yadd

hi bin gerade am probieren mit ner yadd,
das hat er gemacht

***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt (Microsoft's Packet Scheduler)
***MAC address: 00:00:B4:52:BC:94 Local IP: 192.168.0.2 (via Packet-Driver #1)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 432 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox3\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox3\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox3\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1204 blocks
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 432 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox3\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox3\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox3\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\dbox3\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1204 blocks
BootP> Answer sent!
1 - mountd: mount: path: C/dbox3/cdkroot/

und hier steht er jetzt seit ca. ner halber stunde, ist das normal der status nfs ist schon bei über 1,3 mio.

hab jetzt noch ma in den Com terminal geguckt das steht hier

Load address: 0x100000
Loading: #######################################################################
##################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 615928 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.3) #1 Wed Dec 26
01:58:14 CET 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.2:C/dbox3/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.2:C/dbox3/
cdkroot/
time_init: decrementer frequency = 247500000/60
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:2c:b0:3a
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.2, my address is 192.168.0.20
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.2
Looking up port of RPC 100005/2 on 192.168.0.2
VFS: Mounted root (nfs filesystem).
Warning: unable to mount devfs, err: -2
Freeing unused kernel memory: 68k init
Warning: unable to open an initial console.
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8

dieser Fehler kommt dann endlos, was mach ich falsch unter der suchfunktion finde ich nichts

jetzt krige ich sobald ich neutrino starte diese meldung

CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 3
CHCH [DEMUX] START 3
CHCH [DEMUX] STOP 4
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5

was soll das sein???

Beitrag von **ffbbo** » Mittwoch 20. Februar 2002, 17:13

Sieht so aus, als wäre "/dev" nicht vorhanden.

Die yadd.tar.gz bitte UNBEDINGT mit den Unix-Tools von der Feldtechseite entpacken!

habe ich gemacht (war am anfang das Problem), /dev ist da aber es steht nix drin

ist da normal was drinnen?