Ich versuche seit tagen meine Sagem dbox2 1xI zu flashen...
Aber irgendwie will die box nicht...
vll kann mir ja jemand nen Tip geben was ich falsch mache oder was mit der box nicht stimmt...
FW und AV ist aus...
Netzwerkkarte ist umgestelt auf 10MBit Half duplex
Anschluß an die box mit Crossover und Nullmodemkabel...
Hier mal der LOG aus dem Bootmanager:
Netzwerkaktivität:
***Adapter Desc: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC - Paketplaner-Miniport (via IpHlpApi #0)
***MAC address: 00:30:84:76:BD:83 Local IP: 192.168.1.5
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.27 with MAC 00:50:9C:3C:F0:92
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 432 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.27 with MAC 00:50:9C:3C:F0:92
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.27 with MAC 00:50:9C:3C:F0:92
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.27 with MAC 00:50:9C:3C:F0:92
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1204 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.1.27 with MAC 00:50:9C:3C:F0:92
BootP> Answer sent!
1 - mountd: mount: path: C/yadd/cdkroot/
COM-Terminal:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-30.1b.0a.08.00.00-e2
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata 0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.5, My IP 192.168.1.27
debug: Sending TFTP-request for file C/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 221120
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Nov 1 2001 - 22:08:07)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3c-f0-92
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'C/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FE0E78 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'C/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FE0E78 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: tiab
3: flash
4: test2
Select image (1-4), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'C/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
##################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 616213 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.2 20010903 (prer
elease)) #1 Thu Nov 1 22:44:05 CET 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.5:C/yadd/cdkroo
t/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.5:C/yadd/c
dkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:3c:f0:92
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.1.5, my address is 192.168.1.27
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.1.5
Looking up port of RPC 100005/2 on 192.168.1.5
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k int
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.07.23-21:34+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
Starting inetd
Setting hostname
sh: /bin/hostname: No such file or directory
Lade module
Lade i2c-core
i2c-core.o: i2c core module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 41
fpREV: 23
DEMOD: AT76C651
Lade soundcore
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
avia_core.c: do_firmread: Firmware wrong size '/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade enx_core
enx-core: Loaded AViA eNX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
Lade at76c651
/lib/modules/2.4.2/misc/at76c651.o: unresolved symbol register_demod
/lib/modules/2.4.2/misc/at76c651.o: unresolved symbol unregister_demod
Lade enx_dmx
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol register_demux
Lade enx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
Setting up loopback device
Using /lib/modules/2.4.2/misc/lcd.o
lcd.o: LCD driver (KS0713) module
StartMenu dbox2 Linux Projekt
2001 by Andre Paul
Starte /etc/init.d/start_neutrino_zapit...
Please press Enter to activate this console. Lade sectionsd
$Id: sectionsd.cpp,v 1.82 2001/11/05 17:12:05 field Exp $
caching 120 hours
events are old 60min after their end time
Lade zapit
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
killall: camd: no process killed
sh: tcsetpgrp: Inappropriate ioctl for device
Zapit $Id: zapit.cpp,v 1.28 2001/11/03 16:27:50 field Exp $
[zapit] fopen: /var/zapit/last_chan: No such file or directory
[zapit] open ca0: No such file or directory
[zapit] scanning a satellite section
[zapit] going to parse satellite Astra 19.2E
[zapit] channels have been loaded succesfully
[zapit] we have got 374 tv- and 113 radio-channels
[zapit] _writecam: open ca0: Bad file descriptor
Lade lcd
insmod: a module named lcd already exists
Lade lcdd
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Lade controld
Controld 0.1
[controld] error while loading settings: /var/controld.conf
[controld] useing defaults
[controld] set volume: 0
Starting BOA
Starte Neutrino
NeutrinoNG $Id: neutrino.cpp,v 1.76 2001/11/05 16:04:25 field Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supportedUsing zapit
error while loading settings: /var/neutrino.conf
using defaults...
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial Black/Regular)
[zapit] fopen: /var/zapit/last_chan: No such file or directory
Changed to TV-mode
All channels received
[zapit] Cannot open video device "/dev/ost/qpskfe0"
CRemoteControl::RemoteControlThread - Nothing could be received from serverd zap
it
: Success
Unknown return-code ><, 0
query epg for onid_tsid >85002e< (SAT.1)
query epg for onid_tsid >85002e< (SAT.1)
query epg for onid_tsid >85002e< (SAT.1)
query epg for onid_tsid >85002e< (SAT.1)
[controld] Command received
[controld] Version: 1
[controld] Command: 128
[controld] Param: 0
[controld] Param2: 0
[controld] Param3:
[controld] get volume
getting volume: 100
sending volume: 100
[controld] Command received
[controld] Version: 1
[controld] Command: 2
[controld] Param: 100
[controld] Param2: 0
[controld] Param3:
[controld] set volume
[controld] set volume: 0
query epg for onid_tsid >85002e< (SAT.1)
Nach dem query epg for onid_tsid >85002e< (SAT.1) passiert nix mehr...
was kann das sein????????
LG
