hoffentlich hängen euch die ide-2 einträge nicht schon zum hals raus,
würd' hier nicht posten wenn ich nicht schon alles mir mögliche probiert hätte.
meine box fährt mit eingebautem if tadellos hoch, if und platte werden auch erkannt:
- Probing IDE interface ide0...
hda: SAMSUNG SP1604N, ATA DISK drive
- Writing inode tables: hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: irq timeout: status=0xd0 { Busy }
ide0: unexpected interrupt, status=0x80, count=1
ide0: reset: success
- dboxide: inb: fifo not empty?!
CPLD Status is 0c120030
dboxide: trace
42db29d5: OUTSW 10 100
c38777e8 c38795d8 c389ad1c c388300c
42db293e: INB 17 58
.....
- 2 unterschiedliche platten,
- formatierung am pc
- plattentest am pc - platte ok
- stecker und anschlüsse zig male geprüft, gereinigt rausgemessen
- modemport rausgeputzt / pins kontrolliert
...
weiß nicht mehr weiter. was kann ich noch versuchen ohne mein ide-if abzugeben?
meine box:
nokia 2xI / avia 500 / image: blue_peer
###############################
hier die traces in der vollen version:
hochlauf:
- DDF: Calibrating delay loop... debug: DDF: 67.79 Bo
goMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID xxxxxxxxxxxxxx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Nov 11 2006 - 02:41:40)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ....
.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670193 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670129 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (BoxCracker Image Team) (gcc version 3.4.4)#11 Sa N
ov 11 02:42:37 CET 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:e0:cb
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00460000 : "root (squashfs)"
0x00460000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
insmod: Warning: kernel-module version mismatch
/lib/modules/2.4.33.3-dbox2/misc/multicam.o was compiled for kernel vers
ion 2.4.33-dbox2
while this kernel is version 2.4.33.3-dbox2
DBox2 Multicam Driver v1.01 skars & doz21
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
insmod: Warning: kernel-module version mismatchdboxide: Id: main.c,v 1.10 2006/1
0/04 00:36:41 carjay Exp
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc3896000
/lib/modules/2.4.33.3-dbox2/misc/cardserver.o was compiled for kernel ve
rsion 2.4.33-dbox2
Probing IDE interface ide0...
hda: SAMSUNG SP1604N, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
while this kernel is version 2.4.33.3-dbox2
[camd-cardserver.o] compiled Jan 6 2004, 22:44:41
[camd-cardserver.o] ioport base = ff000950
[camd-cardserver.o] commproc base = ff0009c0
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 312581808 sectors (160042 MB) w/2048KiB Cache, CHS=19457/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
Journalled Block Device driver loaded
route: SIOC[ADD|DEL]RT: Network is unreachable
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a
rgument
Detected STB:
Vendor: Nokia
Model: D-BOX2
Adding Swap: 104380k swap-space (priority -1)
insmod: Warning: kernel-module version mismatch
/lib/modules/2.4.33.3-dbox2/misc/dvb-core.o was compiled for kernel vers
ion 2.4.33-dbox2
while this kernel is version 2.4.33.3-dbox2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: Warning: kernel-module version mismatch
/lib/modules/2.4.33.3-dbox2/misc/dbox2_fp_input.o was compiled for kerne
l version 2.4.33-dbox2
while this kernel is version 2.4.33.3-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 3 errors.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Starting the automounter
kb2rcD 0.16 started [01.01.1970 - 00:56:04]
Starting pid 134, console /dev/console: '/etc/init.d/start'
kb2rcD <use 21 conversions>
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Gbox wird nicht gestartet
CCcam wird nicht gestartet
Camd3 wird nicht gestartet
/var/plugins/.start_camd: /var/plugins/.start_camd: 30: /var/emu/newcs: not foun
d
TPS_AES.txt: No such file or directory
============================================================
(compiled Nov 5 2006 22:44:04)
styled by TBT Team, Next Level version 2.12(dream-dbox2-Triple Dragon)
============================================================
NewCamd wird nicht gestartet
[evocamd] Process id 158
Camd2 wird nicht gestartet
[camd] ca system id: 1702
Scam wird nicht gestartet
MGCamd wird nicht gestartet
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.0.6 (yhttpd_core/1.1.2)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold ds9 netkill
er)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[CFSMounter] Mount(1) 192.168.5.3:mp3 -> /mnt/mp3
CIFS: Unknown mount option udp
CIFS: Unknown mount option nolock
mount: Mounting //192.168.5.3/mp3 on /mnt/mp3 failed: Invalid argument
[CFSMounter] FS mount error: "mount -t cifs //192.168.5.3/mp3 /mnt/mp3 -o userna
me=root,password=dbox2,unc=//192.168.5.3/mp3,ro,soft,udp,nolock,rsize=8192,wsize
=8192"
[CFSMounter] Mount(1) 192.168.5.3:Videos -> /mnt/filme
CIFS: Unknown mount option udp
CIFS: Unknown mount option nolock
mount: Mounting //192.168.5.3/Videos on /mnt/filme failed: Invalid argument
[CFSMounter] FS mount error: "mount -t cifs //192.168.5.3/Videos /mnt/filme -o u
sername=root,password=,unc=//192.168.5.3/Videos,ro,soft,udp,nolock,rsize=8192,ws
ize=8192"
[CFSMounter] Mount(1) 192.168.5.3:temp -> /mnt/plugins
CIFS: Unknown mount option udp
CIFS: Unknown mount option nolock
mount: Mounting //192.168.5.3/temp on /mnt/plugins failed: Invalid argument
[CFSMounter] FS mount error: "mount -t cifs //192.168.5.3/temp /mnt/plugins -o u
sername=root,password=,unc=//192.168.5.3/temp,rw,soft,udp,nolock,rsize=8192,wsiz
e=8192"
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 18 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
zap failed!
