Philips startet immer wieder neu

Wie blitze ich ein Bild - Permanent Outgoing Incomes
joe11
Interessierter
Interessierter
Beiträge: 90
Registriert: Donnerstag 2. März 2006, 16:03

Philips startet immer wieder neu

Beitrag von joe11 »

Hallo,

hab da eine Philips die immer wieder Neustartet. 2 Balken Lade.....immer wieder
Mit dem Flash Assi gehts nicht.

Hier mal ein log:

GPR00: F3014C50 01F9FEC0 00000000 01F9FED8 01F9FED8 01F9FEE6 01F9FF00 00000000
GPR08: 01FD8E50 01FD8D3C 01FD8E18 01FD8DD0 00000000 00032724 01FE7100 01F80000
GPR16: 10000001 00000000 00000009 00100001 7DD04000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FC0000 01F80000 01F9FFC0 F4FE7760 01FE0EA4
Call backtrace:
01FDFB84 01FD2ADC 01FD2B98 01FCC5B0 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-36-2f
FLASH: 8 MB
Bus Fault @ 0x01fd2b28, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdd0 Unknown values in msr
NIP: 01FD2B28 XER: A000843D LR: 01FD2B10 REGS: 01f9fdd0 TRAP: 0200 DAR: 00000001

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: F3014C50 01F9FEC0 00000000 01F9FED8 01F9FED8 01F9FEE6 01F9FF00 00000000
GPR08: 01FD8E50 01FD8D3C 01FD8E18 01FD8DD0 00000000 00032724 01FE7100 01F80000
GPR16: 10000001 00000000 00000009 00100001 7DD04000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FC0000 01F80000 01F9FFC0 F4FE7760 01FE0EA4
Call backtrace:
01FDFB84 01FD2ADC 01FD2B98 01FCC5B0 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0
debug: WATCHDOG RESET
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 00 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.4
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-36-2f
FLASH: 8 MB
Bus Fault @ 0x01fd2b28, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdd0 Unknown values in msr
NIP: 01FD2B28 XER: A000843D LR: 01FD2B10 REGS: 01f9fdd0 TRAP: 0200 DAR: 00000001

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: F3014C50 01F9FEC0 00000000 01F9FED8 01F9FED8 01F9FEE6 01F9FF00 00000000
GPR08: 01FD8E50 01FD8D3C 01FD8E18 01FD8DD0 00000000 00032724 01FE7100 01F80000
GPR16: 10000001 00000000 00000009 00100001 7DD04000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FC0000 01F80000 01F9FFC0 F4FE7760 01FE0EA4
Call backtrace:
01FDFB84 01FD2ADC 01FD2B98 01FCC5B0 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0
debug: WATCHDOG RESET
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 00 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.4
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-36-2f
FLASH: 8 MB
Bus Fault @ 0x01fd2b28, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdd0 Unknown values in msr
NIP: 01FD2B28 XER: A000843D LR: 01FD2B10 REGS: 01f9fdd0 TRAP: 0200 DAR: 00000001

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: F3014C50 01F9FEC0 00000000 01F9FED8 01F9FED8 01F9FEE6 01F9FF00 00000000
GPR08: 01FD8E50 01FD8D3C 01FD8E18 01FD8DD0 00000000 00032724 01FE7100 01F80000
GPR16: 10000001 00000000 00000009 00100001 7DD04000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FC0000 01F80000 01F9FFC0 F4FE7760 01FE0EA4
Call backtrace:
01FDFB84 01FD2ADC 01FD2B98 01FCC5B0 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0
debug: WATCHDOG RESET
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 00 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.4
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-36-2f
FLASH: 8 MB
Bus Fault @ 0x01fd2b28, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdd0 Unknown values in msr
NIP: 01FD2B28 XER: A000843D LR: 01FD2B10 REGS: 01f9fdd0 TRAP: 0200 DAR: 00000001

