make ezap fails...

[casi]

habe cdk ganz neu runtergeladen und will ein make all machen....
bricht mit folgender fehlermessage ab:

$ make all
make -C /home/Stefan/tuxbox-cvs/apps/edvb all install
make[1]: Entering directory `/home/Stefan/tuxbox-cvs/apps/edvb'
Making all in miniqt
make[2]: Entering directory `/home/Stefan/tuxbox-cvs/apps/edvb/miniqt'
make[2]: Nothing to be for `all'.
make[2]: Leaving directory `/home/Stefan/tuxbox-cvs/apps/edvb/miniqt'
Making all in xml
make[2]: Entering directory `/home/Stefan/tuxbox-cvs/apps/edvb/xml'
make[2]: Nothing to be for `all'.
make[2]: Leaving directory `/home/Stefan/tuxbox-cvs/apps/edvb/xml'
Making all in si
make[2]: Entering directory `/home/Stefan/tuxbox-cvs/apps/edvb/si'
make[2]: Nothing to be for `all'.
make[2]: Leaving directory `/home/Stefan/tuxbox-cvs/apps/edvb/si'
make[2]: Entering directory `/home/Stefan/tuxbox-cvs/apps/edvb'
make[2]: *** No rule to make target `miniqt/libminiqt.a', needed by `ezap'. Sto
p.
make[2]: Leaving directory `/home/Stefan/tuxbox-cvs/apps/edvb'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/Stefan/tuxbox-cvs/apps/edvb'
make: *** [.edvb] Error 2

wie kann ich das beheben????
danke.

[casi]

fehler im edvb make file?????
libminiqt.a -> libminiqt.la ??????

[casi]

dasselbe bei enigma...

[Flagg]

Ich hab den gleichen Fehler:

make -C /home/tuxbox-cvs/apps/edvb all install
make[1]: Entering directory `/home/tuxbox-cvs/apps/edvb'
Making all in miniqt
make[2]: Entering directory `/home/tuxbox-cvs/apps/edvb/miniqt'
make[2]: Nothing to be for `all'.
make[2]: Leaving directory `/home/tuxbox-cvs/apps/edvb/miniqt'
Making all in xml
make[2]: Entering directory `/home/tuxbox-cvs/apps/edvb/xml'
make[2]: Nothing to be for `all'.
make[2]: Leaving directory `/home/tuxbox-cvs/apps/edvb/xml'
Making all in si
make[2]: Entering directory `/home/tuxbox-cvs/apps/edvb/si'
make[2]: Nothing to be for `all'.
make[2]: Leaving directory `/home/tuxbox-cvs/apps/edvb/si'
make[2]: Entering directory `/home/tuxbox-cvs/apps/edvb'
make[2]: *** No rule to make target `miniqt/libminiqt.a', needed by `ezap'. Sto
p.
make[2]: Leaving directory `/home/tuxbox-cvs/apps/edvb'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/tuxbox-cvs/apps/edvb'
make: *** [.edvb] Error 2

[rasc]

cvs updaten, hat obi gefixt

[casi]

habs upgedated...
jetzt kommen die compile fehler nicht mehr
habe auch alle gtx....o geloescht und pcm.o (habe ne enx-box)
wenn ich aber einen kanal-scan machen, denn
findet er 3 transponder, 15 services
und displayed dann die message: Es wurden keine Kanäle gefunden!

was mach ich da??????
danke.
p.s.
die erstellte services.xml sieht so aus:
<?xml version="1.0" encoding="iso-8859-1"?>
<zapit>
<satellite name="Astra 19.2E" diseqc="0">
<transponder transportID="0423">
<sat frequency="10861000" symbolRate="22000000" fec="4" polarity="0"/>
<channel ServiceID="1c7b" name="MM-ENG 01" onid="0001" serviceType="000c" channelNR="0"/>
<channel ServiceID="1c7c" name="MM-ENG 02" onid="0001" serviceType="000c" channelNR="0"/>
<channel ServiceID="1c7d" name="MM-ENG 03" onid="0001" serviceType="000c" channelNR="0"/>
<channel ServiceID="1c7e" name="MM-ENG 04" onid="0001" serviceType="000c" channelNR="0"/>
<channel ServiceID="1c7f" name="MM-ENG 05" onid="0001" serviceType="000c" channelNR="0"/>
<channel ServiceID="1c80" name="MM-ENG 06" onid="0001" serviceType="000c" channelNR="0"/>
<channel ServiceID="7469" name="FLS Kokua Platform" onid="0001" serviceType="000f" channelNR="0"/>
<channel ServiceID="746a" name="Kokua Communications" onid="0001" serviceType="000c" channelNR="0"/>
<channel ServiceID="746e" name="MMT Kokua Platform" onid="0001" serviceType="000f" channelNR="0"/>
</transponder>
<transponder transportID="0424">
<sat frequency="10876000" symbolRate="22000000" fec="4" polarity="1"/>
<channel ServiceID="0020" name="BBI RCS Map Service" onid="0019" serviceType="000e" channelNR="0"/>
<channel ServiceID="0021" name="BBI FLS Service" onid="0019" serviceType="000f" channelNR="0"/>
<channel ServiceID="0031" name="BBI MPE IP Service" onid="0019" serviceType="000c" channelNR="0"/>
</transponder>
<transponder transportID="0460">
<sat frequency="12728000" symbolRate="22000000" fec="4" polarity="1"/>
<channel ServiceID="177b" name="BBI RCS Map Table" onid="0019" serviceType="000e" channelNR="0"/>
<channel ServiceID="177c" name="BBI FLS Service" onid="0019" serviceType="000f" channelNR="0"/>
<channel ServiceID="177d" name="BBI MPE&MMT" onid="0019" serviceType="000c" channelNR="0"/>
</transponder>
</satellite>
</zapit>


und hier ist der trace:
[nit.cpp] read: Connection timed out
sync: 22
setting freq 1111000
sync: a0
[tune.cpp] poll timeout
[scan.cpp] GETTING SDT FOR TSID:sync: 1f
acquired full sync, found FEC: 5/6, no spectral inversion
sync: 1f
tuner locked
setting symbolrate: 22000000
fec: 04
01 00 8b a2 e9 23 00 08 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 1f
[sdt.cpp] transport_stream_id: 0423
provider: SES Multimedia S.A.[sdt.cpp] service_id: 1c7c
provider: SES Multimedia S.A.[sdt.cpp] service_id: 7469
provider: ASTRA Broadband Interaprovider: ASTRA Broadband Interactive Systemsett
ing freq 1126000
sync: 81
[scan.cpp] GETTING SDT FOR TSID: 0424
sync: 01
loop open, lock acquired, closing loop.
sync: 1f
acquired full sync, found FEC: 5/6, no spectral inversion
sync: 1f
[sdt.cpp] transport_stream_id: 0[sdt.cpp] original_network_id: 0provider: ASTRA
BBI System
tuner locked
[sdt.cpp] service_id: 0021
provider: ASTRA BBI Systemsetting freq 2128000
sync: 85
[scan.cpp] GETTING SDT FOR TSID: 0460
sync: 1f
acquired full sync, found FEC: 5/6, no spectral inversion
tuner locked
[sdt.cpp] transport_stream_id: 0460
provider: ASTRA BBI System[sdt.cpp] service_id: 177b
[sdt.cpp] service_id: 177d[zapit] leavin bouquets.xml untouched
[getservices.cpp] scanning a satellite section
[getservices.cpp] going to parse[zapit] /var/tuxbox/config/zapit/bouquets.xml: N
o such file or didmxdev: set buffer size 40000 -> 60000

All bouquets-channels received