habe eine Sagem mit 1xI für Kabel ,bei der log folgendermaßen aussieht:
debug: DDF: Calibrating delay loop... debug: DDF: 66.75 BogoMIPS
debug: BMon V1.2 mID 02
debug: feID 0debug: fpID 41 dsID 00-75.b6.64.06.0debug: HWrev 50 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /root.new/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
Der Flashvorgang wird mit diesem Fehler beendet:
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.100, My IP 192.168.1.5
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x70, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x30
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-4T-8b-29-1d-42
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.100; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x02T00T
Loading: ##
LCD logo at: 0x130000 (0x0E8FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.100; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x01T00T
Loading: #########
FB logo at: 0x0 (0x0EB000 AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /D/Dbox/7Image/AlexW/1x/alexW1xBaseimageV1.6.9.img
BOOTP broadcast 1
TFTP from server 192.168.1.100; our IP address is 192.168.1.5
Filename '/D/Dbox/7Image/AlexW/1x/alexW1xBaseimageV1.6.9.img'.
Load address: 0x120000
Loading: ##########
######################
dbox2-ppcboot> protect off 10020000 107fffff
Error: start and/or end address not on sector boundary
dbox2-ppcboot>
Auch kann man die Startmeldung auf dem Display nicht richtig lesen, ist zerstückelt.
Danke schon mal
