HDIO_DRIVE_CMD:ACOUSTIC failed: und Kurzschluss

to stream or not to stream
zuspaet
Interessierter
Interessierter
Beiträge: 29
Registriert: Mittwoch 23. Juni 2004, 23:52

HDIO_DRIVE_CMD:ACOUSTIC failed: und Kurzschluss

Beitrag von zuspaet »

Was läuft da falsch?
Es sollen doch alle Festplatten gehn, Oder?


ScriptLog:
[CPlugins] executing /lib/tuxbox/plugins/hddinit.sh
rm: cannot remove `/var/etc/.ext2': No such file or directory
rm: cannot remove `/var/etc/.xfs': No such file or directory
umount: Couldn't umount /hdd: Invalid argument
swapoff: /dev/ide/host0/bus0/target0/lun0/part1: Invalid argument
Checking that no-one is using this disk right now ...
/dev/ide/host0/bus0/target0/lun0: p1 p2
OK
start: (c,h,s) expected (0,0,1) found (0,0,2)
end: (c,h,s) expected (57,7,59) found (127,14,62)
start: (c,h,s) expected (1023,14,62) found (128,0,1)
end: (c,h,s) expected (1023,14,62) found (1023,14,63)
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
/dev/ide/host0/bus0/target0/lun0: p1 p2
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
mkswap: Unable to set up swap-space: unreadable
mke2fs 1.35 (28-Feb-2004)
avia_gt_dmx: queue 4 overflow (count: 1)
PCR discontinuity: PCR: 0x1DA905961, OLDPCR: 0x1DA8FBB30, Diff: 40497
PCR discontinuity: PCR: 0x1DA917B76, OLDPCR: 0x1DA90DD3E, Diff: 40504
PCR discontinuity: PCR: 0x1DA93ADF8, OLDPCR: 0x1DA930FAB, Diff: 40525
PCR discontinuity: PCR: 0x1DA981BC1, OLDPCR: 0x1DA978F1D, Diff: 36004
avia_gt_dmx: queue 4 overflow (count: 1)
PCR discontinuity: PCR: 0x1DA9B78FB, OLDPCR: 0x1DA9AE398, Diff: 38243
PCR discontinuity: PCR: 0x1DA9DB444, OLDPCR: 0x1DA9D1622, Diff: 40482
PCR discontinuity: PCR: 0x1DA9EBC13, OLDPCR: 0x1DA9E1DE2, Diff: 40497
avia_gt_dmx: queue 4 overflow (count: 1)
insmod: A module named jbd already exists
insmod: A module named ext3 already exists
EXT3-fs: ide0(3,2): couldn't mount RDWR because of unsupported optional features
(800000).
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a
rgument
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
BootLog:
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: S@MRUNG SV0432A 000, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: 8389072 sectors (4295 MB) w/482KiB Cache, CHS=9664/14/62
Partition check:
/dev/ide/host0/bus0/target0/lun0:Thu Jan 1 12:00:00 CET 1970
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
p1 p2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
EXT2-fs: not enough memory
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid argument
PS: ich habe eine Nokia Sat Avia 500
Zuletzt geändert von zuspaet am Dienstag 21. November 2006, 15:48, insgesamt 1-mal geändert.
jmittelst
Tuxboxer
Tuxboxer
Beiträge: 6044
Registriert: Montag 17. November 2003, 06:48

Beitrag von jmittelst »

Was ist denn das für ein Image auf der Box da?
Kannste mal ein komplettes Bootlog posten?

cu
Jens
zuspaet
Interessierter
Interessierter
Beiträge: 29
Registriert: Mittwoch 23. Juni 2004, 23:52

Beitrag von zuspaet »

das ist JTG
Ist die Platte zu alt/klein? :gruebel:
Edit: Habe keine andere zum testen.



BootLog:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 00-00.00.00.00.00.00-00
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670137 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670073 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Do Okt 26 15
:50:20 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:18:b8:97
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: S@MRUNG SV0432A 000, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: 8389072 sectors (4295 MB) w/482KiB Cache, CHS=9020/15/62
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
EXT2-fs: not enough memory
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid argument
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
setting acoustic management to 128
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = 0 (128=quiet ... 254=fast)
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 1
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.0.5 (yhttpd_core/1.1.1)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 0 bit 7
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
Vielen Dank

Tom
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06

Beitrag von gurgel »

das ist normal. Die Platte untersützt das Kommando nur einfach nicht (langsamer drehen).
Test
zuspaet
Interessierter
Interessierter
Beiträge: 29
Registriert: Mittwoch 23. Juni 2004, 23:52

Beitrag von zuspaet »

Hallo,

das habe ich mir gedacht.
Kann ich das Kommando (langsamer drehen) rausnehmen? Denn so funktioniert garnix. :gruebel:
Oder muss ich mir erst eine neue platte besorgen?


