uclibc patch

dwilx · Beitrag von **dwilx** » Mittwoch 8. Oktober 2008, 19:42

Falls ich mich jetzt zu weit aus dem Fenster lehnen sollte, gleich sorry vorab, aber ich denke die libs müssten doch eigentlich ok sein. Sollte nicht besser mklibs.py angepasst werden? Nur angenommen, dass die überhaupt nicht dazu passt. "duck"

Beitrag von **dietmarw** » Mittwoch 8. Oktober 2008, 21:35

rhabarber1848 hat geschrieben:...
Die nächste Version...
.

<--

hab auf meinen mirrors unter div_tests mal ergebnisse abgelegt..

rhabarber1848 hat geschrieben:Hier der aktuelle uClibc-Patch: uclibc.diff

Changelog:
- (09.10.2008): wegen veralteter ./configure oder unvollständiger libjpeg.la.in bauten libjpeg, freetype, curl, libdvbpsi, expat, libffi, libfribidi, libxml2, lirc, SDL, libmad und libid3tag keine dynamischen Libraries, deren Funktionen wurden statisch gelinkt, z.B. in Neutrino. Dadurch wurde das Image ca. 500kb größer, Problem behoben

Ein wichtiges Update

Die root-Partition eines uClibc-Squashfs-Images ist nun 156kb kleiner als in einem vergleichbaren glibc-Image.

Beitrag von **Striper** » Freitag 10. Oktober 2008, 09:20

Moin rhabarber1848, jetzt muss ich hier mal ganz blöd fragen ob --enable-uclibc auch irgendwelche Nachteile bringt oder etwas nicht lauffähig ist dann? Mal eben 156kb kleiner klingt ja echt gut. Und was bringt das ganze bei reinen JFF2 Images?

Striper hat geschrieben:ob --enable-uclibc auch irgendwelche Nachteile bringt

Aus meiner To-Do-Liste ist ersichtlich, dass weder die XFS-Dateisystemtools,
FLAC-Audiounterstützung noch Enigma z.Zt. in einem uClibc-Image funktionieren.
Gleiches gilt für Plugins, die Binaries wie msgbox mitbringen. Diese Binaries sind
gegen glibc gelinkt und können in einem uClibc-Image nicht funktionieren.
Die Plugin-Autoren müssen diese Plugins neu mit uClibc kompilieren.
Bis auf die o.g. Ausnahmen wird ein Neutrino-Image mit uClibc aber genauso
funktionieren wie eines, das gegen glibc gelinkt ist.

Striper hat geschrieben:Und was bringt das ganze bei reinen JFF2 Images?

Probier es doch einfach aus, die uClibc-gelinkten Binaries sind etwas kleiner,
auch in einem unkomprimierten JFF2-Image.

@all: Wichtig wäre aber, den uclibc-Patch mit einem glibc-Image zu testen.
Damit soll sichergestellt werden, dass die uClibc-Unterstützung keine
unerwünschten Nebenwirkungen zeigt.

Beitrag von **dietmarw** » Freitag 10. Oktober 2008, 11:40

rhabarber1848 hat geschrieben:...
Die root-Partition eines uClibc-Squashfs-Images ist nun 156kb kleiner als in einem vergleichbaren glibc-Image.

mal ehrlich..
in einem squashfs image ist eh schon 2-4 mb für var verfügbar,
lohnt der aufwand für 156 kb??

dietmarw hat geschrieben:lohnt der aufwand für 156 kb??

Ich mache das aus Spass am Basteln, nicht wegen ein paar KB

Wobei es schon einige Argumente für ein uClibc-Image gibt:
http://forum.tuxbox-cvs.sourceforge.net ... 88#p343688

zaphot hat geschrieben:neutrino lässt sich aber deutlich schneller bedienen

http://forum.tuxbox-cvs.sourceforge.net ... 84#p344284

jochenf hat geschrieben:Mit ulibc hat man aber einen definierten Stand der libc. Dadurch kann man die Tuxbox per ipkg modularisieren

weil
http://forum.tuxbox-cvs.sourceforge.net ... 40#p343640

zaphot hat geschrieben:leider lassen sich die uclibc libs nicht mit mklibs verkleinern, da sie dadurch aus bisher noch unbekanten Gründen kaputt gehen. Deswegen werden die libs komplett kopiert.