initialisierung:
- msgbox Message-Box Version 1.56
msgbox Message-Box Version 1.56
umount: Couldn't umount /hdd: Invalid argument
The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): Building a new DOS disklabel. Changes will remain in memor
y only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
[sectionsd] getUTC: read: Connection timed out
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1-19457, default 1): Last cylinder or +s
ize or +sizeM or +sizeK (1-19457, default 19457):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (14-19457, default 14): Using default val
ue 14
Last cylinder or +size or +sizeM or +sizeK (14-19457, default 19457): Using defa
ult value 19457
Command (m for help): Command (m for help): Partition number (1-4): Hex code (ty
pe L to list codes): Changed system type of partition 1 to 82 (Linux swap)
Command (m for help):
Disk /dev/ide/host0/bus0/target0/lun0/disc: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id S
ystem
/dev/ide/host0/bus0/target0/lun0/part1 1 13 104391
82 Linux swap
/dev/ide/host0/bus0/target0/lun0/part2 14 19457 156183930
83 Linux
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host0/bus0/target0/lun0: p1 p2
Syncing disks.
msgbox Message-Box Version 1.56
Setting up swapspace version 1, size = 106889216 bytes
msgbox Message-Box Version 1.56
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
152576 inodes, 39045982 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
1192 block groups
32768 blocks per group, 32768 fragments per group
128 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: irq timeout: status=0xd0 { Busy }
ide0: unexpected interrupt, status=0x80, count=1
ide0: reset: success
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: irq timeout: status=0xd0 { Busy }
ide0: unexpected interrupt, status=0x80, count=2
ide0: reset: success
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
[sectionsd] getUTC: read: Connection timed out
hda: irq timeout: status=0xd0 { Busy }
ide0: unexpected interrupt, status=0x80, count=3
ide0: reset: success
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: irq timeout: status=0xd0 { Busy }
ide0: unexpected interrupt, status=0x80, count=4
ide0: reset: success
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: irq timeout: status=0xd0 { Busy }
ide0: unexpected interrupt, status=0x80, count=5
ide0: reset: success
dboxide: inb: fifo not empty?!
CPLD Status is 0c120030
dboxide: trace
42db29d5: OUTSW 10 100
c38777e8 c38795d8 c389ad1c c388300c
42db293e: INB 17 58
c389ac3c c388300c c0003a98 c0003b9c
42db2903: INB 17 58
c38780c8 c3882fd4 c0003a98 c0003b9c
42db274c: OUTSW 10 100
c38777e8 c38795d8 c389ad1c c388300c
42db2715: INB 17 58
c389ac3c c388300c c0003a98 c0003b9c
42db26d6: INB 17 58
c38780c8 c3882fd4 c0003a98 c0003b9c
42db2543: OUTSW 10 100
c38777e8 c38795d8 c389abb0 c3882a78
42db24c1: INB 17 58
c3878274 c389aa8c c3882a78 c388304c
42db24ae: INB 17 58
c3878238 c389aa8c c3882a78 c388304c
42db248f: OUTB 17 34
c389aa74 c3882a78 c388304c c0003a98
42db2480: OUTB 16 e0
c389a8fc c3882a78 c388304c c0003a98
42db2474: OUTB 15 c3
c389a8e4 c3882a78 c388304c c0003a98
42db2468: OUTB 14 2f
c389a8cc c3882a78 c388304c c0003a98
42db245b: OUTB 13 dd
c389a8b4 c3882a78 c388304c c0003a98
42db2450: OUTB 12 20
c389a89c c3882a78 c388304c c0003a98
42db2444: OUTB 11 0
c389a884 c3882a78 c388304c c0003a98
42db2439: OUTB 15 0
c389a86c c3882a78 c388304c c0003a98
42db242d: OUTB 14 0
c389a854 c3882a78 c388304c c0003a98
42db2421: OUTB 13 3
c389a83c c3882a78 c388304c c0003a98
42db2416: OUTB 12 0
c389a824 c3882a78 c388304c c0003a98
42db240a: OUTB 11 0
c389a80c c3882a78 c388304c c0003a98
42db23fa: OUTB 4e 8
c389aa30 c3882a78 c388304c c0003a98
42db23d3: INB 17 50
c3878274 c3882a30 c388304c c0003a98
42db23bd: INB 17 50
c3878238 c3882a30 c388304c c0003a98
42db238a: OUTB 16 e0
c38774ec c3882a18 c388304c c0003a98
42db21df: INB 17 50
c389ac3c c388300c c0003a98 c0003b9c
42db21a0: INB 17 50
c38780c8 c3882fd4 c0003a98 c0003b9c
42dadf6a: OUTSW 10 100
c38777e8 c38795d8 c389ad1c c388300c
42dadf39: INB 17 58
c389ac3c c388300c c0003a98 c0003b9c
42dadf01: INB 17 58
c38780c8 c3882fd4 c0003a98 c0003b9c
42dadd41: OUTSW 10 100
c38777e8 c38795d8 c389ad1c c388300c
trace end.
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: irq timeout: status=0xd0 { Busy }
ide0: unexpected interrupt, status=0x80, count=6
ide0: reset: success
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
...
