Hallo habe fertig, nichts geht mehr
Wollte flaschenaber bootmanager nimmt keinen befehl wie z.b reset oder
go 10000100.
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-6b.e7.3c.07.00.00-ad
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 153668
verify sig: 262
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Dec 28 2005 - 01:56:29)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... .
find_inode failed for name=tuxbox
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash
find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 666402 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 666338 Bytes = 650.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (image@tower) (gcc version 3.4.4) #2 Mi Dez 28 02:33:
07 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:22:47
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.01 (2005.12.28-01:21+0000) multi-call bEep. Child "saa
" (ino #78) of dir ino #3 doesn't exist!
Eep. Child "lcdip" (ino #54) of dir ino #3 doesn't exist!
Eep. Child "lufsd" (ino #58) of dir ino #3 doesn't exist!
Eep. Child "rcsim" (ino #74) of dir ino #3 doesn't exist!
Eep. Child "zapit" (ino #108) of dir ino #3 doesn't exist!
Eep. Child "aviafbtool" (ino #20) of dir ino #3 doesn't exist!
Eep. Child "fbclear" (ino #41) of dir ino #3 doesn't exist!
Eep. Child "audioplay" (ino #18) of dir ino #3 doesn't exist!
Eep. Child "tuxmaild" (ino #97) of dir ino #3 doesn't exist!
Eep. Child "lcddump" (ino #53) of dir ino #3 doesn't exist!
Eep. Child "sectionsdcontrol" (ino #81) of dir ino #3 doesn't exist!
Eep. Child "lufsmnt" (ino #59) of dir ino #3 doesn't exist!
Eep. Child "switch" (ino #86) of dir ino #3 doesn't exist!
Eep. Child "aviaext" (ino #19) of dir ino #3 doesn't exist!
Eep. Child "resolv.conf" (ino #127) of dir ino #5 doesn't exist!
Eep. Child "timerd.conf" (ino #1116) of dir ino #710 doesn't exist!
Eep. Child "audioPIDs.data" (ino #1167) of dir ino #721 doesn't exist!
Eep. Child "prem_epg" (ino #1162) of dir ino #236 doesn't exist!
Eep. Child "rcS" (ino #134) of dir ino #118 doesn't exist!
Eep. Child "start" (ino #135) of dir ino #118 doesn't exist!
Eep. Child "start_neutrino" (ino #139) of dir ino #118 doesn't exist!
Eep. Child "interfaces" (ino #142) of dir ino #122 doesn't exist!
Inode #701 was a directory with children - removing those too...
Inode #702 was a directory with children - removing those too...
Inode #710 was a directory with children - removing those too...
Cannot remove child "timerd.conf", ino #1116, because it doesn't exist
Inode #721 was a directory with children - removing those too...
Cannot remove child "audioPIDs.data", ino #1167, because it doesn't exist
Inode #852 was a directory with children - removing those too...
Inode #982 was a directory with children - removing those too...
Inode #236 was a directory with children - removing those too...
Cannot remove child "prem_epg", ino #1162, because it doesn't exist
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
so geht das die ganze Zeit.
Was nun???
Danke
autoboot:1 loading kernel HILFE HILFE nicht geht mehr
-
- Interessierter
- Beiträge: 90
- Registriert: Donnerstag 2. März 2006, 16:03
-
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
Image auf der Box wohl im Eimer. Neu flashen mit dem Flash-Assistenten. Ucodes hattest Du hoffentlich gesichert.
http://wiki.tuxbox-cvs.sourceforge.net/ ... gassistent
cu
Jens
http://wiki.tuxbox-cvs.sourceforge.net/ ... gassistent
cu
Jens
-
- Interessierter
- Beiträge: 90
- Registriert: Donnerstag 2. März 2006, 16:03
Hab schon mit beiden Proggis probiert.jmittelst hat geschrieben:Image auf der Box wohl im Eimer. Neu flashen mit dem Flash-Assistenten. Ucodes hattest Du hoffentlich gesichert.
http://wiki.tuxbox-cvs.sourceforge.net/ ... gassistent
cu
Jens
Und bei beiden kommt am schluß
Warte auf rcs
-
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
-
- Interessierter
- Beiträge: 90
- Registriert: Donnerstag 2. März 2006, 16:03
jmittelst hat geschrieben:Solange da nur intern aus dem Flash geladen wird, wundert das ja wohl nicht, der muß schon aus dem Netzwerk vom Rechner laden.
cu
Jens
Bitte genauer erklären.
Cross-over kabel ist in der 2 Netzwerkarte und das Nullmodemkabel ist am com port 1
Ich hab schon getestet mit meier 2ten box, da gehts onhne probleme.
Also bitte eine genauere Erklärung, weil ich hab nun schon soviel gelesen und gestöbert aber ich komm auf keinen grünen zweig.
Danke
-
- Developer
- Beiträge: 2183
- Registriert: Mittwoch 10. Dezember 2003, 07:59
-
- Interessierter
- Beiträge: 90
- Registriert: Donnerstag 2. März 2006, 16:03
-
- Interessierter
- Beiträge: 90
- Registriert: Donnerstag 2. März 2006, 16:03