Ein erster Schritt Richtung ipkg ist hier: http://forum.tuxbox-cvs.sourceforge.net ... 18&t=46705

Dazu noch ein netter Nebeneffekt

http://forum.tuxbox-cvs.sourceforge.net ... 70#p360970

seife hat geschrieben:Eigentlich ist das ein cooles debugging-Feature von uclibc, dass die Programme einem um die Ohren fliegen wenn das Locking unsauber programmiert ist...

Ich habe uclibc.diff nun in zwei Patches aufgeteilt, zum einen den eigentlichen uclibc-Patch,
der die neue ./configure-Option --enable-uclibc und die nötigen Änderungen im build-System
bereitstellt und zweiten einen Patch, der für einige Pakete uclibc-Kompilierpatches bereitstellt
und einige Kleinigkeiten aufräumt, die mit uClibc nicht direkt zu tun haben.

Diesen zweiten Patch möchte ich bereits jetzt gerne im CVS sehen, einerseits um den
eigentlichen uclibc-Patch übersichtlicher zu gestalten, andererseits, weil diese Patches
den glibc-Betrieb nicht beeinträchtigen: EDIT: Patch ist im CVS

Kurze Erklärung der Patchbestandteile:

cdk/make/buildenv.mk
- Vorbereitung für CFLAGS="$(TARGET_CFLAGS) -fPIC" in $(BUILDENV_LIBS)

cdk/make/contrib-libs.mk
- Patch-depends sind nun in rules-make
- Vorbereitung für $(BUILDENV_LIBS)

cdk/make/linuxkernel.mk
- if KERNEL26-Bedingung überflüssig, es wird immer der gleiche Code ausgeführt

cdk/Patches/autofs.diff
- uClibc-Kompilierpatch, uClibc kann kein YP, wenn in libc vorhanden, wird es dennoch genutzt

cdk/Patches/busybox.config.m4
- uClibc-Kompilierpatch, uClibc kann keine shadow-Passwörter. Einwände? Dieser Patch wirkt sich nur auf den yadd-Betrieb aus.

cdk/Patches/libcurl.diff
- uClibc-Kompilierpatch

cdk/Patches/nfs-utils.diff
- uClibc-Kompilierpatch, getgrouplist fehlt in uClibc und wird in nfs-utils nun selbst bereitgestellt, bei glibc wird die dortige Funktion verwendet

cdk/Patches/uclibc-0.9.11.diff
- Datei ist überflüssig

cdk/Patches/uclibc-0.9.28.3.config
- kleine Modifikationen an den benötigten Optionen

cdk/Patches/uclibc-0.9.28.3.diff
- Backport von getrpcbynumber_r für nfs-utils (1, 2) nach uClibc 0.9.28.3
- einige Patches für uClibc-0.9.28.3 vom OpenWRT-Projekt hinzugefügt:
120-more_standard_math.patch
150-portability.patch
300-let-optimized-stringops-override-default-ones.patch
301-fix-getrusage-argument-type.patch
302-fix-__libc_fcntl64-varargs-prototype.patch
303-fix-broken-__libc_open-declaration.patch

cdk/rules-archive
- Aktualisierte Download-URLs für uClibc

cdk/rules-make
- uClibc 0.9.28.3

hostapps/mklibs/mklibs.py
- uClibc-Unterstützung

Hier der eigentliche uClibc-Patch: uclibc.diff

uclibc.diff ist aber IMHO noch nicht CVS-fähig, es fehlen noch mehr Tests.

Beitrag von **seife** » Samstag 11. Oktober 2008, 14:55

uclibc_prep.diff ist eingechecked.

rhabarber1848 hat geschrieben:cdk/Patches/busybox.config.m4
- uClibc-Kompilierpatch, uClibc kann keine shadow-Passwörter. Einwände? Dieser Patch wirkt sich nur auf den yadd-Betrieb aus.

@seife: Dieser Patch ist nicht im newmake-branch gelandet:
http://cvs.tuxbox-cvs.sourceforge.net/t ... 9&view=log

Beitrag von **seife** » Samstag 11. Oktober 2008, 16:21

fixed.

