kein TV-Bild aber die Kanäle werden gefunden...

Beitrag von Z » Freitag 18. Juni 2004, 20:36

Hi!

Ich habe meine dbox seit 2 Stunden, habe sie bei ebay ersteigert. Wahrscheinlich kapier ich das Prinzip noch nicht, jedenfalls kann ich eine menge Kanäle scannen und die werden im Bouquets irgendwie geordnet, aber ich bekomme einfach kein einziges Bild wenn ich ein Kanal auswähle. Aktuelles Programm und so weiter werden angezeigt.

Ich dachte, dass freie Kanäle eigenltich sofort auftauchen müssten?

Ansonsten scheint die Box zu laufen, IP, telnet und Neutrino-Web-server uvw. laufen.

Wahrscheinlich liegt es entweder an diesen komischen ucodes oder an der Karte ide ich mitbekommen habe.

Aber braucht man überhaupt eine Karte um freie Kanäle zu empfangen?

Der Avia 600 Ucode sagt mit unknown, das ist wahrscheinlich nicht so prikelnd... Ucode meldet den original? Ucode ucode_0014, Cam-Alpha wofür der auch immer ist, hat die Version cam_01_01_005D.

Wahrscheinlich ist alles hinten und vorne kaputt und alt oder was sagt ihr, ich habe wie gesagt nur etwa 2 Stunden erfahrung und konnte nichtmal herrausfinden wie ich mit die neuste Neutrino-Version besorgen und aufspielen kann...

Vielleicht ist ja jemand so nett mir ein paar Tipps zu geben wie ich mich am besten mit dem Teil schlagen soll...

Neutrino sagt mir:

NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $

Meine dmesg Ausgabe sieht so aus:

Linux version 2.4.19 (tuxbox@linux) (gcc version 3.2) #1 Die Sep 3 21:32:44 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30928k available (1016k kernel code, 360k data, 64k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-proc.o version 2.6.1 (20010825)
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:3b:51:90
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
0: offset=0x0,size=0x20000,blocks=64
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k init
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03 feID: 00 fpID: 52 enxID: 03 gtxID: ffffffff hwREV: 41 fpREV: 23
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.21 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 neBox Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.106 2002/09/04 14:26:49 Jolt Exp $
avia_gt_dmx: Successfully loaded ucode V0.14
avia_gt_dmx: RISC mem map size: 2048
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.17 2002/08/22 13:39:33 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
$Id: at76c651.c,v 1.31 2002/09/09 18:45:53 obi Exp $
i2c-core.o: driver AT76C651 DVB-C Demodulator registered.
i2c-core.o: client [AT76C651] registered to adapter [](pos. 4).
i2c-core.o: driver DAT7021 driver registered.
i2c-core.o: client [DAT7021] registered to adapter [](pos. 5).
avia_gt_napi: $Id: avia_gt_napi.c,v 1.103 2002/09/04 13:25:01 neBox Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $
avia_gt_proc: $Id: avia_gt_proc.c,v by neBox 2002/09/28 23:08:00
set event: 00000009
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)

[/quote]

Beitrag von **mogway** » Freitag 18. Juni 2004, 20:52

Mach mal ein komplettes Bootlog.
http://forum.tuxbox-cvs.sourceforge.net ... hp?t=15918

Gruss
mogway

Beitrag von Z » Freitag 18. Juni 2004, 21:37

Die sieht so aus:

(die 12 TV Channels sind nicht alle, nur habe ich beim rumspielen die anderen gelöscht, ich scanne so um die 80).

Würde ein aufspielen der org. BN-Software helfen?

Please stand by while rebooting the system.
Restarting systÃ¥?debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIP
S
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-f6.b9.56.07.00.00-ea
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 582785 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 582721 Bytes = 569 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (tuxbox@linux) (gcc version 3.2) #1 Die Sep 3 21:32:44 CEST
2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30928k available (1016k kernel code, 360k data, 64k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
i2c-proc.o version 2.6.1 (20010825)
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:3b:51:90
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k init
init started: BusyBox v0.61.pre (2002.08.18-11:52+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.21 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 neBox Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.106 2002/09/04 14:26:49 Jolt Exp $
avia_gt_dmx: Successfully loaded ucode V0.14
avia_gt_dmx: RISC mem map size: 2048
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.17 2002/08/22 13:39:33 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init AT76C651
$Id: at76c651.c,v 1.31 2002/09/09 18:45:53 obi Exp $
i2c-core.o: driver AT76C651 DVB-C Demodulator registered.
i2c-core.o: client [AT76C651] registered to adapter [](pos. 4).
i2c-core.o: driver DAT7021 driver registered.
i2c-core.o: client [DAT7021] registered to adapter [](pos. 5).
avia_gt_napi: $Id: avia_gt_napi.c,v 1.103 2002/09/04 13:25:01 neBox Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $
avia_gt_proc: $Id: avia_gt_proc.c,v by neBox 2002/09/28 23:08:00
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

[TIMERD]IDS: 0
$Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] 1.CMD-Class 0xE0
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1722
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $

[getservices.cpp] going to parse cable UEWU Mediend.
[zapit] LoadServices: success
[zapit] reading Bouquets .
[zapit] Found 1 bouquets.
[zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 12, Radio Channel
s #: 1.
[zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 12, Radio Chann
els #: 1.
[zapit] channels have been loaded succesfully
95: Killed
Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $

[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $

[controld] Boxtype detected: (03, 3, 2, Sagem)
set event: 00000009
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $

[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[camd] no card is in slot #2
[camd] a card is in slot #1
IP : 192.168.0.10
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway : 192.168.0.25
CVCRControl registered new serverdevice: 0 ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
scandir: No such file or directory
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::setFrontend] freq 402000
[CPlugins] Dir: /lib/tuxbox/plugins/
[CFrontend::getEvent] FE_COMPLETION_EV: freq 402000
[pmt.cpp] decriptor_tag (a): 0a
avia_gt_dmx: reloading stc

gbox version v0.75 (Beta version)
[CPlugins] 17 plugins found...
Debug level ECM:01 EMM:01 update:01 Log:00
Loading data
File not found
*ECM: CA ID: 0x1800 ( (Kudelski SA)) -
> CA PID: 0x04E5
*ECM: CA ID: 0x0B00 (Conax (Norwegian Telekom)) -> CA PID:
0x04E6
**** hashTableECM 2 elements ****
**** hashTableEMM 0 elements ****

Beitrag von **DieMade** » Freitag 18. Juni 2004, 21:40

Schmeiß den Emu runter und flash was anständiges.

Beitrag von Z » Freitag 18. Juni 2004, 22:49

Ok sieht schon etwas besser aus

Habe mir jetzt das yadi image raufgeflasht und ich empfange schon was, zwar zuwenig und es ruckelt und stottert aber das liegt wahrscheinlich an den ucodes oder an meiner TV-Leitung. Nach etwa 1min hört das stottern übrigens auf, allerdings werden es nicht mehr Kanäle...

Naja ich probier mal lustig weiter...

ciao