dbox2 hängt

[maccanicu]

hallo
das ist 1post die ich mache ich danke das sie mich angenommen haben.

ich habe einen d-box2 nokia 2x1 mit linux system , es hat früher super funktioniert.
heute hab ich ide-interface montiert seid diesem moment der reciver bootet nicht mehr.

ich hab gemerkt das wen ich das ide-interface rausnehme der reciver starte wieder ,aber jetzt funktionier der halbe display die oberseite funktioniert die unterseite belbt schwarz.


ich hab mehre als 1 mal versucht wenn das ide-interface zusammen schraube der reciver bootet nicht mehr wen ich es raus mache geht der reciver wieder aber fehler am diesplay .

was mache ich falsch ?

danke. Gruß

[Charles Darwin jun.]

Hast du NUR das IDE-IF angeschlossen, oder das IF mit der Festplatte...

...weil das Problem mit dem Booten, kann z.B. mit deiner Festplatte zusammenhängen (evtl. ein ICYDOCK IDE Wechselrahmen mit USB-Support, oder Platte net auf Master gejumpert)

Das mit deinem Display versteh ich net...kann es sein, dass das Displayflachbandkabel beschädigt wurde (eingerissen)?

Ohne Bootlog wirds wohl nicht gehen...uuups, dass ich jetzt auch so argumentiere, gibt mir zu denken

[maccanicu]

danke das zurück geantwortet haben

ich hab mit festplatte und ohne festplatte versucht.

die festplatte war auf Master gejumpert, und ist fest geschraubt in original alterung geliefert .

ich hab mehr als immage versucht, (sportest ,glj,md ) und immer das selbe problem.


die log ich mach am nächsten tag .

tschüs

[maccanicu]

(sportest ,(UNERWÜNSCHTER INHALT, Anm. d. Forenbetreibers),md ) und immer das selbe problem

tschüs

endschuldigung

[CarstenW]

Mach Dir mal ein JTG drauf.

[maccanicu]

ich hab die bootlog, mit IF aber one festplatte, und di reciever immer reboot


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-39.2c.1c.07.00.00-cf
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Nov 18 2006 - 20:59:16)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ......................... .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 678197 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 678133 Bytes = 662.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (mixvt@tuxbox) (gcc version 3.4.4) #3 Fri Feb 9 21:33
:26 MSK 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30812k available (1156k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:75:c0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00560000 : "root (Squashfs)"
0x00560000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.02.09-15:41+0000) multi-call info, udhcpc (v
1.2.1) started
debug, Sending discover...
debug, Sending select for 192.168.2.103...
info, Lease of 192.168.2.103 obtained, lease time 259200
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
AVIA: AVIA 500 LB4 found. (nice)
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
init avcmd procfs entry
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 131072), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Frontend: VES1893A rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_napi: procfs entrys mixvt Exp $
avia_gt_napi: hw section filtering disabled.
insmod: multicam.o: no module by that name found
MPEG Audio Decoder 0.14.2 (beta) - Copyright (C) 2000-2001 Robert L[camd-cardser
ver.o] compiled Nov 18 2006, 18:52:29
[camd-cardserver.o] ioport base = ff000950
[camd-cardserver.o] commproc base = ff0009c0
eslie
avia_oss: IOCTL: SNDCTL_DSP_SPEED (arg=44100)
avia_gt_pcm_set_rate(44100)
mgemud May 17 2006 15:11:40
doing killall 2>/dev/null
[mgemud] CS: no type: 255 old type: 255
[mgemud] EMU: no type: 255 old type: 255

