moinsen
Also die neue Yadd installiert und fährt hoch, dann die Meldung
keine Sender gefunden >> Transponderscan .
Ist ja klar und ok. Aber der Transponderscan müsste doch eigentlich auch bei der Yadd funktionieren.
Wollte dann manuell kopieren, aber :
Image : var/tuxbox/config
bei mir Yadd : D:\yadd2\cdkroot\var\tuxbox\config\zapit
ist die Stelle richtig? Schon lange keine Yadd mehr benutzt.
Ucodes und so ist alles da. Und ich habe eine Philips.
Ich probier mal weiter.
mfg
Yadd macht keinen Transponderscan
-
airwave27
- Einsteiger
- Beiträge: 143
- Registriert: Montag 3. September 2001, 00:00
-
chkdesign
- Senior Member
- Beiträge: 1544
- Registriert: Freitag 12. Oktober 2001, 00:00
-
airwave27
- Einsteiger
- Beiträge: 143
- Registriert: Montag 3. September 2001, 00:00
Also da steht immer
zapitclient: connect: Connection refused
Und eingelesen werden die Listen auch.
Hmm
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-ec.9c.c4.07.00.00-b2
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.7.4, My IP 192.168.7.123
debug: Sending TFTP-request for file D/yadd2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201852
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 28 2002 - 20:04:24)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2a-cd-28
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.7.4; our IP address is 192.168.7.123
Filename 'D/yadd2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 685319 Bytes = 669 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (wild@p200) (gcc version 3.0.4) #1 Fre Mr 29 14:22:52 CET 20
02
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.7.4:D/yadd2/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.7.4:D/yadd2/
cdkroot/
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30412k available (1248k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20104kB/6701kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:2a
28
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.7.4, my address is 192.168.7.123
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.7.4
Looking up port of RPC 100005/2 on 192.168.7.4
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call Bad inittab en
try: ::restart:/sbin/init
Real Time Clock Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
mice: PS/2 mouse device common for all mice
Loading /share/keymaps/i386/qwertz/de.kmap.gz
Couldnt get a file descriptor referring to the console
event: init ...
Init TDA8044H
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
[FONT] initializing core...AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 hap
pydude Exp $
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
registering device.
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.o: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
registering frontend...
sync: 00
enx-core: Loaded AViA eNX core driver
gen_dmx: found enx
ENX-INITed -> 0
there MIGHT be no TS
avia_vbi: version (Mar 30 2002-10:41:23)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: enx_capture.c,v 1.4 2001/12/01 06:37:06 gillem Exp $
Network LCD-Driver $Id: lcdd.cpp,v 1.43 2002/03/18 00:02:57 McClean Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial.ttf...sync: 00
OK (Arial/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
$Id: sectionsd.cpp,v 1.109 2002/03/29 15:47:18 obi Exp $
caching 96 hours
events are old 60min after their end time
dmxdev: set buffer size 40000 -> 60000
$Id: zapit.cpp,v 1.111 2002/03/29 15:09:14 obi Exp $
cp: /var/tuxbox/config/zapit/last_chan: No such file or directory
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
[zapit] CAID is: 1702
[zapit] scanning a satellite section
[zapit] going to parse satellite Astra 19.2E
dmxdev: set buffer size 40000 -> 60000
[zapit] reading Bouquets ...........................
[zapit] Found 28 bouquets.
dmxdev: set buffer size 40000 -> 60000
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.57 2002/03/29 15:47:18 obi Exp $
[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
lcddclient: connect: Connection refused
lcddclient: connect: Connection refused
SWITCH LETTER BOX
[nhttpd] Neutrino HTTP-Server starting..
zapitclient: connect: Connection refused
zapitclient: connect: Connection refused
httpd gestartet
dmxdev: set buffer size 40000 -> 60000
NeutrinoNG $Id: neutrino.cpp,v 1.209 2002/03/30 13:25:55 Simplex Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supported
controldclient: connect: Connection refused
enable flash
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
doing network setup...
