Hier nochmal das bootlog der funktionierenden Platte.
Das ist 8GB Platte. Beim formatieren mit der dbox ist komischerweise eine Fat32 primäre Partition erhalten geblieben. Es wurde nur eine 4 GB ext3 partition angelegt.
Ich habe einfach diese funktionierende mit Acronis Trueimage auf die neue Platte geklont. Und siehe da die dbox erkennt die neue Platte auf einmal als gemountet.
Dass gesamte bootlog des ersten Versuchs, als das Script nicht formatiert hat, habe ich nicht mehr.
Trotzdem komisch, dass sich bei mir sich die neue leere Festplatte nicht formatieren ließ. Liegts vielleicht am Script?
<4>Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Sa Sep 16 10:57:44 CEST 2006
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
<4>Decrementer Frequency = 247500000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 65.74 BogoMIPS
<6>Memory: 30644k available (1296k kernel code, 368k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>Journalled Block Device driver loaded
<6>devfs: v1.12c (20020818) Richard Gooch (
rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
<6>squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:f7:53
<6>loop: loaded (max 8 devices)
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<7>CFI: Found no D-Box 2 flash memory device at location zero
<6>D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Intel/Sharp Extended Query Table at 0x0031
<6>Using buffer write method
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x20000,blocks=64
<5>Creating 6 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00040000 : "FLFS (U-Boot)"
<5>0x00040000-0x006a0000 : "root (SquashFS)"
<5>0x006a0000-0x00800000 : "var (JFFS2)"
<5>0x00020000-0x00800000 : "Flash without bootloader"
<5>0x00000000-0x00800000 : "Complete Flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
<6>dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $
<3>ide: late registration of driver.
<4>dboxide: activating cs2
<6>dboxide: address space of DBox2 IDE CPLD is at: 0xc38aa000
<6>Probing IDE interface ide0...
<4>hda: ST38641A, ATA DISK drive
<7>Unhandled interrupt 2f, disabled
<4>ide0 at 0x010-0x017,0x04e on irq 47
<4>hda: attached ide-disk driver.
<6>hda: 16809660 sectors (8607 MB) w/128KiB Cache, CHS=16676/16/63
<6>Partition check:
<6> /dev/ide/host0/bus0/target0/lun0: [PTBL] [1046/255/63] p1 p2
<6>kjournald starting. Commit interval 5 seconds
<4>EXT3-fs warning: checktime reached, running e2fsck is recommended
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
<6>EXT3-fs: recovery complete.
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2126] registered to adapter [PowerPC 8xx I2C adapter](pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C adapter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
<6>avia_av: AVIA500 sptsfix is on
<4>avia_av_core: Starting avia_av_wdt thread.
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
<6>avia_gt_core: autodetecting chip type... eNX
<6>avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
<6>avia_gt_ucode: loaded ucode vB107
<6>avia_gt_ucode: ucode section filters disabled.
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<4>avia_av_core: Starting avia_gt_wdt thread.
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<6>avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>ves1x93: Detected ves1993
<4>DVB: registering frontend 0:0 (VES1993)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>SPTS, queue 0 extended.
<6>SPTS, queue 0 extended.