Please press Enter to activate this console. 116 frames decoded (0:00:03.0), -18
.5 dB peak amplitude, 0 clipped samples
$Id: zapit.cpp,v 1.290.2.50 2003/06/13 10:53:15 digi_casi Exp $
[fe0] voltage 13 high 0
[zapit] new frontend 0 fd 3
[fe0] diseqc power on
[fe0] diseqc reset
[zapit.cpp] diseqc type = 5
Settings api: 3
[getservices] loading motor positions...
[getservices] motor.conf not found.
/var/tuxbox/config/zapit/uservices.xml: No such file or directory
[zapit.cpp] diseqc type = 5
[zapit] sdt monitor started
[emud] got 3 cmd 2
[zapit] current satellite = 0 (0), new satellite = 192 (0)
[fe0] diseqc 0, uncommitted 255 -> 0
[fe0] tone off
[fe0] diseqc no. 0
[timerd] wakeup from standby: no
$Id: sectionsd.cpp,v 1.235 2007/01/23 20:23:47 houdini Exp $
[fe0] try frequency 11954000 pol 0 diseqcType 5 diseqc 0
[fe0] voltage 18 high 0
[fe0] tone on
[fe0] frequency 1354000 inv 2 rate 27500000 fec 3 pol 0
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/epgfilter.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
Oops: kernel access of bad area, sig: 11
NIP: C0048910 XER: 00000000 LR: C003D780 SP: C1803DF0 REGS: c1803d40 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000034, DSISR: C0000000
TASK = c1802000[129] 'neutrino' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 0000C2B9 C1803DF0 C1802000 C01F2660 C1803E40 00000004 C1803EF0 00000000
GPR08: 0000002F 00007A38 C01F8000 C0140000 24004044 00000000 00000000 00000002
GPR16: 00000016 00000000 0000000D 00000000 00009032 01803F40 00000000 C01403EC
GPR24: C1F0F001 00000003 C1803E40 C01F2660 0029AB98 C01FFA38 FFFFFFF0 00000000
Call backtrace:
0FF1078C C003D780 C003DBF8 C003E9D8 C003EDB8 C0030BC0 C0030E2C
C000285C 00000000 30006C54 300070CC 300098E4 3000AC5C 30009CA0
30003EE0 3000DEEC 30002208 3000287C 3000ED78
Segmentation fault
Oops: kernel access of bad area, sig: 11
NIP: C0048910 XER: 00000000 LR: C003D780 SP: C181FE30 REGS: c181fd80 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000034, DSISR: C0000000
TASK = c181e000[101] 'start_neutrino' Last syscall: 195
last math 00000000 last altivec 00000000
GPR00: 0000C2B9 C181FE30 C181E000 C01F2660 C181FE80 00000004 C1F1900D 00000000
GPR08: 0000002F 00007A38 C01F8000 C0140000 24002044 100B6EC0 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFF838 00009032 0181FF40 00000000 C01403EC
GPR24: C1F19001 00000003 C181FE80 C01F2660 0029AB98 C01FFA38 FFFFFFF0 00000000
Call backtrace:
C1C7CE10 C003D780 C003DBF8 C003E9D8 C003EBC8 C003A590 C000285C
00000019 10049950 1004AB04 10048C4C 1004B6DC 10048C4C 10048C4C
1004A300 10048C4C 10049120 1004970C 10004184 10004200 0FE4664C
00000000
Segmentation fault
Oops: kernel access of bad area, sig: 11
NIP: C0048910 XER: 00000000 LR: C003D780 SP: C1FF5E00 REGS: c1ff5d50 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0FD5E610, DSISR: C0000000
TASK = c1ff4000[1] 'init' Last syscall: 33
last math 00000000 last altivec 00000000
GPR00: 0000C25E C1FF5E00 C1FF4000 C01F2660 C1FF5E50 00000004 C147B00C 00000000
GPR08: 0000002F 000011A8 C01F8000 C0140000 24002044 100B6EC0 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01FF5F20 00000000 C01403EC
GPR24: C147B001 00000003 C1FF5E50 C01F2660 0023EE05 C01F91A8 0FD5E5CC 0FD5E5DC
Call backtrace:
00000000 C003D780 C003DBF8 C003E9D8 C003EBC8 C003015C C000285C
00008000 100200A4 10004184 10004200 0FE4664C 00000000
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..

[Tommy]

oben hast Du Dich für das Drecksimage entschuldigt und machst Dir gleich das nächste drauf. Hast wohl noch keine Schreibrechte im Board des Erstellers?

Schäm Dich für

[camd-cardser
ver.o] compiled Nov 18 2006, 18:52:29

[maccanicu]

oben hast Du Dich für das Drecksimage entschuldigt und machst Dir gleich das nächste drauf. Hast wohl noch keine Schreibrechte im Board des Erstellers?

Schäm Dich für

[camd-cardser
ver.o] compiled Nov 18 2006, 18:52:29

entschuldigt ist kein problem zum sagen


die problem ist die deusch schreiben, später wen mein sohn komt dan erklere ich es dier besser .

