Hallo,
bei meiner philips dbox bleiben auf folgenden Kanälen immer das Bild/Ton hängen:
ARD, ZDF, Südwest3, bayern3, Phönix, WDR, MDR, ...
Andere Kanäle, wie z.B. Premiere, SAT1, RTL, etc. laufen ohne Probleme.
Woran kann das liegen?
Grüße
cox
Philips dBox2 und manche Kanäle bleiben hängen
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
a.) Deine Antenne ist falsch ausgerichtet
b.) Das Image hat das Verfallsdatum erreicht und ist schlecht geworden.
c.) jemand wackelt am Kabel
d.) dein LNB ist hinueber
e.) der Satellit taumelt
f.) ein paar mehr Infos, waeren hilfreich
ansonsten http://tuxbox.berlios.de/forum/viewtopic.php?t=15658
b.) Das Image hat das Verfallsdatum erreicht und ist schlecht geworden.
c.) jemand wackelt am Kabel
d.) dein LNB ist hinueber
e.) der Satellit taumelt
f.) ein paar mehr Infos, waeren hilfreich
ansonsten http://tuxbox.berlios.de/forum/viewtopic.php?t=15658
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
Ich habe das Problem (vielleicht) etwas eingekreist:
Folgende Kanäle gehen nicht (ich habs über die Frequenz gefunden):
Aus der datei Service.xml rauskopiert.
- <transponder id="044d" onid="0001" frequency="11836500" inversion="2" symbol_rate="27500000" fec_inner="3" polarization="0">
<channel service_id="6dca" name="Das Erste" service_type="01" />
<channel service_id="6dcb" name="Bayerisches FS" service_type="01" />
<channel service_id="6dcc" name="hessen fernsehen" service_type="01" />
<channel service_id="6dcd" name="arte" service_type="01" />
<channel service_id="6dce" name="SR Fernsehen Suedwest" service_type="01" />
<channel service_id="6dcf" name="WDR FERNSEHEN" service_type="01" />
<channel service_id="6dd0" name="BR-alpha" service_type="01" />
<channel service_id="6dd1" name="S⅛DWEST BW" service_type="01" />
<channel service_id="6dd2" name="Phoenix" service_type="01" />
<channel service_id="6dd8" name="Bayern 4 Klassik" service_type="02" />
<channel service_id="6dd9" name="B5 aktuell" service_type="02" />
<channel service_id="6dda" name="hr-skyline" service_type="02" />
<channel service_id="6ddb" name="hr2" service_type="02" />
<channel service_id="6ddc" name="hr-klassik" service_type="02" />
<channel service_id="6ddd" name="XXL" service_type="02" />
<channel service_id="6dde" name="Bayern 1" service_type="02" />
<channel service_id="6ddf" name="NDR Info" service_type="02" />
<channel service_id="6de0" name="NordwestRadio" service_type="02" />
<channel service_id="6de1" name="SR 1" service_type="02" />
<channel service_id="6de2" name="Test-R" service_type="01" />
- <transponder id="0437" onid="0001" frequency="11953500" inversion="2" symbol_rate="27500000" fec_inner="3" polarization="0">
<channel service_id="6d66" name="ZDF" service_type="01" />
<channel service_id="6d67" name="3sat" service_type="01" />
<channel service_id="6d68" name="KiKa" service_type="01" />
<channel service_id="6d69" name="Eurosport" service_type="01" />
<channel service_id="6d6a" name="CNBC" service_type="01" />
<channel service_id="6d6b" name="ZDFinfokanal" service_type="01" />
<channel service_id="6d6c" name="DLR-Berlin" service_type="02" />
<channel service_id="6d6d" name="DLF-Köln" service_type="02" />
<channel service_id="6d6e" name="ZDFdokukanal" service_type="01" />
<channel service_id="6d6f" name="EuroNews" service_type="01" />
<channel service_id="6d70" name="ZDFtheaterkanal" service_type="01" />
<channel service_id="6d71" name="Österreich 1" service_type="02" />
</transponder>
Komischerweise habe ich an meiner Satellitenanlage schon einen Digitalreceiver von Humx (BTCI-5900) und Hirschmann ohne Probleme am laufen gehabt. Und das dümmste ist noch, das die Box bei meinem Kollegen ohne Probleme läuft.
Kann es sein, dann diese beiden Frequenzen (11836500 und 11953500) irgendwie nicht richtig vom LNB (in entsprechender Qualität) gesendet werden ????
Folgende Kanäle gehen nicht (ich habs über die Frequenz gefunden):
Aus der datei Service.xml rauskopiert.