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: F3014C50 01F9FEC0 00000000 01F9FED8 01F9FED8 01F9FEE6 01F9FF00 00000000
GPR08: 01FD8E50 01FD8D3C 01FD8E18 01FD8DD0 00000000 00032724 01FE7100 01F80000
GPR16: 10000001 00000000 00000009 00100001 7DD04000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FC0000 01F80000 01F9FFC0 F4FE7760 01FE0EA4
Call backtrace:
01FDFB84 01FD2ADC 01FD2B98 01FCC5B0 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 00 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.4
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-36-2f
FLASH: 8 MB
Bus Fault @ 0x01fd2b28, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdd0 Unknown values in msr
NIP: 01FD2B28 XER: A000843D LR: 01FD2B10 REGS: 01f9fdd0 TRAP: 0200 DAR: 00000001

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: F3014C50 01F9FEC0 00000000 01F9FED8 01F9FED8 01F9FEE6 01F9FF00 00000000
GPR08: 01FD8E50 01FD8D3C 01FD8E18 01FD8DD0 00000000 00032724 01FE7100 01F80000
GPR16: 10000001 00000000 00000009 00100001 20004000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FC0000 01F80000 01F9FFC0 F4FE7760 01FE0EA4
Call backtrace:
01FDFB84 01FD2ADC 01FD2B98 01FCC5B0 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-36-2f
FLASH: 8 MB
Bus Fault @ 0x01fd2b28, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdd0 Unknown values in msr
NIP: 01FD2B28 XER: A000843D LR: 01FD2B10 REGS: 01f9fdd0 TRAP: 0200 DAR: 00000001

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: F3014C50 01F9FEC0 00000000 01F9FED8 01F9FED8 01F9FEE6 01F9FF00 00000000
GPR08: 01FD8E50 01FD8D3C 01FD8E18 01FD8DD0 00000000 00032724 01FE7100 01F80000
GPR16: 10000001 00000000 00000009 00100001 20004000 00000001 00000000 00002580
GPR24: FF002FC0 01FC0000 01F9FF40 01FC0000 01F80000 01F9FFC0 F4FE7760 01FE0EA4
Call backtrace:
01FDFB84 01FD2ADC 01FD2B98 01FCC5B0 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-36-2f
FLASH: 8 MB
Bus Fault @ 0x01fd2b28, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fdd0 Unknown values in msr
NIP: 01FD2B28 XER: A000843D LR: 01FD2B10 REGS: 01f9fdd0 TRAP: 0200 D

Was mir aufgefallen ist, das flash reset nicht geht, d. h. sobald die box am strom ist läuft der bootlog, drücke ich power und pfeil nach oben läuft der bootlog weiter obwohl das display aus ist?
JtG-Riker
Image-Team
Beiträge: 1015
Registriert: Freitag 7. Februar 2003, 18:37

Re: Philips startet immer wieder neu

Beitrag von JtG-Riker »

starte die box ma mit Pfeil nach oben und poste dann die Ausgabe vom RAMtest

Ansonsten Tippe ich auf CPU/RAM

Gruß Riker
joe11
Interessierter
Interessierter
Beiträge: 90
Registriert: Donnerstag 2. März 2006, 16:03

Re: Philips startet immer wieder neu

Beitrag von joe11 »

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: failed at 0x19f0afc
debug: MarchTest: debug: failed at 0x1fffb00
debug: PermTest: debug: passed
dbox2:root>

Die Box bleibt nun bei einem Balken steh.

Mach ich nun einen Fash Reset Pfeil nach oben und die Power Taste läuft sie trotzdem im Com-terminal:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WARNING: unsupported FP ID 0x0

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: failed at 0x18d22fc
debug: MarchTest: debug: failed at 0x1fffb00
debug: PermTest: debug: passed
dbox2:root> debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-84.23.8f.07.00.00-84
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: failed at 0x18af2fc
debug: MarchTest: debug: failed at 0x1fffb00
debug: PermTest: debug: failed at 0x1800000
dbox2:root>
JtG-Riker
Image-Team
Beiträge: 1015
Registriert: Freitag 7. Februar 2003, 18:37

Re: Philips startet immer wieder neu

Beitrag von JtG-Riker »

Jo sieht nach RAM aus.

Kannst du bei Hallenberg.com oder dbox2.com für ~30 Euro tauschen lassen.

Gruß Riker
joe11
Interessierter
Interessierter
Beiträge: 90
Registriert: Donnerstag 2. März 2006, 16:03

Re: Philips startet immer wieder neu

Beitrag von joe11 »

Danke, ich schick sie zu Hallenberg