[maccanicu]

@Tommy

so wie ich es dir versprochen habbe mein sohn ist da und jezz hoffe ich das wir uns verstehen.

am 1 mal habt ihr mich angemmozzt weil ich ein name vom image (Drecksimage).

ich hab schnell verstanden was der fehler war also hab ich eine saubere image gesucht , ohne setting , ohne key , usw. und sagst mir das es immer noch nicht in ordung ist .

jetzt habe ich eine image" Yadi Release 2.2.0.0 - Tuxbox CVS Stand vom 17.03.2007 " .

jetzt bevor ich 2 stunden verliere wider kannst du mikr sagen ob diese imge geht ??

wen sie nicht in ordung ist kannst du mir sagen wo und welsche ich eine suchen soll ohne das ich mich in forums regristiern soll .

ich erinner dich das mein display nicht geht .

tschüs

[JOCKYW2001]

Yadi may work, but "Jack the Grabber" works for sure.

Download the 23/10/2006 image from:
http://www.jackthegrabber.de/viewtopic.php?t=7787
That image already works fine on Nokia & Philips

And if you want you can update it easily with the 05/03/2007 snapshot here:
http://www.jackthegrabber.de/viewtopic.php?t=9718

@Riker and friends: Thanks for a great Image

[maccanicu]

ich hab die bootlog von image " jack the Grabber " .

das ist die bootlog one IF .

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-39.2c.1c.07.00.00-cf
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670137 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670073 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Do Okt 26 15
:50:20 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:75:c0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970
info, udhcpc (v1.2.1) started
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
debug, Sending discover...
debug, Sending select for 192.168.2.102...
error, received bogus message (bad magic) -- ignoring
error, received bogus message (bad magic) -- ignoring
info, Lease of 192.168.2.102 obtained, lease time 259200
deleting routers
route: SIOC[ADD|DEL]RT: No such process
adding dns 192.168.2.1
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[getservices] loading motor positions...
[getservices] motor.conf not found.
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 43E onid 1
[getservices] dup transponder id 438 onid 1
[getservices] dup transponder id 442 onid 1
[getservices] dup transponder id 412 onid 1
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.0.5 (yhttpd_core/1.1.1)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[italiano.locale] missing entry: AUDIOSelectMenue.head
[italiano.locale] missing entry: EPGPlus.actions
[italiano.locale] missing entry: EPGPlus.bybouquet_mode
[italiano.locale] missing entry: EPGPlus.bypage_mode
[italiano.locale] missing entry: EPGPlus.change_font_size
[italiano.locale] missing entry: EPGPlus.change_font_style
[italiano.locale] missing entry: EPGPlus.change_size
[italiano.locale] missing entry: EPGPlus.channelentry_font
[italiano.locale] missing entry: EPGPlus.channelentry_separationlineheight
[italiano.locale] missing entry: EPGPlus.channelentry_width
[italiano.locale] messages for further missing entries will be suppressed
[italiano.locale] superfluous entry: flashupdate.action
[italiano.locale] superfluous entry: flashupdate.actionwriteflash
[italiano.locale] superfluous entry: flashupdate.reboot
[italiano.locale] superfluous entry: infoviewer.cantdecode
[italiano.locale] superfluous entry: mainsettings.plugins
[italiano.locale] superfluous entry: mainsettings.scan
[italiano.locale] superfluous entry: miscsettings.bootinfo
[italiano.locale] superfluous entry: miscsettings.boxtype
[italiano.locale] superfluous entry: miscsettings.fb_destination
[italiano.locale] superfluous entry: miscsettings.startbhdriver
[italiano.locale] superfluous entry: movieplayer.pesplayback
[italiano.locale] superfluous entry: movieplayer.vlchelp
[italiano.locale] superfluous entry: parentallock.onstart
[italiano.locale] superfluous entry: recordingmenu.vcr_devicename
[italiano.locale] superfluous entry: satsetup.extended_lnb
[italiano.locale] superfluous entry: scants.services
[italiano.locale] superfluous entry: streamfeatures.info
[italiano.locale] superfluous entry: streaminfo.ecm_invalid
[italiano.locale] superfluous entry: streaminfo.not_crypted
[italiano.locale] superfluous entry: timerlist.empty
[italiano.locale] has 413 missing entrys
[lcdd] time-skin not found -> using default...
[sectionsd] getUTC: read: Connection timed out
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
zap failed!