Beitrag von **dbt** » Samstag 11. Oktober 2008, 18:32

Sollte ohne uclibc nicht alles wie gewohnt laufen? Bei Newmake streikts an der Stelle:

Code: Alles auswählen

configure: creating ./config.status
config.status: creating include/builddefs
config.status: creating include/platform_defs.h
make[1]: Entering directory `/mnt/IBM/tuxbox-cvs_dbt/cdk/xfsprogs-2.9.4'
=== include ===
rm -f xfs disk
ln -s . xfs
ln -s . disk
=== libxfs ===
/home/dbt/dbox2/cdk/bin/libtool --mode=compile powerpc-tuxbox-linux-gnu-gcc -I. -g -O2 -DNDEBUG -DVERSION=\"2.9.4\" -DLOCALEDIR=\"/home/dbt/dbox2/cdkroot/share/locale\" -DPACKAGE=\"xfsprogs\" -I../include -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -funsigned-char -fno-strict-aliasing -Wall   -c bit.c
gmake[2]: /home/dbt/dbox2/cdk/bin/libtool: Kommando nicht gefunden
gmake[2]: *** [bit.lo] Fehler 127
make[1]: *** [default] Fehler 2
make[1]: Leaving directory `/mnt/IBM/tuxbox-cvs_dbt/cdk/xfsprogs-2.9.4'
make: *** [.deps/xfsprogs] Fehler 2

dbt hat geschrieben:make[1]: Entering directory `/mnt/IBM/tuxbox-cvs_dbt/cdk/xfsprogs-2.9.4'
[...]
gmake[2]: /home/dbt/dbox2/cdk/bin/libtool: Kommando nicht gefunden

Existiert cdk/.deps/libtool?

Wenn nein, was macht "make libtool"? Wenn nichts passiert, existiert cdk/libtool?
Wenn ja, lösche cdk/libtool und starte "make xfsprogs" von Neuem. In diesem
Fall ist cdk/libtool ein Überbleibsel dieses bereits zurückgenommenen Patches:
http://cvs.tuxbox-cvs.sourceforge.net/t ... 1.147.2.46

Hast Du einen neuen CVS-checkout in einem leeren Verzeichnis probiert?
An den targets xfsprogs und libtool wurde durch meine Patches nichts verändert.

rhabarber1848 hat geschrieben:Hier der eigentliche uClibc-Patch: uclibc.diff

uclibc.diff ist aber IMHO noch nicht CVS-fähig, es fehlen noch mehr Tests.

Patch aktualisiert

- Kompilierfix für ltrace eingebaut
- folgenden Patch entfernt, Linkproblem scheint durch uclibc_link.diff behoben zu sein, Fehler tritt nicht mehr auf:

- (03.10.2008): Linkproblem in lcdmenu behoben, tritt scheinbar nur mit uClibc auf

Beitrag von **amiga23** » Freitag 17. Oktober 2008, 06:03

So, bin wieder da.
Habe ein Image mit aktuellem uclibc.diff gebaut. -> funktioniert tadellos, keine Probleme mit Neutrino mehr.

Hier die Daten für links:

Code: Alles auswählen

rules-archive:
#
# TKS
#
links-1.00.tar.gz;http://www.jikos.cz/~mikulas/links//download
links-2.2.tar.gz;http://links.twibright.com/download
links-2.1pre28.tar.gz;http://links.twibright.com/download

rules-make:
#
# TKS
#
links;1.0;links-1.00;links-1.00.tar.gz;extract:links-1.00.tar.gz
links_g;2.2;links-2.2;links-2.2.tar.gz;extract:links-2.2.tar.gz
#links_g;2.1pre28;links-2.1pre28;links-2.1pre28.tar.gz;extract:links-2.1pre28.tar.gz
 	


rules-install:
#
# TKS - test
#
links;make:install:DESTDIR=TARGET
links_g;make:install:DESTDIR=TARGET


configure.ac:
#
# TKS
#
TUXBOX_RULES_MAKE(links)
TUXBOX_RULES_MAKE(links_g)


Makefile.am:
# TKS
include make/tks.mk


make/tks.mk:
#######################
#
#   tks stuff
#

tks: links

links: bootstrap @DEPENDS_links@
        @PREPARE_links@
        cd @DIR_links@ && \
                $(BUILDENV) \
                ./configure \
                        --build=$(build) \
                        --host=$(target) \
                        --prefix= && \
                $(MAKE) all && \
                @INSTALL_links@
        @CLEANUP_links@
        touch $@

links_g: bootstrap @DEPENDS_links_g@
        @PREPARE_links_g@
        cd @DIR_links_g@ && \
                $(BUILDENV) \
                ./configure \
                        --build=$(build) \
                        --host=$(target) \
                        --prefix= \
                        --enable-graphics \
                        --without-x \
                        --oldincludedir=/media/disk/tuxbox-uclibc-new/dbox2/cdkroot/include:/media/disk/tuxbox-uclibc-new/dbox2/cdkroot/include/directfb && \
                $(MAKE) all && \
                @INSTALL_links_g@
        @CLEANUP_links_g@
        touch $@

"make links" baut dann links im textonly mode
"make links_g" baut links im graphic modus - hierzu muss aber auch directfb installiert sein.