- <transponder id="044d" onid="0001" frequency="11836500" inversion="2" symbol_rate="27500000" fec_inner="3" polarization="0">
<channel service_id="6dca" name="Das Erste" service_type="01" />
<channel service_id="6dcb" name="Bayerisches FS" service_type="01" />
<channel service_id="6dcc" name="hessen fernsehen" service_type="01" />
<channel service_id="6dcd" name="arte" service_type="01" />
<channel service_id="6dce" name="SR Fernsehen Suedwest" service_type="01" />
<channel service_id="6dcf" name="WDR FERNSEHEN" service_type="01" />
<channel service_id="6dd0" name="BR-alpha" service_type="01" />
<channel service_id="6dd1" name="S⅛DWEST BW" service_type="01" />
<channel service_id="6dd2" name="Phoenix" service_type="01" />
<channel service_id="6dd8" name="Bayern 4 Klassik" service_type="02" />
<channel service_id="6dd9" name="B5 aktuell" service_type="02" />
<channel service_id="6dda" name="hr-skyline" service_type="02" />
<channel service_id="6ddb" name="hr2" service_type="02" />
<channel service_id="6ddc" name="hr-klassik" service_type="02" />
<channel service_id="6ddd" name="XXL" service_type="02" />
<channel service_id="6dde" name="Bayern 1" service_type="02" />
<channel service_id="6ddf" name="NDR Info" service_type="02" />
<channel service_id="6de0" name="NordwestRadio" service_type="02" />
<channel service_id="6de1" name="SR 1" service_type="02" />
<channel service_id="6de2" name="Test-R" service_type="01" />
- <transponder id="0437" onid="0001" frequency="11953500" inversion="2" symbol_rate="27500000" fec_inner="3" polarization="0">
<channel service_id="6d66" name="ZDF" service_type="01" />
<channel service_id="6d67" name="3sat" service_type="01" />
<channel service_id="6d68" name="KiKa" service_type="01" />
<channel service_id="6d69" name="Eurosport" service_type="01" />
<channel service_id="6d6a" name="CNBC" service_type="01" />
<channel service_id="6d6b" name="ZDFinfokanal" service_type="01" />
<channel service_id="6d6c" name="DLR-Berlin" service_type="02" />
<channel service_id="6d6d" name="DLF-Köln" service_type="02" />
<channel service_id="6d6e" name="ZDFdokukanal" service_type="01" />
<channel service_id="6d6f" name="EuroNews" service_type="01" />
<channel service_id="6d70" name="ZDFtheaterkanal" service_type="01" />
<channel service_id="6d71" name="Österreich 1" service_type="02" />
</transponder>
Komischerweise habe ich an meiner Satellitenanlage schon einen Digitalreceiver von Humx (BTCI-5900) und Hirschmann ohne Probleme am laufen gehabt. Und das dümmste ist noch, das die Box bei meinem Kollegen ohne Probleme läuft.
Kann es sein, dann diese beiden Frequenzen (11836500 und 11953500) irgendwie nicht richtig vom LNB (in entsprechender Qualität) gesendet werden ????
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
Nicht direkt. Ich komme leider nicht mit einem Seriellen kabel vom PC an die dBox (ca. 10 m entfernt).
Das Image ist 1.6.10 vom 22.07.2003. Ich habe die Box bei m. seiler auf Linux umstellen lassen (http://www.neutrino-anleitung.de)
Über dich Suchfunktion im Forum finde ich nur Ãllgemeine Informationen zu Problemen mit Philips-dBoxen.
Das Problem mit den Bildhängern hatte ich vorher schon mit dem alten Betriebssystem (aber da bei allen Programmen).
Das war auch der Grund für Linux + Reaparatur (Der RAM vom Avia sowie der TDA war defekt, lt. Info von M. Seiler).
Da ich technisch absolut keine Ahnung von diesen Dingen habe und trotzdem diese Box nicht aufgeben will, bin ich eben noch auf der Suche nach Hinweisen.
Also, falls ich noch Hinweise / Problembeschreibungen geben kann, dann bitte melden.
Vielen Dank !!!!
cox
Das Image ist 1.6.10 vom 22.07.2003. Ich habe die Box bei m. seiler auf Linux umstellen lassen (http://www.neutrino-anleitung.de)
Über dich Suchfunktion im Forum finde ich nur Ãllgemeine Informationen zu Problemen mit Philips-dBoxen.
Das Problem mit den Bildhängern hatte ich vorher schon mit dem alten Betriebssystem (aber da bei allen Programmen).
Das war auch der Grund für Linux + Reaparatur (Der RAM vom Avia sowie der TDA war defekt, lt. Info von M. Seiler).
Da ich technisch absolut keine Ahnung von diesen Dingen habe und trotzdem diese Box nicht aufgeben will, bin ich eben noch auf der Suche nach Hinweisen.