die dbox starter normal

das ist die bootlog MIT IF


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-39.2c.1c.07.00.00-cf
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.101, My IP 192.168.2.103
debug: Sending TFTP-request for file C/Programmi/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-75-c0
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.2.101; our IP address is 192.168.2.103
Filename 'C/Programmi/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.2.101; our IP address is 192.168.2.103
Filename 'C/Programmi/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.2.101; our IP address is 192.168.2.103
Filename 'C/Programmi/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.2.101; our IP address is 192.168.2.103
Filename 'C/Programmi/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 3
TFTP from server 192.168.2.101; our IP address is 192.168.2.103
Filename 'C/Programmi/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again

MIT IF die reciver bootet nicht

[JOCKYW2001]

[quote="maccanicu"]

Code: Alles auswählen

debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.101, My IP 192.168.2.103
debug: Sending TFTP-request for file C/Programmi/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

Switch off your BOOTP server buddy !

[maccanicu]

Switch off your BOOTP server buddy !

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-39.2c.1c.07.00.00-cf
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670137 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670073 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Do Okt 26 15
:50:20 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:75:c0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: SAMSUNG SV2042H, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970
info, udhcpc (v1.2.1) started
debug, Sending discover...
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
debug, Sending discover...
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is on
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
debug, Sending discover...
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
/share/udhcpc/default.script: exec: 7: /share/udhcpc/sample.leasefail: not found

info, No lease, failing.
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[zapit] PMT update enabled
[getservices] loading motor positions...
[getservices] motor.conf not found.
Oops: kernel access of bad area, sig: 11
NIP: C004A6BC XER: 20000000 LR: C004C0F0 SP: C135FE60 REGS: c135fdb0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 1011B23C, DSISR: C0000000
TASK = c135e000[137] 'timerd' Last syscall: 102
last math 00000000 last altivec 00000000
GPR00: C004C0F0 C135FE60 C135E000 1011B218 00000001 00000000 C135FEE8 7F7F7F7F
GPR08: 00808080 C016504C 00000000 C01FA1D0 24002028 1002D1E4 00000000 30019B54
GPR16: 30019814 10025878 1000FC70 00000004 00009032 0135FF40 00000000 C0002AA8
GPR24: C0002800 C135FEE8 00000000 C017FBE0 FFFFFF9F 00000001 00000004 00000001
Call backtrace:
6B000007 C004C0F0 C00C2AA4 C00C35D0 C00C3684 C00C4514 C000285C
300081F8 0FF8D458 0FFDB04C 0FFDB164 1000FD04 0FE07B84 0FD1D68C
Unhandled interrupt 14, disabled
Oops: kernel access of bad area, sig: 11
NIP: C00D08C4 XER: 20000000 LR: C0016F74 SP: C1C3BE30 REGS: c1c3bd80 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 616E637E, DSISR: C0000000
TASK = c1c3a000[136] 'zapit' Last syscall: 45
last math 00000000 last altivec 00000000
GPR00: 00000000 C1C3BE30 C1C3A000 C0145418 00000005 C0160000 C015A1D0 00068FB0
GPR08: C01454A0 00000004 00000001 C01F9D40 22002024 1003463C C0162438 C0162840
GPR16: 00000000 00000000 00000000 00000000 00001032 01C3BF40 C0000000 C0160000
GPR24: C0160000 C0160000 C0160000 C1C3BE58 00000FAE C0145418 C01F9D44 616E6361
Call backtrace:
C198FA40 C0016F74 C0014F68 C0014DD0 C001498C C0004540 C0002AA0
0FD6C270 0FDC7A5C 0FCD5CD8 0FF14B78 0FF14BF0 0FF14B68 0FF14BF0
0FF14B68 0FF14BF0 0FF14B68 0FF155A0 10008228 1000E7F8 10011820
0FCA902C 00000000
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..

