Habs jetzt getestet.
start_neutrino geändert, camd2 ausgetauscht.
Es kommen keine Meldungen.
Hab ich noch was vergessen

Gruß Nachtvogel
Read /disclaimer.txt and have fun with yadi on your Nokia D-BOX2 - Kernel 2.4.27
-dbox2 (13:20:56)...
dbox login: root
BusyBox v1.00 (2004.11.16-11:00+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # ps x
PID Uid VmSize Stat Command
1 root 440 S init
2 root SW [keventd]
3 root SWN [ksoftirqd_CPU0]
4 root SW [kswapd]
5 root SW [bdflush]
6 root SW [kupdated]
7 root SW [mtdblockd]
12 root SWN [jffs2_gcd_mtd2]
46 root 556 S inetd
55 root SW [avia_av_wdt]
76 root 508 S /sbin/lircd /var/tuxbox/config/lirc/lircd.conf
87 root SW [cifsoplockd]
91 root 488 S /bin/sh /etc/init.d/start
92 root 440 S init
93 root 440 S init
94 root 440 S init
95 root 440 S init
97 root 440 S init
98 root 440 S init
104 root 472 S /bin/sh /var/etc/init.d/start_neutrino
105 root 496 S /bin/sh /var/tuxbox/config/tuxcal/reminder -n
113 root 336 S sleep 160
114 root 2776 S sectionsd
115 root 2776 S sectionsd
117 root 2776 S sectionsd
118 root 2776 S sectionsd
119 root 2776 S sectionsd
120 root 2776 S sectionsd
121 root 1124 S timerd
125 root 380 S /var/bin/camd2 gui_type=2
126 root 1124 S timerd
127 root 1124 S timerd
130 root SW [kdvb-fe-0:0]
135 root 1376 S zapit -u
137 root 1172 S controld
139 root 1172 S controld
140 root 1172 S controld
141 root 1216 S nhttpd
142 root 3108 S neutrino -u -f
143 root 3108 S neutrino -u -f
144 root 3108 S neutrino -u -f
145 root 380 S telnetd
146 root 604 S -sh
147 root 564 R ps x
/var #
Des besseren: Wenn die start_neutrino im JtG-Image in /var/tuxbox liegt, wie Jmittelst, der es eigentlich wissen könnte, behauptet, dann kann man sie auch ändern.Nachtvogel hat geschrieben:[...]Beim JtG Image kann man so viel ich weiss die start_neutrino nicht ändern.
Lasse mich aber auch gerne eines besseren belehrenl
bei den "wat gibbet den da allethannebamb(el) hat geschrieben:...(Yadi, JTG, ???? wat gibbet den da allet?)...
Code: Alles auswählen
[ -e /var/etc/.popupcamd2] && /var/plugins/camd2 gui_type=1 || camd2