket] send_data: Resource temporarily unavailable
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[controld] setting VideoFormat to auto
video notify: videomenu.videoformat
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[CFrontend::getEvent] FE_FAILURE_EV
zap failed!

Hatte natürlich keine Antenne dran, weil das Kabel zu kurz ist. Poste gleich nochmal bootlog mit eigener ucode!

MFG

Warromat

[Warromat]

Und hier nochmal mit eigenem ucode:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID **-**.**.**.**.**.**-**
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635882 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635818 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Apr 13 14:33:10 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247125000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2a:b5:6a
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 9, console /dev/console: '/etc/init.d/rcS') multi-ca
Using /lib/modules/2.4.20-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.o
SIOCADDRT: Network is unreachable
ifup: Ignoring unknown interface net
ifup: Ignoring unknown interface loopback
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.20-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.20-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.2 2003/04/14 14:11:33 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.3 2003/04/10 14:54:22 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.20-dbox2/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.5 2003/03/05 09:00:31 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.2.1 2003/03/13 15:11:22 alexW Exp $lcd.o: init lc
d driver module
lcd.o: found KS0713/SED153X lcd interface on 2


$Id: sectionsd.cpp,v 1.166 2003/03/14 04:27:55 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] Unknown 1.CMD-Class 03
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.18 2003/03/27 11:04:52 thegoodguy Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.104 2003/03/19 20:59:02 thegoodguy Exp $

[controld] Boxtype detected: (2)
set event: 00000009
[controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.433 2003/04/01 17:30:24 thegoodguy E
xp $

[neutrino] frameBuffer Instance created
[basicsocket] send_data: Resource temporarily unavailable
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...[basicsocket] send_data: Resourc
e temporarily unavailable
OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[controld] setting VideoFormat to auto
video notify: videomenu.videoformat
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1880000
[neutrino] initialized everything
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!

Sonst wurde nichts geändert!

MFG

Warromat

[Warromat]

Hab nochmal geguckt!

Bei beiden Logs steht:
avia_gt_napi: hardware section filtering disabled

Wird der Kanalscan auch davon beeinflusst, ob die Konsole auf Null oder Seriell ist?
MMMhhhhh...
muesste ich mal probieren!

Antwort folgt!

MFG

Warromat

[Warromat]

Gerade nochmal bisl rumprobiert.

Ohne eigene ucode.bin geht net mal Fernsehgucken.
Kann kein Sender empfangen werden, obwohl vorher mit anderem ucode Kanalsuche gemacht wurde und Bouqets da sind.
Jeder Sender kann "zur Zeit nicht empfangen werden" und im Display ist der Sendername in Klammern.

Die neue ucode mag meine Philips wohl net!
Wenn ich irgendwas testen oder probieren soll, dann bitte bei mir melden!
Möchte gerne helfen!

MFG

Warromat

[Plutoman]

bei mir friert das Bild schon nach ein paar Sekunden ständig ein. (Standbild + Ton).

aktuelle Baseimage und cdk.cramfs vom 15 April 2003.

nach dem ich die ucodes.bin Datei wieder eingespielt hab, geht wieder alles einwandfrei.

Falls Logs benötigt werden bitte mit mir per PM in Verbindung setzten.
Weiß nicht genau mit welchen Programm ich diese erstellen soll.

mfg

Plutoman

P.S.

Sagem dbox2 (Sat) 1x Intel

[Zahni]

Welche Box ?

hw_sections scheint mit dem AlexW-Image nur bei GTX-Boxen zu gehen. Also keine Philips und wohl auch keine Sagems (?) . Ist wohl bei ENX z.Z. noch generell abgeschaltet.

-Zahni