[Tommy]

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670137 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670073 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Do Okt 26 15
:50:20 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:75:c0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: SAMSUNG SV2042H, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970
info, udhcpc (v1.2.1) started
debug, Sending discover...
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
debug, Sending discover...
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is on
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
debug, Sending discover...
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
/share/udhcpc/default.script: exec: 7: /share/udhcpc/sample.leasefail: not found

info, No lease, failing.
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[zapit] PMT update enabled
[getservices] loading motor positions...
[getservices] motor.conf not found.
Oops: kernel access of bad area, sig: 11
NIP: C004A6BC XER: 20000000 LR: C004C0F0 SP: C135FE60 REGS: c135fdb0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 1011B23C, DSISR: C0000000
TASK = c135e000[137] 'timerd' Last syscall: 102
last math 00000000 last altivec 00000000
GPR00: C004C0F0 C135FE60 C135E000 1011B218 00000001 00000000 C135FEE8 7F7F7F7F
GPR08: 00808080 C016504C 00000000 C01FA1D0 24002028 1002D1E4 00000000 30019B54
GPR16: 30019814 10025878 1000FC70 00000004 00009032 0135FF40 00000000 C0002AA8
GPR24: C0002800 C135FEE8 00000000 C017FBE0 FFFFFF9F 00000001 00000004 00000001
Call backtrace:
6B000007 C004C0F0 C00C2AA4 C00C35D0 C00C3684 C00C4514 C000285C
300081F8 0FF8D458 0FFDB04C 0FFDB164 1000FD04 0FE07B84 0FD1D68C
Unhandled interrupt 14, disabled
Oops: kernel access of bad area, sig: 11
NIP: C00D08C4 XER: 20000000 LR: C0016F74 SP: C1C3BE30 REGS: c1c3bd80 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 616E637E, DSISR: C0000000
TASK = c1c3a000[136] 'zapit' Last syscall: 45
last math 00000000 last altivec 00000000
GPR00: 00000000 C1C3BE30 C1C3A000 C0145418 00000005 C0160000 C015A1D0 00068FB0
GPR08: C01454A0 00000004 00000001 C01F9D40 22002024 1003463C C0162438 C0162840
GPR16: 00000000 00000000 00000000 00000000 00001032 01C3BF40 C0000000 C0160000
GPR24: C0160000 C0160000 C0160000 C1C3BE58 00000FAE C0145418 C01F9D44 616E6361
Call backtrace:
C198FA40 C0016F74 C0014F68 C0014DD0 C001498C C0004540 C0002AA0
0FD6C270 0FDC7A5C 0FCD5CD8 0FF14B78 0FF14BF0 0FF14B68 0FF14BF0
0FF14B68 0FF14BF0 0FF14B68 0FF155A0 10008228 1000E7F8 10011820
0FCA902C 00000000
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing

Ich hab mal in Excel eine Vergleichsroutine für zwei Logs gebaut (sowas wollt ich immer schon mal haben ) in dem Log oben, sind alle Unterschiede der beiden geposteten Logs hervorgehoben.

Den DHCP würd ich im Menü mal ausschalten und den HW Sections auch. Achso zum Fehler finden - nfsd (NFS Server) auch erstmal Off

[maccanicu]

Den DHCP würd ich im Menü mal ausschalten und den HW Sections auch. Achso zum Fehler finden - nfsd (NFS Server) auch erstmal Off

ich danke euch allen die mir helfen.

ich habe ausgeschaltet DHCP , HW Section und NFS server , ich glaube etwas wird besser die festplatte wird erkant wie groß sie ist (20gb), aba es gibt noch ein problem weil der reciver hängt noch .


debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670137 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670073 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Do Okt 26 15
:50:20 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:75:c0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: SAMSUNG SV2042H, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39865392 sectors (20411 MB) w/426KiB Cache, CHS=39549/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0:
swapon: Can't stat '/dev/ide/host0/bus0/target0/lun0/part1': No such file or dir
ectory
Thu Jan 1 12:00:00 CET 1970
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
SGI XFS with no debug enabled
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f
ile or directory

