ich habe offensichtlich Probleme mit der Aufnahme von Sendungen auf lokale Festplatte am IDE2. Eigentlich dachte ich zuerst an Probleme mit dem Abspielen der Sendungen, aber ich habe die aufgenommenen Files aufs meine NAS kopiert und von dort mit meiner zweiten Box genau die gleichen Probleme. (Übrigens habe ich das auch schon im Image Forum angesprochen, da es mit dem Hallenberg Image, was mit dem IDE2 ausgeliefert wurde, mal funktioniert hat: http://tuxbox-forum.dreambox-fan.de/for ... 5b3dbaa9cb
Das Problem schaut auf meiner Nokia DBox2 Kabel folgendermaßen aus: Beim Abspielen der Files von der internen Platte schmiert mir die Box ab. Seltsammerweise funktioniert es aber teilweise, wenn ich vorher einen File vom Netzwerk abgespielt habe. Ich bekomme dann ganz normal ein Bild, aber keinen Ton.
Hier nochmal der Boot-log:
Code: Alles auswählen
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 157764
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Sep 30 2006 - 13:24:05)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 770226 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 770162 Bytes = 752.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (ImageTeam@yadi.org) (gcc version 3.4.4) #5 So Okt
1 14:54:14 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30620k available (1316k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:c7:91
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Thu Jan 1 01:00:00 CET 1970
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is on
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: chkIVersion.cpp,v 1.15 2006/07/30 21:23:29 mogway Exp $
Yadi Intern vom 01.10.2006 14:49 - Image-Version 2.2.0.0
Networkcfg eth0: 192.168.2.96/255.255.255.0 gw 192.168.2.100 ns
Startmode: Bootmenu - HWS: on
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc3ba2000
Probing IDE interface ide0...
hda: SAMSUNG SP2514N, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
Adding Swap: 1028148k swap-space (priority -1)
EXT2-fs warning (device ide0(3,2)): ext2_read_super: mounting ext3 filesystem as
ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
/dev/ide/host0/bus0/target0/lun0/disc:
setting drive write-caching to 0 (off)
/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 128
acoustic = 0 (128=quiet ... 254=fast)
Starting pid 116, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.227 2006/06/
08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
[camd] ca system id: 1722
[camd] set emm caid 1722 capid 1500
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] setting VideoFormat to auto
[yhttpd] Webserver nhttpd/3.0.2(yhttpd_core/1.0.4)
[yhttpd] Webserver starting...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.2.97:/shares/dbox/Filme -> /mnt/filme
[CFSMounter] Mount(0) 192.168.2.97:/shares/dbox/Bilder -> /mnt/bilder
[CFSMounter] Mount(0) 192.168.2.97:/shares/dbox/Charts -> /mnt/mp3
[neutrino] menue setup
[controld] setting VideoFormat to auto
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[neutrino] initialized everything
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 2f48
avia_gt_core: masking unhandled irq reg 1 bit 15
[camd] set emm caid 1722 capid 1500
TuxTxt running thread...(222)
TuxTxt service started 222
descramble onid: 0001 sid: 2f48 status: 8484
[timeThread] - 17.10.2006 21:00:31, tim: Tue Oct 17 21:00:31 2006
[timeThread] Time set via DVB, going to sleep for 1800 seconds.Code: Alles auswählen
[neutrino] no file /var/tuxbox/config/recording.start was found
Record channel_id: 44d00016dca epg: 44d00016dca2922, apids 0x0 mode 1
TuxTxt stopped service 68
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
Stop
SPTS, queue 0 extended.
[audio.cpp:setSource:83] ioctl(fd, AUDIO_SELECT_SOURCE, source): Invalid argument
[stream2file] pthreads exit code: 1
TuxTxt running thread...(068)
TuxTxt service started 68
[neutrino] no file /var/tuxbox/config/recording.end was found
SPTS-Mode Treiber laden AN
Bootmenü anzeigen AN
Infos beim Booten anzeigen AN
HW-Sections verwenden AUS
AVIA-Watchdog aktivieren AN
eNX-Watchdog aktivieren AUS
PMT Update verwenden AN
Wie von HorstH empfohlen. Desweiteren bei der Direktaufnahme:
Aufnahmeverzeichnis /hdd/filme
Max. Dateigröße (MB) 0000
Anz. Ringpuffer 50
Synchrones Schreiben (O_SYNC) ein
Synchrones Schreiben (fdatasync) ein
Videotext aus
PMT aufzeichen aus
Verzeichnisauswahl aus
lnge Dateinamen ein
Verzeichnisrechte 755
Beim Abspielen schauts dann so aus:
Code: Alles auswählen
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
[mp] Startplay
[mp] PlayFileThread starts
ide0: reset: success
[mp] found pida[0]: 0x006A, ac3=1
[mp] plain TS file with vpid=(0x0065) apid=(0x006A) ac3=(1)
[mp] buffer (1633344 bytes) created, using (24) total segments, opt = (18)
[mp] reader thread started ...
[mp] buffering ...
[mp] entering player loop
SPTS, queue 0 extended.
avia_av_wdt_thread: video decoding stopped ==> restart
[mp] ... reader thread terminated
[mp] leaving player loop ...
[mp] ... checking for another playlist item
[mp] mp_playFileThread terminated
SPTS, queue 0 extended.Gruß, Olli
