Nokia Kabel Avia500 Problem

[pOo]

sieht nach defekter platte aus?!?!

[schnulle-666]

und noch einer der probs hat die hdd ist nagelneu und mit ext3 formatiert

beim booten

Code: Alles auswählen

Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38c4000
Probing IDE interface ide0...
hda: SAMQULG SP2514N, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
hda: attached ide-disk driver.
hda: host protected area => 1
        Vendor: Nokia
        Model: D-BOX2 
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0

Code: Alles auswählen

hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: setmax_ext LBA 488528752, native  65924176
hda: 65924176 sectors (33753 MB) w/8192KiB Cache, CHS=4103/255/63
hda: lost interrupt
hda: set_multmode: status=0x53 { DriveReady SeekComplete Index Error }
hda: set_multmode: error=0x06 { DriveStatusError TrackZeroNotFound }
hda: lost interrupt
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
Partition check:
 /dev/ide/host0/bus0/target0/lun0:[sectionsd] getUTC: read: Connection timed out

<3>hda: lost interrupt
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }
hda: lost interrupt
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: lost interrupt
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }
ide0: reset: master: sector buffer error
hda: lost interrupt
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }
hda: lost interrupt
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }
hda: read_intr: error=0x04 { DriveStatusError }
ide0: reset: master: sector buffer error
end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 2
end_request: I/O error, dev 03:00 (hda), sector 4
end_request: I/O error, dev 03:00 (hda), sector 6
end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 2
end_request: I/O error, dev 03:00 (hda), sector 4
end_request: I/O error, dev 03:00 (hda), sector 6
 unable to read partition table
Journalled Block Device driver loaded
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f
ile or directory

/dev/ide/host0/bus0/target0/lun0/disc:
 setting standby to 60 (5 minutes)
end_request: I/O error, dev 03:00 (hda), sector 0

beim formatieren

Code: Alles auswählen

msgbox  Message-Box Version 1.52
umount: Couldn't umount /hdd: Invalid argument
end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 2
end_request: I/O error, dev 03:00 (hda), sector 4
end_request: I/O error, dev 03:00 (hda), sector 6

Unable to read /dev/ide/host0/bus0/target0/lun0/disc