/dev/ide/host0/bus0/target0/lun0/disc:
setting standby to 60 (5 minutes)
setting acoustic management to 128
acoustic = 0 (128=quiet ... 254=fast)
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is on
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[getservices] loading motor positions...
[getservices] motor.conf not found.
Oops: kernel access of bad area, sig: 11
NIP: C00C287C XER: 00000000 LR: C00C285C SP: C1389E80 REGS: c1389dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000038, DSISR: C0000000
TASK = c1388000[138] 'timerd' Last syscall: 102
last math 00000000 last altivec 00000000
GPR00: 000000D4 C1389E80 C1388000 00000005 C1389E90 C0124255 00000000 0000000A
GPR08: FFFFFFFF C01FA1D0 00000000 00000000 24002028 1002D1E4 00000000 30019B54
GPR16: 30019814 10025878 1000FC70 00000004 00009032 01389F40 00000000 C0002AA8
GPR24: C0002800 00000014 00000000 C0160000 C11FA1E0 C1389EA0 00000006 C1399660
Call backtrace:
C00C2850 C00C3694 C00C4514 C000285C 300081F8 0FF8D458 0FFDB04C
0FFDB164 1000FD04 0FE07B84 0FD1D68C
Oops: kernel access of bad area, sig: 11
NIP: C004DC08 XER: 00000000 LR: C003F038 SP: C1987E70 REGS: c1987dc0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000008, DSISR: C0000000
TASK = c1986000[136] 'zapit' Last syscall: 195
last math 00000000 last altivec 00000000
GPR00: 00000500 C1987E70 C1986000 00000000 C1C97270 00000003 C1C972CE 00000000
GPR08: C01FA310 00000000 000001FF C01FB500 24002044 1003463C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01987F40 00000000 C0002AA8
GPR24: C0002800 100115E4 00000009 C1987E80 C1987F10 C1F1C005 C1C97270 00000000
Call backtrace:
C003F010 C003FDF0 C003FFE0 C003B9A8 C000285C 100115E4 10008244
1000E7F8 10011820 0FCA902C 00000000
Segmentation fault
Oops: kernel access of bad area, sig: 11
NIP: C004DC08 XER: 00000000 LR: C003F038 SP: C1987E70 REGS: c1987dc0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000008, DSISR: C0000000
TASK = c1986000[140] '[' Last syscall: 195
last math 00000000 last altivec 00000000
GPR00: 00000458 C1987E70 C1986000 00000000 C1C97120 00000003 C1C9717E 00000000
GPR08: C01FA310 00000000 000001FF C01FB458 24002044 10073828 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01987F40 00000000 C0002AA8
GPR24: C0002800 00000003 00000009 C1987E80 C1987F10 C1F12005 C1C97120 00000000
Call backtrace:
C003F010 C003FDF0 C003FFE0 C003B9A8 C000285C 10003CF4 1000FDD8
1000FF70 10010000 100102C8 10010328 10003CDC 10003D58 0FEB502C
00000000
Segmentation fault
Oops: kernel access of bad area, sig: 11
NIP: C004DC08 XER: 00000000 LR: C003F038 SP: C1987E70 REGS: c1987dc0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000008, DSISR: C0000000
TASK = c1986000[141] '[' Last syscall: 195
last math 00000000 last altivec 00000000
GPR00: 00000458 C1987E70 C1986000 00000000 C1C97120 00000003 C1C9717E 00000000
GPR08: C01FA310 00000000 000001FF C01FB458 24002044 10073828 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01987F40 00000000 C0002AA8
GPR24: C0002800 00000003 00000009 C1987E80 C1987F10 C1282005 C1C97120 00000000
Call backtrace:
C003F010 C003FDF0 C003FFE0 C003B9A8 C000285C 10003CF4 1000FDD8
1000FF70 10010000 100102C8 10010328 10003CDC 10003D58 0FEB502C
00000000
Segmentation fault
Oops: kernel access of bad area, sig: 11
NIP: C004C678 XER: 00000000 LR: C0077488 SP: C19877C0 REGS: c1987710 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000004, DSISR: C2000000
TASK = c1986000[142] 'start_neutrino' Last syscall: 11
last math 00000000 last altivec 00000000
GPR00: 000026E0 C19877C0 C1986000 C143ED50 0000001A 00000000 0002B800 00000000
GPR08: 0002B81A 00000000 000007FF C01FE6E0 00002EA4 10073828 C1987C30 C1987C78
GPR16: C1987C40 C1638900 00000000 00000000 00000000 C19878F5 C1F78800 C1987800
GPR24: 00000167 00000000 005A1A77 00000000 C143ED50 00000000 C19877D0 C1F788E4
Call backtrace:
C0076F28 C007ADB0 C003ED1C C003F9BC C003FDF0 C003C3C4 C003D0A8
C0005A00 C000285C 7F7F7F7F 10038014 100397B8 10041788 1003EFEC
1003EFEC 1003EFEC 1003F498 1003FA84 10003CDC 10003D58 0FEB502C
00000000
Segmentation fault
Oops: kernel access of bad area, sig: 11
NIP: C004DC08 XER: 00000000 LR: C003F038 SP: C1987E70 REGS: c1987dc0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000008, DSISR: C0000000
TASK = c1986000[143] '[' Last syscall: 195
last math 00000000 last altivec 00000000
GPR00: 00000458 C1987E70 C1986000 00000000 C1C97120 00000003 C1C9717E 00000000
GPR08: C01FA310 00000000 000001FF C01FB458 24002044 10073828 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01987F40 00000000 C0002AA8
GPR24: C0002800 00000003 00000009 C1987E80 C1987F10 C125E005 C1C97120 00000000
Call backtrace:
C003F010 C003FDF0 C003FFE0 C003B9A8 C000285C 10003CF4 1000FDD8
1000FF70 10010000 100102C8 10010328 10003CDC 10003D58 0FEB502C
00000000
Segmentation fault
[sectionsd] getUTC: read: Connection timed out
Oops: kernel access of bad area, sig: 11
NIP: C004DC08 XER: 00000000 LR: C003F038 SP: C1515E30 REGS: c1515d80 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 4BFFFC54, DSISR: C0000000
TASK = c1514000[127] 'sectionsd' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00000CA8 C1515E30 C1514000 00000000 C01F56D0 00000003 C01F572E 00000000
GPR08: C01FA310 4BFFFC4C 000001FF C01FBCA8 24002044 1005326C 00000000 30019834
GPR16: 300194F4 00000000 10005A6C 00000004 00009032 01515F40 00000000 C0002AA8
GPR24: C0002800 00000006 00000001 C1515E40 C1515EF0 C150F005 C01F56D0 00000000
Call backtrace:
C003F010 C003FDF0 C00401D0 C0031FD0 C003223C C000285C 0FE21388
10021F90 10005B48 0FE1AB84 0FD3068C

