Hallo,
habe eine DBOX2 mit yadi image 2.1.0.0 und habe das Ding nun erfolgreich über W-Lan mit meinem ISDN-Router verbunden.
Tuxtxt und Tuxmail läuft super.
Aber ich bekomme cal und wetter nicht zum laufen. Die beiden Plugins
werden im Menü der "blauen Taste" angezeigt - aber beim OK-drücken
verschwindet das "blaue Menü" und es pasiert nicht.
Was mache ich falsch ??????????????
(die beiden .so habe ich mit chmod 755 aktiviert)
wer kann mir heeeeeeelfen ?????
Gruß Alexander :gruebel:
Anfägerprobleme mit TUXCAL und TUXWETTER
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
-
jmittelst
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
-
det-box
- Einsteiger
- Beiträge: 211
- Registriert: Samstag 24. Januar 2004, 18:11
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
-
jmittelst
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
wget -O /dev/null http://localhost/cgi-bin/startPlugin?name=PLUGIN.cfg wobei PLUGIN.cfg durch die korrekte Schreibweise (tuxcal liegt in /lib/tuxbox/plugins, Tuxwetter hast Du ja selbst nach /var/tuxbox/plugins installiert.
Wobei Dich das nicht wirklich weiter bringen wird. Mach lieber ein Log: http://wiki.tuxbox-cvs.sourceforge.net/Bootlog
cu
Jens
Wobei Dich das nicht wirklich weiter bringen wird. Mach lieber ein Log: http://wiki.tuxbox-cvs.sourceforge.net/Bootlog
cu
Jens
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
-
Gorcon
- Tuxboxer
- Beiträge: 5873
- Registriert: Samstag 23. Februar 2002, 22:46
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
-
Gorcon
- Tuxboxer
- Beiträge: 5873
- Registriert: Samstag 23. Februar 2002, 22:46
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
-
Gorcon
- Tuxboxer
- Beiträge: 5873
- Registriert: Samstag 23. Februar 2002, 22:46
-
jmittelst
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
da ist das log....
zdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 00-00.00.00.00.00.00-00
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 160684
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Mar 16 2005 - 20:36:54)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - \ |
.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 627248 bytes loaded to 0x100000
......................................................................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 627184 Bytes = 612.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Mi Mär 16 21:18:16 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30904k available (1068k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:9f:9f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.00 (2005.03.16-19:38+0000) multi-call b
Starting pid 10, console /dev/console: '/etc/init.d/rcS'
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.6 2005/02/08 22:30:05 mogway Exp $
Yadi Release vom 16.03.2005 19:53 - Image-Version 2.1.0.0
Networkcfg eth0: 192.168.0.80/255.255.255.0 gw 192.168.0.1
Startmode: Bootmenu - HWS:off
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 92, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. TuxMailD 1.11 started [30.09.1965 - 14:18:06]
TuxMailD <check 1 Account(s) every 60min with Logging in Single-Mode>
TuxMailD <Spamlist contains 5 Entries, Filter enabled>
TuxMailD <restore Mail-DB>
$Id: sectionsd.cpp,v 1.181 2005/03/08 13:39:08 metallica Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.370 2005/03/14 19:58:48 mws Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[controld] setting VideoFormat to auto
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 0 bit 7
[camd] starting onid 0001 sid 0022
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0022 status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 22.10.2005 16:20:02, tim: Sat Oct 22 16:20:02 2005
[timeThread] time(): 22.10.2005 16:20:12, tim: Sat Oct 22 16:20:12 2005
TuxMailD <Account 0: 000/000 Mail(s) for WEBDE>
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
/var/tuxbox/plugins/tuxcal.so: undefined symbol: floor[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
sh: /var/plugins/tuxwet/tuxwetter: Permission denied
[CPlugins] exec...
[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
/var/tuxbox/plugins/tuxcal.so: undefined symbol: floor[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
sh: /var/plugins/tuxwet/tuxwetter: Permission denied
[CPlugins] exec...
