ich versuche schon seid zwei Tagen mein selbstgebautes CDK über das Netzwerk zu booten, bekomme aber ständig:
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-6a.5a.1c.07.00.00-49
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: f debug: b debug: 65 debug: 78 debug: 61 debug
: 6d debug: 70 debug: 6c debug: 65 debug: 2e debug: 6f debug: 72 debug: 67 debug
:
debug: Got BOOTP reply from Server IP 192.168.0.2, My IP 192.168.0.61
debug: Sending TFTP-request for file /dbox2/dbox2/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 136132
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Nov 1 2005 - 10:50:21)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
DHCP client bound to address 192.168.0.61
Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.61
Filename '/dbox2/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.61
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
can't find logo
BOOTP broadcast 1
DHCP client bound to address 192.168.0.61
Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.61
Filename '/dbox2/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.61
Filename 'logo-fb'.
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
can't find logo
Options:
1: console on ttyS0
2: console on fb0
3: console on null
Select option (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
DHCP client bound to address 192.168.0.61
Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.61
Filename '/dbox2/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.61
Filename '/dbox2/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #################################################################
###############################################################
done
Bytes transferred = 652748 (9f5cc hex)
..............................................................
Un-Protected 62 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 652684 Bytes = 637.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (root@Multitainer) (gcc version 3.4.4) #2 Di Nov 1 10
:50:42 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.2:/dbox2/dbox2/cdkroot,v
3 ip=192.168.0.61:192.168.0.2::255.255.255.0:::off console=ttyS0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30828k available (1108k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:40:ff:bd
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (Cramfs)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Cannot open root device "nfs" or 00:ff
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 00:ff
<0>Rebooting in 180 seconds..Mein /etc/dhcp3/dhcpd.conf sieht folgendermassen aus:
Code: Alles auswählen
host dbox2 {
hardware ethernet ##:##:##:##:##:##;
fixed-address 192.168.0.61;
next-server 192.168.0.2;
if exists vendor-class-identifier {
filename "/dbox2/dbox2/tftpboot/kernel-cdk";
option root-path "/dbox2/dbox2/cdkroot,v3";
} else {
filename "/dbox2/dbox2/tftpboot/u-boot";
}}