Leicht optimierte Version von EDIT: Patch ist im CVS

Diese Version ist die erste, die ich persönlich reif fürs CVS halte.

Changelog
- make-target glibc in libc umbenannt, je nach ./configure-Switch wird entweder glibc oder uClibc kompiliert
Es macht keinen Sinn, bei --enable-uclibc ein make-target glibc zu haben und umgekehrt
- uClibc-Kompilierbefehle aufgeräumt

PS: Kleine Erweiterung für uClibc und Kernel 2.6: EDIT: Patch ist im CVS

Dieser Patch bewirkt, dass jedes customization-Skript über die Variablen $KERNEL, $KERNELVERSION
und $LIBC herausfinden kann, welche Einstellungen per ./configure aktiv sind.

Beispiel:

Code: Alles auswählen

case $KERNEL in

    2.4) cifs_mod="cifs.o" ;;

    2.6) cifs_mod="cifs.ko" ;;

esac

rm -v $1/root-squashfs/lib/modules/$KERNELVERSION/kernel/fs/cifs/$cifs_mod

Ergebnis:

Code: Alles auswählen

[ -x /root/tuxbox/customizations/root-squashfs-local.sh ] && KERNEL=2.4 KERNELVERSION=2.4.36.6-dbox2 LIBC=uclibc /root/tuxbox/customizations/root-squashfs-local.sh /root/tuxbox/work_uclibc/image/cdkflash /root/tuxbox/work_uclibc/compile/cdk || true
â€ž/root/tuxbox/work_uclibc/image/cdkflash/root-squashfs/lib/modules/2.4.36.6-dbox2/kernel/fs/cifs/cifs.oâ€œ entfernt

Beitrag von **amiga23** » Freitag 17. Oktober 2008, 19:15

Kernel 2.6 mit uclibc und Kernel 2.4 mit uclibc bauen sauber durch.
Mit glibc habe ich aber wieder das Problem mit lufs. Es versucht wieder Dateien im Hostsystem zu überschreiben.

Mehr war leider nicht mehr im Buffer, hoffe die Infos reichen Dir:

Code: Alles auswählen

checking for gfortran... gfortran
configure: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@gnu.org.
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 98304
checking command to parse /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/bin/powerpc-tuxbox-linux-gnu-nm -B output from powerpc-tuxbox-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for powerpc-tuxbox-linux-gnu-ar... powerpc-tuxbox-linux-gnu-ar
checking for powerpc-tuxbox-linux-gnu-ranlib... powerpc-tuxbox-linux-gnu-ranlib
checking for powerpc-tuxbox-linux-gnu-strip... (cached) powerpc-tuxbox-linux-gnu-strip
checking for correct ltmain.sh version... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for powerpc-tuxbox-linux-gnu-gcc option to produce PIC... -fPIC
checking if powerpc-tuxbox-linux-gnu-gcc PIC flag -fPIC works... yes
checking if powerpc-tuxbox-linux-gnu-gcc static flag -static works... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -c -o file.o... yes
checking whether the powerpc-tuxbox-linux-gnu-gcc linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by powerpc-tuxbox-linux-gnu-g++... /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld
checking if the linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) is GNU ld... yes
checking whether the powerpc-tuxbox-linux-gnu-g++ linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking for powerpc-tuxbox-linux-gnu-g++ option to produce PIC... -fPIC
checking if powerpc-tuxbox-linux-gnu-g++ PIC flag -fPIC works... yes
checking if powerpc-tuxbox-linux-gnu-g++ static flag -static works... yes
checking if powerpc-tuxbox-linux-gnu-g++ supports -c -o file.o... yes
checking whether the powerpc-tuxbox-linux-gnu-g++ linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking whether make sets $(MAKE)... (cached) yes
checking for ssh... found (/usr/bin/ssh)
checking for gnome-config... no
checking for gnome-vfs-config... no
checking for gnome_vfs_init in -lgnomevfs... no
checking for pthread_detach in -lpthread... yes
checking for ANSI C header files... (cached) yes
checking for unistd.h... (cached) yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking sys/byteswap.h usability... no
checking sys/byteswap.h presence... no
checking for sys/byteswap.h... no
checking endian.h usability... yes
checking endian.h presence... yes
checking for endian.h... yes
checking machine/endian.h usability... no
checking machine/endian.h presence... no
checking for machine/endian.h... no
checking for sys/types.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking for mkdir... yes
checking for rmdir... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: WARNING:  Makefile.in seems to ignore the --datarootdir setting
config.status: creating lufsd/Makefile
config.status: WARNING:  lufsd/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/Makefile
config.status: WARNING:  filesystems/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/localfs/Makefile
config.status: WARNING:  filesystems/localfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/locasefs/Makefile
config.status: WARNING:  filesystems/locasefs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/sshfs/Makefile
config.status: WARNING:  filesystems/sshfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/ftpfs/Makefile
config.status: WARNING:  filesystems/ftpfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cardfs/Makefile
config.status: WARNING:  filesystems/cardfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cefs/Makefile
config.status: WARNING:  filesystems/cefs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cefs/asyncd/Makefile
config.status: WARNING:  filesystems/cefs/asyncd/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/gvfs/Makefile
config.status: WARNING:  filesystems/gvfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/gnetfs/Makefile
config.status: WARNING:  filesystems/gnetfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/wavfs/Makefile
config.status: WARNING:  filesystems/wavfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating util/Makefile
config.status: WARNING:  util/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Makefile
config.status: WARNING:  kernel/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Linux/Makefile
config.status: WARNING:  kernel/Linux/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Linux/2.4/Makefile
config.status: WARNING:  kernel/Linux/2.4/Makefile.in seems to ignore the --datarootdir setting
config.status: creating include/Makefile
config.status: WARNING:  include/Makefile.in seems to ignore the --datarootdir setting
config.status: creating config/Makefile
config.status: WARNING:  config/Makefile.in seems to ignore the --datarootdir setting
config.status: creating docs/Makefile
config.status: WARNING:  docs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating man/Makefile
config.status: WARNING:  man/Makefile.in seems to ignore the --datarootdir setting
config.status: creating config.h
config.status: executing depfiles commands
###############################################################################
 supported filesystems: ftpfs sshfs
 suid files: lufsmnt & lufsumount.
###############################################################################
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
cd . && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  Makefile
