Here is the Bootlog :
ÿßdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 169.254.212.77, My IP 169.254.212.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 169.254.212.77; our IP address is 169.254.212.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 169.254.212.77; our IP address is 169.254.212.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 169.254.212.77; our IP address is 169.254.212.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 169.254.212.77; our IP address is 169.254.212.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit
Size: 8192 kB in 71 Sectors
Using SCC ETHERNET device
TFTP from server 169.254.212.77; our IP address is 169.254.212.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
<0>Rebooting in 180 seconds..￾
------ Extra Informations ------
Selected Network adapter: ULi PCI Fast Ethernet Controller - Packet Scheduler Miniport (1)
IP-Adress of the Network Adapter: 169.254.212.77
IP-Adress of the Dbox: 169.254.212.202
Comport: Communications Port (COM1)
Operatingsystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) 64 Processor 2800+ @ 1800 MHz
Filename of the Images: Sportster-Pro_1.05_rc042_08092006_1947_S_2xI.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.2
------ Powered by http://www.dboxservice-hallenberg.de ------
Any help gratefully accepted!