[Tommy]

irgendwie scheint der sectionsd die Box abzuschießen (zumindest gibt er die letzten Meldungen) Danach müßte die camd2 starten. Welches image hast Du jetzt drauf? Hast Du irgendwas an der camd2 gefummelt? Vom IDE IF scheint der Fehler jedenfalls nicht zu kommen!

[maccanicu]

irgendwie scheint der sectionsd die Box abzuschießen (zumindest gibt er die letzten Meldungen) Danach müßte die camd2 starten. Welches image hast Du jetzt drauf? Hast Du irgendwas an der camd2 gefummelt? Vom IDE IF scheint der Fehler jedenfalls nicht zu kommen!

die immage ist JTG v2.2.2 von 26.10.2006.

um nicht angemozzt zu werden in dieser image hab ich nur setting(kanalliste) , und ucode reinemacht ansonsten habe ich nichts reingemacht , es gibt keine camd, k*y, emu usw. usw.

[Tommy]

kann es sein das an der kanalliste was faul ist? Probiere mal das JTG OHNE das Du irgendeine Veränderung daran vornimmst. Es darf auch ruhig ein etwas neuerer Snapshoot sein ;-)

[maccanicu]

ich danke euch allen , aba ich ich mach nicht mehr weiter , die IF werde ich wider nacht italien schiken zum besitzer .

die IF wurde mir geschikt aus italien weil sie immer das selbe problem hatten
und sie können keine detusch lesen sie hatten gedacht sie haben ein fehler gemacht weil der reciver mit IF macht kein boot .

ich habe alles versucht : nue image reingemacht , " JTG v2.2.2 von 26.10.2006 " , (aba das problem ist mit jeder image ) automatisch sender suchen gelasen , ucode muss rein machen , aba es gibt immer das problem wenn das ide-interface zusammen schraube der reciver bootet nicht mehr wen ich es raus mache geht der reciver wieder( mit jeden image) .

ich glaube ist es ein problem des IF

tschüs