cd . && /bin/sh ./config.status Makefile 
config.status: creating Makefile
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
cd . && /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run autoheader
touch ./config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make  all-recursive
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
Making all in kernel
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  kernel/Makefile
cd .. && /bin/sh ./config.status kernel/Makefile 
config.status: creating kernel/Makefile
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[5]: Für das Ziel Â»all-amÂ« ist nichts zu tun.
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
Making all in lufsd
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT daemon.o -MD -MP -MF ".deps/daemon.Tpo" \
	  -c -o daemon.o `test -f 'daemon.c' || echo './'`daemon.c; \
	then mv -f ".deps/daemon.Tpo" ".deps/daemon.Po"; \
	else rm -f ".deps/daemon.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT message.o -MD -MP -MF ".deps/message.Tpo" \
	  -c -o message.o `test -f 'message.c' || echo './'`message.c; \
	then mv -f ".deps/message.Tpo" ".deps/message.Po"; \
	else rm -f ".deps/message.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT fsctl.o -MD -MP -MF ".deps/fsctl.Tpo" \
	  -c -o fsctl.o `test -f 'fsctl.c' || echo './'`fsctl.c; \
	then mv -f ".deps/fsctl.Tpo" ".deps/fsctl.Po"; \
	else rm -f ".deps/fsctl.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT filesystem.o -MD -MP -MF ".deps/filesystem.Tpo" \
	  -c -o filesystem.o `test -f 'filesystem.c' || echo './'`filesystem.c; \
	then mv -f ".deps/filesystem.Tpo" ".deps/filesystem.Po"; \
	else rm -f ".deps/filesystem.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT dircache.o -MD -MP -MF ".deps/dircache.Tpo" \
	  -c -o dircache.o `test -f 'dircache.c' || echo './'`dircache.c; \
	then mv -f ".deps/dircache.Tpo" ".deps/dircache.Po"; \
	else rm -f ".deps/dircache.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT options.o -MD -MP -MF ".deps/options.Tpo" \
	  -c -o options.o `test -f 'options.c' || echo './'`options.c; \
	then mv -f ".deps/options.Tpo" ".deps/options.Po"; \
	else rm -f ".deps/options.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsd -rdynamic -lpthread daemon.o message.o fsctl.o filesystem.o dircache.o options.o -ldl  -lpthread 
mkdir .libs
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsd -rdynamic daemon.o message.o fsctl.o filesystem.o dircache.o options.o  -ldl -lpthread  
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
Making all in filesystems
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making all in ftpfs
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
cd ../.. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  filesystems/ftpfs/Makefile
cd ../.. && /bin/sh ./config.status filesystems/ftpfs/Makefile depfiles
config.status: creating filesystems/ftpfs/Makefile
config.status: executing depfiles commands
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpfs.lo -MD -MP -MF ".deps/ftpfs.Tpo" \
	  -c -o ftpfs.lo `test -f 'ftpfs.cpp' || echo './'`ftpfs.cpp; \
	then mv -f ".deps/ftpfs.Tpo" ".deps/ftpfs.Plo"; \
	else rm -f ".deps/ftpfs.Tpo"; exit 1; \
	fi
mkdir .libs
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpfs.lo -MD -MP -MF .deps/ftpfs.Tpo -c ftpfs.cpp  -fPIC -DPIC -o .libs/ftpfs.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftplib.lo -MD -MP -MF ".deps/ftplib.Tpo" \
	  -c -o ftplib.lo `test -f 'ftplib.cpp' || echo './'`ftplib.cpp; \
	then mv -f ".deps/ftplib.Tpo" ".deps/ftplib.Plo"; \
	else rm -f ".deps/ftplib.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftplib.lo -MD -MP -MF .deps/ftplib.Tpo -c ftplib.cpp  -fPIC -DPIC -o .libs/ftplib.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_unix.lo -MD -MP -MF ".deps/ftpsys_unix.Tpo" \
	  -c -o ftpsys_unix.lo `test -f 'ftpsys_unix.cpp' || echo './'`ftpsys_unix.cpp; \
	then mv -f ".deps/ftpsys_unix.Tpo" ".deps/ftpsys_unix.Plo"; \
	else rm -f ".deps/ftpsys_unix.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_unix.lo -MD -MP -MF .deps/ftpsys_unix.Tpo -c ftpsys_unix.cpp  -fPIC -DPIC -o .libs/ftpsys_unix.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_netware.lo -MD -MP -MF ".deps/ftpsys_netware.Tpo" \
	  -c -o ftpsys_netware.lo `test -f 'ftpsys_netware.cpp' || echo './'`ftpsys_netware.cpp; \
	then mv -f ".deps/ftpsys_netware.Tpo" ".deps/ftpsys_netware.Plo"; \
	else rm -f ".deps/ftpsys_netware.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_netware.lo -MD -MP -MF .deps/ftpsys_netware.Tpo -c ftpsys_netware.cpp  -fPIC -DPIC -o .libs/ftpsys_netware.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_windows.lo -MD -MP -MF ".deps/ftpsys_windows.Tpo" \
	  -c -o ftpsys_windows.lo `test -f 'ftpsys_windows.cpp' || echo './'`ftpsys_windows.cpp; \
	then mv -f ".deps/ftpsys_windows.Tpo" ".deps/ftpsys_windows.Plo"; \
	else rm -f ".deps/ftpsys_windows.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_windows.lo -MD -MP -MF .deps/ftpsys_windows.Tpo -c ftpsys_windows.cpp  -fPIC -DPIC -o .libs/ftpsys_windows.o
ftpsys_windows.cpp:48: warning: 'char* next_word(char*)' defined but not used
/bin/sh ../../libtool --mode=link powerpc-tuxbox-linux-gnu-g++  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o liblufs-ftpfs.la -rpath /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib -version-info 2:0:0 ftpfs.lo ftplib.lo ftpsys_unix.lo ftpsys_netware.lo ftpsys_windows.lo  -lpthread 