[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
TuxMail 1.10
TuxMail <Font "/share/fonts/pakenham.ttf" loaded>
TuxMail <no Status for Account 1>
TuxMail <no Status for Account 2>
TuxMail <no Status for Account 3>
TuxMail <no Status for Account 4>
TuxMail <no Status for Account 5>
TuxMail <no Status for Account 6>
TuxMail <no Status for Account 7>
TuxMail <no Status for Account 8>
TuxMail <no Status for Account 9>
TuxMail <Mailaddress "" invalid, not added to Spamlist>
TuxMailD <sleep>
TuxMailD <wakeup>
TuxMailD <Server Error>
TuxMailD <Account 0 skipped>
TuxMail <could not update Status for Account 1>
TuxMail <could not update Status for Account 2>
TuxMail <could not update Status for Account 3>
TuxMail <could not update Status for Account 4>
TuxMail <could not update Status for Account 5>
TuxMail <could not update Status for Account 6>
TuxMail <could not update Status for Account 7>
TuxMail <could not update Status for Account 8>
TuxMail <could not update Status for Account 9>
[CPlugins] exec...
[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
TuxMail 1.10
TuxMail <Font "/share/fonts/pakenham.ttf" loaded>
TuxMail <no Status for Account 1>
TuxMail <no Status for Account 2>
TuxMail <no Status for Account 3>
TuxMail <no Status for Account 4>
TuxMail <no Status for Account 5>
TuxMail <no Status for Account 6>
TuxMail <no Status for Account 7>
TuxMail <no Status for Account 8>
TuxMail <no Status for Account 9>
TuxMail <could not update Status for Account 1>
TuxMail <could not update Status for Account 2>
TuxMail <could not update Status for Account 3>
TuxMail <could not update Status for Account 4>
TuxMail <could not update Status for Account 5>
TuxMail <could not update Status for Account 6>
TuxMail <could not update Status for Account 7>
TuxMail <could not update Status for Account 8>
TuxMail <could not update Status for Account 9>
[CPlugins] exec...
testNw IP : 192.168.0.80
testNw Netmask : 255.255.255.0
testNw Broadcast: 192.168.0.255
testNw Gateway: 192.168.0.1
testNw Nameserver: 192.168.0.1
[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
/var/tuxbox/plugins/tuxcal.so: undefined symbol: floor[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
sh: /var/plugins/tuxwet/tuxwetter: Permission denied
[CPlugins] exec...
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 00-00.00.00.00.00.00-00
debug: HWrev X3 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 160684
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Mar 16 2005 - 20:36:54)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - \ |
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 627248 bytes loaded to 0x100000
......................................................................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 627184 Bytes = 612.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Mi Mär 16 21:18:16 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30904k available (1068k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:9f:9f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.00 (2005.03.16-19:38+0000) multi-call b
Starting pid 10, console /dev/console: '/etc/init.d/rcS'
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.6 2005/02/08 22:30:05 mogway Exp $
Yadi Release vom 16.03.2005 19:53 - Image-Version 2.1.0.0
Networkcfg eth0: 192.168.0.80/255.255.255.0 gw 192.168.0.1
Startmode: Bootmenu - HWS:off
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 92, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. TuxMailD 1.11 started [30.09.1965 - 14:18:06]
TuxMailD <check 1 Account(s) every 60min with Logging in Single-Mode>
TuxMailD <Spamlist contains 5 Entries, Filter enabled>
TuxMailD <restore Mail-DB>
$Id: sectionsd.cpp,v 1.181 2005/03/08 13:39:08 metallica Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.370 2005/03/14 19:58:48 mws Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[controld] setting VideoFormat to auto
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 0 bit 7
[camd] starting onid 0001 sid 0022
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0022 status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 22.10.2005 16:20:02, tim: Sat Oct 22 16:20:02 2005
[timeThread] time(): 22.10.2005 16:20:12, tim: Sat Oct 22 16:20:12 2005
TuxMailD <Account 0: 000/000 Mail(s) for WEBDE>
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
