dieser Bericht/Fehlerliste wird etwas laenger..
Model:
Nokia Sat
Avia 500 = avia500v110
Avia 600 = avia600vb028
UCode_0014
Cam_01_02_105D
Image DietmarW 30.09.2006
HDD
IBM 80GB 7200RPM (IC35L080)
Bootlog beim starten:
Code: Alles auswählen
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Aug 30 2006 - 05:37:27)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ......... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 663938 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 663874 Bytes = 648.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (dietmarw@linux) (gcc version 3.4.4) #3 Mi Aug 30 05:
37:51 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rw rootfstype=jffs2
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30812k available (1128k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:72:b6
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 11, console /dev/console: '/etc/init.d/rcS'lti-call
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dbox2ide: $Id: main.c,v 1.4 2006/08/29 01:29:45 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: c38aa000
Probing IDE interface ide0...
hda: IC35L080AVVA07-0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=159560/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [10011/255/63] p1 p2
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f
ile or directory
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Missing lircd.conf, no lirc support!
Starting the automounter
Starting pid 118, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 7 days
[sectionsd] Events are old 60min after their end time
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[getservices] loading motor positions...
[getservices] motor.conf not found.
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...neutrino: /lib/libpng12.so.0:
no version information available (required by neutrino)
OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[camd] a card is in slot #2
[camd] no card is in slot #1
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
SPTS, queue 0 extended.
avia_gt_core: masking unhandled irq reg 0 bit 7
avia_gt_core: masking unhandled irq reg 1 bit 15
[timeThread] - 30.08.2006 19:41:54, tim: Wed Aug 30 19:41:54 2006
SPTS Mode Treiber Laden: ein
HWSections verwenden: ein
Avia Watchdog: aus
eNX Watchdog: aus
PMT Update: ein
Direktaufnahme Einstellungen:
Max Dateigr.: 2048
Anz. Ringbuffer: 50
O_Sync: ein
FDatasync: ein
Wenn ich jetzt z.B. cat /proc/kcore > /hdd/testfile (er hat 9MB geschrieben) wie hier vorgeschlagen mache kommt dies:
Code: Alles auswählen
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
PCR discontinuity: PCR: 0x08832F3B6, OLDPCR: 0x088323B1E, Diff: 47256
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
dboxide: inb: fifo not empty?!
CPLD Status is 0812d017
dboxide: trace
16f5e3cb: INB 17 d0
c388e238 c38aca8c c3898a78 c3899044
16f5e3ae: OUTB 17 c5
c38aca74 c3898a78 c3899044 c0003a98
16f5e39c: OUTB 16 e0
c38ac724 c3898a78 c3899044 c0003a98
16f5e38e: OUTB 15 c
c38ac704 c3898a78 c3899044 c0003a98
16f5e380: OUTB 14 30
c38ac6ec c3898a78 c3899044 c0003a98
16f5e373: OUTB 13 6d
c38ac6d0 c3898a78 c3899044 c0003a98
16f5e366: OUTB 12 80
c38ac6b4 c3898a78 c3899044 c0003a98
16f5e358: OUTB 11 0
c38ac69c c3898a78 c3899044 c0003a98
16f5e348: OUTB 4e 8
c38aca30 c3898a78 c3899044 c0003a98
16f5e31c: INB 17 50
c388e274 c3898a30 c3899044 c0003a98
16f5e308: INB 17 50
c388e238 c3898a30 c3899044 c0003a98
16f5e2cc: OUTB 16 e0
c388d4ec c3898a18 c3899044 c0003a98
16f5e063: INB 17 50
c38acd9c c3899004 c0003a98 c0003b9c
16f5e02f: INB 17 50
c388e0c8 c3898fcc c0003a98 c0003b9c
16f5d84a: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5d119: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5d0e4: INB 17 58
c38acd9c c3899004 c0003a98 c0003b9c
16f5d0b8: INB 17 58
c388e0c8 c3898fcc c0003a98 c0003b9c
16f5c8d6: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5c1a3: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5c16d: INB 17 58
c38acd9c c3899004 c0003a98 c0003b9c
16f5c136: INB 17 58
c388e0c8 c3898fcc c0003a98 c0003b9c
16f5b951: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5b21f: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5b1e9: INB 17 58
c38acd9c c3899004 c0003a98 c0003b9c
16f5b1bb: INB 17 58
c388e0c8 c3898fcc c0003a98 c0003b9c
16f5a9d3: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5a2a1: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
16f5a26d: INB 17 58
c38acd9c c3899004 c0003a98 c0003b9c
16f5a23a: INB 17 58
c388e0c8 c3898fcc c0003a98 c0003b9c
16f59a5a: OUTSW 10 800
c388d7e8 c388f5d8 c38ac118 c38ace5c
trace end.
PCR discontinuity: PCR: 0x088452ECC, OLDPCR: 0x088412AAC, Diff: 263200
PCR discontinuity: PCR: 0x08864034B, OLDPCR: 0x0886353A1, Diff: 44970
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
PCR discontinuity: PCR: 0x08872CFB6, OLDPCR: 0x0887239FA, Diff: 38332
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for commandCode: Alles auswählen
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[neutrino] executing /var/tuxbox/config/recording.start
/var/tuxbox/config/recording.start: /var/tuxbox/config/recording.start: 3: renic
e: not found
[neutrino] /var/tuxbox/config/recording.start failed with return code = 127
Record channel_id: 4b100016e91 epg: 4b100016e918790, apids 0x0 mode 1
fsk:0, Genre:32, Dauer: 90
PANIC: not enough space in ringbuffer, available 42887, needed 93225
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
PCR discontinuity: PCR: 0x0E7895C13, OLDPCR: 0x0E788BE4F, Diff: 40388
[stream2file] pthreads exit code: 4294967295
[neutrino] executing /var/tuxbox/config/recording.start
/var/tuxbox/config/recording.start: /var/tuxbox/config/recording.start: 3: renic
e: not found
[neutrino] /var/tuxbox/config/recording.start failed with return code = 127
Record channel_id: 4b100016e91 epg: 4b100016e918790, apids 0x0 mode 1
fsk:0, Genre:32, Dauer: 90
PANIC: not enough space in ringbuffer, available 42887, needed 93225
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