Also, falls ich noch Hinweise / Problembeschreibungen geben kann, dann bitte melden.
Vielen Dank !!!!
cox
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
Hier das Bootlog file: Die dBox war aber nicht an der Sat-Schüssel !!!
þdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-af.45.cb.07.00.00-a9
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Phillips
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Ich hoffe Du kannst damit was anfangen !!
Gruß
cox
þdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-af.45.cb.07.00.00-a9
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Phillips
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
. FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Ich hoffe Du kannst damit was anfangen !!
Gruß
cox
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
Jetzt mit dem dbox bootmanager gings:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-af.45.cb.07.00.00-a9
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Phillips
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ..
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.21-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Jul 6 12:22:55 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30804k available (1128k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2b:51:e2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
1-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.21-dbox2/misc/info.o
Using /lib/modules/2.4.21-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.21-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.21-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).
Using /lib/modules/2.4.21-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.21-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.21-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.21-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.21-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
Using /lib/modules/2.4.21-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
write 1 event's ...
write 1 event's ...
CAM: attached to adapter
Using /lib/modules/2.4.21-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.21-dbox2/misc/dvb_frontend.o
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.21-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.2 2003/07/22 08:01:56 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.5 2003/06/04 11:04:45 alexw Exp $
avia_gt_dmx: No firmware found at /var/tuxbox/ucodes/ucode.bin, using compiled-i
n version.
avia_gt_dmx: Successfully loaded ucode V0.14
ENX-INITed -> 0
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.4 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.21-dbox2/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.21-dbox2/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.6 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.4 2003/07/22 08:33:41 alexW Exp $
$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.50 2003/06/13 10:53:15 digi_casi Exp $
$Id: controld.cpp,v 1.107 2003/06/26 05:08:58 alexw Exp $
[controld] Boxtype detected: (2)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.477 2003/07/16 08:58:13 thegoodguy E
xp $
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[CFrontend::getEvent] FE_FAILURE_EV
zap failed!
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-af.45.cb.07.00.00-a9
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Phillips
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.21-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Jul 6 12:22:55 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30804k available (1128k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2b:51:e2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
1-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.21-dbox2/misc/info.o
Using /lib/modules/2.4.21-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.21-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.21-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).
Using /lib/modules/2.4.21-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.21-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.21-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.21-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.21-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
Using /lib/modules/2.4.21-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
write 1 event's ...
write 1 event's ...
CAM: attached to adapter
Using /lib/modules/2.4.21-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.21-dbox2/misc/dvb_frontend.o
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.21-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.2 2003/07/22 08:01:56 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.5 2003/06/04 11:04:45 alexw Exp $
avia_gt_dmx: No firmware found at /var/tuxbox/ucodes/ucode.bin, using compiled-i
n version.
avia_gt_dmx: Successfully loaded ucode V0.14
ENX-INITed -> 0
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.4 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.21-dbox2/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.21-dbox2/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.6 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.4 2003/07/22 08:33:41 alexW Exp $
$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.50 2003/06/13 10:53:15 digi_casi Exp $
$Id: controld.cpp,v 1.107 2003/06/26 05:08:58 alexw Exp $
[controld] Boxtype detected: (2)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.477 2003/07/16 08:58:13 thegoodguy E
xp $
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[CFrontend::getEvent] FE_FAILURE_EV
zap failed!
-
cox
- Neugieriger
- Beiträge: 8
- Registriert: Montag 4. August 2003, 20:00
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
Also, das log sieht soweit eigentlich OK aus.
Da ist also raten angesagt.
Du kannst es mal mit eigenen u-codes versuchen - obwohl das eigentlich nichts damit zu tun haben duerfte.
Alternativ, prufe mal nach, welche Programme es betrifft und vergleiche das mal mit der Transponderliste bzw. den Transponder-Frequenzen auf http://www.astra.de .
Ich gehe davon aus, dass irgendwas reinstoert, oder das Signal zu schwach ist. D.h., check mal die Verkabelung. (Abschirmung an den Steckern OK?. Keine alten oder billige Antennenkabel, Kabel nicht zu lang. Ist irgendwo ein Handy in der Naehe? etc.
Da ist also raten angesagt.
Du kannst es mal mit eigenen u-codes versuchen - obwohl das eigentlich nichts damit zu tun haben duerfte.
Alternativ, prufe mal nach, welche Programme es betrifft und vergleiche das mal mit der Transponderliste bzw. den Transponder-Frequenzen auf http://www.astra.de .
Ich gehe davon aus, dass irgendwas reinstoert, oder das Signal zu schwach ist. D.h., check mal die Verkabelung. (Abschirmung an den Steckern OK?. Keine alten oder billige Antennenkabel, Kabel nicht zu lang. Ist irgendwo ein Handy in der Naehe? etc.