/var/tuxbox/plugins/tuxcal.so: undefined symbol: floor[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
sh: /var/plugins/tuxwet/tuxwetter: Permission denied
[CPlugins] exec
...[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
/var/tuxbox/plugins/tuxcal.so: undefined symbol: floor[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
sh: /var/plugins/tuxwet/tuxwetter: Permission denied
[CPlugins] exec
...[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
TuxMail 1.10
TuxMail <Font "/share/fonts/pakenham.ttf" loaded>
TuxMail <no Status for Account 1>
TuxMail <no Status for Account 2>
TuxMail <no Status for Account 3>
TuxMail <no Status for Account 4>
TuxMail <no Status for Account 5>
TuxMail <no Status for Account 6>
TuxMail <no Status for Account 7>
TuxMail <no Status for Account 8>
TuxMail <no Status for Account 9>
TuxMail <Mailaddress "" invalid, not added to Spamlist>
TuxMailD <sleep>
TuxMailD <wakeup>
TuxMailD <Server Error>
TuxMailD <Account 0 skipped>
TuxMail <could not update Status for Account 1>
TuxMail <could not update Status for Account 2>
TuxMail <could not update Status for Account 3>
TuxMail <could not update Status for Account 4>
TuxMail <could not update Status for Account 5>
TuxMail <could not update Status for Account 6>
TuxMail <could not update Status for Account 7>
TuxMail <could not update Status for Account 8>
TuxMail <could not update Status for Account 9>
[CPlugins] exec
...[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
TuxMail 1.10
TuxMail <Font "/share/fonts/pakenham.ttf" loaded>
TuxMail <no Status for Account 1>
TuxMail <no Status for Account 2>
TuxMail <no Status for Account 3>
TuxMail <no Status for Account 4>
TuxMail <no Status for Account 5>
TuxMail <no Status for Account 6>
TuxMail <no Status for Account 7>
TuxMail <no Status for Account 8>
TuxMail <no Status for Account 9>
TuxMail <could not update Status for Account 1>
TuxMail <could not update Status for Account 2>
TuxMail <could not update Status for Account 3>
TuxMail <could not update Status for Account 4>
TuxMail <could not update Status for Account 5>
TuxMail <could not update Status for Account 6>
TuxMail <could not update Status for Account 7>
TuxMail <could not update Status for Account 8>
TuxMail <could not update Status for Account 9>
[CPlugins] exec
...testNw IP : 192.168.0.80
testNw Netmask : 255.255.255.0
testNw Broadcast: 192.168.0.255
testNw Gateway: 192.168.0.1
testNw Nameserver: 192.168.0.1
[CPlugins] (id,val):(end_y,533)
[CPlugins] (id,val):(end_x,672)
[CPlugins] (id,val):(off_y,39)
[CPlugins] (id,val):(off_x,23)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
/var/tuxbox/plugins/tuxcal.so: undefined symbol: floor[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
sh: /var/plugins/tuxwet/tuxwetter: Permission denied
[CPlugins] exec
...-
jmittelst
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
-
DrStoned
- Tuxboxer
- Beiträge: 2614
- Registriert: Montag 20. Mai 2002, 10:49
- Image: JTG-Image [IDE] Version 2.4.4
- Image: (7025SS) Merlin
Hast Du der Datei tuxwetter ebenfalls Ausführrechte (755) vergeben? Diese Datei muß in /var/plugins/tuxwet/ liegen. Du mußt also in /var/plugins/ ein neue Verzeichnis namens tuxwet haben. In diesem müssen außerdem noch die Dateien tuxwetter.conf, convert.list, und bmps.tar.Z liegen. Optional liegt da noch swisstime, die dient dazu die Uhrzeit zu korrigieren, sie braucht ebenfalls Ausführrechte (755).
Greetz von DrStoned
Greetz von DrStoned
Greetz von DrStoned
-
alexalexalex
- Neugieriger
- Beiträge: 12
- Registriert: Donnerstag 11. August 2005, 10:37
-
Gorcon
- Tuxboxer
- Beiträge: 5873
- Registriert: Samstag 23. Februar 2002, 22:46
-
jmittelst
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
-
DrStoned
- Tuxboxer
- Beiträge: 2614
- Registriert: Montag 20. Mai 2002, 10:49
- Image: JTG-Image [IDE] Version 2.4.4
- Image: (7025SS) Merlin
Mit dem Download wird wohl keiner allein was anfangen, der sich nicht super auskennt. Nimm lieber die Version aus Dboxinfo http://www.dbox2.info/download.php?fileID=168 . Die ist wenigstens vollständig und mit readme.txt.
Wobei in der readme.txt nicht drinsteht daß tuxcal.so Ausführrechte (755) braucht.
Greetz von DrStoned
Wobei in der readme.txt nicht drinsteht daß tuxcal.so Ausführrechte (755) braucht.
Greetz von DrStoned
Greetz von DrStoned