debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2d.96.93.07.00.00-f9
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.2
debug: Sending TFTP-request for file D/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2b-31-54
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial
Any key druecken um das Flashing abzubrechen.. : 0
dbox2-ppcboot> bootp 120000 /D/tftpboot/13.img
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.2
Filename '/D/tftpboot/13.img'.
Load address: 0x120000
Loading: #######################################################################
lo: 0x120000
dbox2-ppcboot> protect off 10020000 107fffff
unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors
dbox2-ppcboot>
das war es dann und es tut sich nichts mehr ....woran kanns liegen ??