IP : 192.168.7.123controldclient: connect: Connection refused
controldclient: connect: Connectcontroldclient: connect: Connection refusedzapit
client: connect: Connectionzapitclient: connect: Connection zapitclient: connect
: Connectionzapitclient: connect: Connectiondmxdev: set buffer size 40000 -> 600
00
zapitclient: connect: Connection refused
zapitclient: connect: Connectionzapitclient: connect: Connection refuseddmxdev:
set buffer size 40000 -> 60000
controldclient: connect: Connection refused
controldclient: connect: Connectlcddclient: connect: Connection refused
lcddclient: connect: Connection refused
lcddclient: connect: Connection refusedlcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection refused
lcddclient: connect: Connection rdmxdev: set buffer size 40000 -> 60000
lcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection rdmxdev: set buffer size 40000 -> 60000
sync: 00
zapitclient: connect: Connection refused
sync: 00
mfg
zapitclient: connect: Connection refused
Und eingelesen werden die Listen auch.
Hmm
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-ec.9c.c4.07.00.00-b2
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.7.4, My IP 192.168.7.123
debug: Sending TFTP-request for file D/yadd2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201852
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 28 2002 - 20:04:24)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2a-cd-28
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.7.4; our IP address is 192.168.7.123
Filename 'D/yadd2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 685319 Bytes = 669 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (wild@p200) (gcc version 3.0.4) #1 Fre Mr 29 14:22:52 CET 20
02
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.7.4:D/yadd2/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.7.4:D/yadd2/
cdkroot/
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30412k available (1248k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20104kB/6701kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:2a
28JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.7.4, my address is 192.168.7.123
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.7.4
Looking up port of RPC 100005/2 on 192.168.7.4
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call Bad inittab en
try: ::restart:/sbin/init
Real Time Clock Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
mice: PS/2 mouse device common for all mice
Loading /share/keymaps/i386/qwertz/de.kmap.gz
Couldnt get a file descriptor referring to the console
event: init ...
Init TDA8044H
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
[FONT] initializing core...AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 hap
pydude Exp $
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
registering device.
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.o: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
registering frontend...
sync: 00
enx-core: Loaded AViA eNX core driver
gen_dmx: found enx
ENX-INITed -> 0
there MIGHT be no TS
avia_vbi: version (Mar 30 2002-10:41:23)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: enx_capture.c,v 1.4 2001/12/01 06:37:06 gillem Exp $
Network LCD-Driver $Id: lcdd.cpp,v 1.43 2002/03/18 00:02:57 McClean Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial.ttf...sync: 00
OK (Arial/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
$Id: sectionsd.cpp,v 1.109 2002/03/29 15:47:18 obi Exp $
caching 96 hours
events are old 60min after their end time
dmxdev: set buffer size 40000 -> 60000
$Id: zapit.cpp,v 1.111 2002/03/29 15:09:14 obi Exp $
cp: /var/tuxbox/config/zapit/last_chan: No such file or directory
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
[zapit] CAID is: 1702
[zapit] scanning a satellite section
[zapit] going to parse satellite Astra 19.2E
dmxdev: set buffer size 40000 -> 60000
[zapit] reading Bouquets ...........................
[zapit] Found 28 bouquets.
dmxdev: set buffer size 40000 -> 60000
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.57 2002/03/29 15:47:18 obi Exp $
[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
lcddclient: connect: Connection refused
lcddclient: connect: Connection refused
SWITCH LETTER BOX
[nhttpd] Neutrino HTTP-Server starting..
zapitclient: connect: Connection refused
zapitclient: connect: Connection refused
httpd gestartet
dmxdev: set buffer size 40000 -> 60000
NeutrinoNG $Id: neutrino.cpp,v 1.209 2002/03/30 13:25:55 Simplex Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supportedcontroldclient: connect: Connection refused
enable flash
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
doing network setup...
IP : 192.168.7.123controldclient: connect: Connection refused
controldclient: connect: Connectcontroldclient: connect: Connection refusedzapit
client: connect: Connectionzapitclient: connect: Connection zapitclient: connect
: Connectionzapitclient: connect: Connectiondmxdev: set buffer size 40000 -> 600
00
zapitclient: connect: Connection refused
zapitclient: connect: Connectionzapitclient: connect: Connection refuseddmxdev:
set buffer size 40000 -> 60000
controldclient: connect: Connection refused
controldclient: connect: Connectlcddclient: connect: Connection refused
lcddclient: connect: Connection refused
lcddclient: connect: Connection refusedlcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection refused
lcddclient: connect: Connection rdmxdev: set buffer size 40000 -> 60000
lcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection refused
lcddclient: connect: Connection rlcddclient: connect: Connection refused
lcddclient: connect: Connection rdmxdev: set buffer size 40000 -> 60000
sync: 00
zapitclient: connect: Connection refused
sync: 00
mfg