IRONIE ON:
Ich kann mir doch nicht 6-7 Wochen eine neue Platte hinlegen und/oder davon ausgehen das die Lieferzeit eingehalten wird :D

Bei wiki steht es gehn alle Festplatten

cu
Tom
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06

Beitrag von gurgel »

mhhh, bist du sicher dass das Musemsstück auch noch funktioniert?
Test
zuspaet
Interessierter
Interessierter
Beiträge: 29
Registriert: Mittwoch 23. Juni 2004, 23:52

Beitrag von zuspaet »

mhhh, die Platte ist sonst ok
hab sie vorher getestet


also könnte es auch ein anderer Fehler sein
hier ein neuer

BootLog:
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: S@MRUNG SV0432A 000, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: 8389072 sectors (4295 MB) w/482KiB Cache, CHS=9664/14/62
Partition check:
/dev/ide/host0/bus0/target0/lun0:<6>event: $Id: event.c,v 1.12 2003/09/30 05:45
:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
SGI XFS with no debug enabled
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f
ile or directory
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 1
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
setting acoustic management to 128
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
HDIO_DRIVE_CMD:ACOUSTIC failed:lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Input/output error
acoustic = 0 (128=quiet ... 254=fast)
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.0.5 (yhttpd_core/1.1.1)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
PES, queue 0 normal.
[camd] program number 0382 unsupported due to missing parental coavia_gt_core: m
asking unhandled irq reg 1 bit 15
ntrol
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] - 19.11.2006 18:45:49, tim: Sun Nov 19 18:45:49 2006
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
ScriptLog
[CPlugins] executing /lib/tuxbox/plugins/hddinit.sh
rm: cannot remove `/var/etc/.ext2': No such file or directory
rm: cannot remove `/var/etc/.ext3': No such file or directory
umount: Couldn't umount /hdd: Invalid argument
swapoff: /dev/ide/host0/bus0/target0/lun0/part1: Invalid argument
Checking that no-one is using this disk right now ...
/dev/ide/host0/bus0/target0/lun0: p1 p2
OK
start: (c,h,s) expected (0,0,1) found (0,0,2)
end: (c,h,s) expected (52,6,59) found (127,13,62)
start: (c,h,s) expected (1023,13,62) found (128,0,1)
end: (c,h,s) expected (1023,13,62) found (1023,141,63)
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
/dev/ide/host0/bus0/target0/lun0: p1 p2
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
ide0: unexpected interrupt, status=0x58, count=11
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=12
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=13
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=14
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=15
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=16
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=17
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=18
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
ide0: unexpected interrupt, status=0x58, count=19
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }

end_request: I/O error, dev 03:02 (hda), sector 0
hda: drive not ready for command
mkfs.xfs: pwrite64 failed: Input/output error
insmod: A module named xfs already exists
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset: success
XFS: bad magic number
XFS: SB validate failed
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a
rgument
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06

Beitrag von gurgel »

zuspaet hat geschrieben:hda: S@MRUNG SV0432A 000, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: 8389072 sectors (4295 MB) w/482KiB Cache, CHS=9664/14/62
ich sehe grade dass das massivst Bitfehler auftreten.
Wenn die Platte im PC tut, würde ich hier eher davon ausgehen, dass die Verbindung von der Platte zum CPLD probleme macht, eventuell ein Kurzschluss an den Widerstandsnetzwerken?
Test
zuspaet
Interessierter
Interessierter
Beiträge: 29
Registriert: Mittwoch 23. Juni 2004, 23:52

Beitrag von zuspaet »

ja, :cry:

die 2 Pins sind an dem Bauteil davor auf der Rückseite vermutlich verbunden

ich dachte die werden getestet :gruebel:

also zurücksenden und wieder 6-7 Wochen warten :cry: :cry: :cry:
gut das ich mir noch keine Platte gekauft habe :wink:
wieso immer ich :cry:


Bild