powerpc-tuxbox-linux-gnu-g++ -shared -nostdlib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crti.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtbeginS.o  .libs/ftpfs.o .libs/ftplib.o .libs/ftpsys_unix.o .libs/ftpsys_netware.o .libs/ftpsys_windows.o  -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -lpthread -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6 -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof/libstdc++.so -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src/.libs -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib -lm -lc -lgcc_s_nof /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtsavres.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtendS.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crtn.o  -Wl,-soname -Wl,liblufs-ftpfs.so.2 -o .libs/liblufs-ftpfs.so.2.0.0
(cd .libs && rm -f liblufs-ftpfs.so.2 && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so.2)
(cd .libs && rm -f liblufs-ftpfs.so && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so)
creating liblufs-ftpfs.la
(cd .libs && rm -f liblufs-ftpfs.la && ln -s ../liblufs-ftpfs.la liblufs-ftpfs.la)
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
Making all in sshfs
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
cd ../.. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  filesystems/sshfs/Makefile
cd ../.. && /bin/sh ./config.status filesystems/sshfs/Makefile depfiles
config.status: creating filesystems/sshfs/Makefile
config.status: executing depfiles commands
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include   -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sshfs.lo -MD -MP -MF ".deps/sshfs.Tpo" \
	  -c -o sshfs.lo `test -f 'sshfs.cpp' || echo './'`sshfs.cpp; \
	then mv -f ".deps/sshfs.Tpo" ".deps/sshfs.Plo"; \
	else rm -f ".deps/sshfs.Tpo"; exit 1; \
	fi
mkdir .libs
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\" -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sshfs.lo -MD -MP -MF .deps/sshfs.Tpo -c sshfs.cpp  -fPIC -DPIC -o .libs/sshfs.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include   -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sftplib.lo -MD -MP -MF ".deps/sftplib.Tpo" \
	  -c -o sftplib.lo `test -f 'sftplib.cpp' || echo './'`sftplib.cpp; \
	then mv -f ".deps/sftplib.Tpo" ".deps/sftplib.Plo"; \
	else rm -f ".deps/sftplib.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\" -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sftplib.lo -MD -MP -MF .deps/sftplib.Tpo -c sftplib.cpp  -fPIC -DPIC -o .libs/sftplib.o
/bin/sh ../../libtool --mode=link powerpc-tuxbox-linux-gnu-g++ -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o liblufs-sshfs.la -rpath /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib -version-info 2:0:0 sshfs.lo sftplib.lo  -lpthread 
powerpc-tuxbox-linux-gnu-g++ -shared -nostdlib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crti.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtbeginS.o  .libs/sshfs.o .libs/sftplib.o  -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -lpthread -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6 -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof/libstdc++.so -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src/.libs -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib -lm -lc -lgcc_s_nof /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtsavres.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtendS.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crtn.o  -Wl,-soname -Wl,liblufs-sshfs.so.2 -o .libs/liblufs-sshfs.so.2.0.0
(cd .libs && rm -f liblufs-sshfs.so.2 && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so.2)
(cd .libs && rm -f liblufs-sshfs.so && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so)
creating liblufs-sshfs.la
(cd .libs && rm -f liblufs-sshfs.la && ln -s ../liblufs-sshfs.la liblufs-sshfs.la)
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[5]: Für das Ziel Â»all-amÂ« ist nichts zu tun.
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making all in util
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsmount.o -MD -MP -MF ".deps/lufsmount.Tpo" \
	  -c -o lufsmount.o `test -f 'lufsmount.c' || echo './'`lufsmount.c; \
	then mv -f ".deps/lufsmount.Tpo" ".deps/lufsmount.Po"; \
	else rm -f ".deps/lufsmount.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsmount  lufsmount.o  -lpthread 
mkdir .libs
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsmount lufsmount.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsumount.o -MD -MP -MF ".deps/lufsumount.Tpo" \
	  -c -o lufsumount.o `test -f 'lufsumount.c' || echo './'`lufsumount.c; \
	then mv -f ".deps/lufsumount.Tpo" ".deps/lufsumount.Po"; \
	else rm -f ".deps/lufsumount.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsumount  lufsumount.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsumount lufsumount.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsmnt.o -MD -MP -MF ".deps/lufsmnt.Tpo" \
	  -c -o lufsmnt.o `test -f 'lufsmnt.c' || echo './'`lufsmnt.c; \
	then mv -f ".deps/lufsmnt.Tpo" ".deps/lufsmnt.Po"; \
	else rm -f ".deps/lufsmnt.Tpo"; exit 1; \
	fi
lufsmnt.c:17:1: warning: "_PATH_MOUNTED" redefined
In file included from /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/include/mntent.h:26,
                 from lufsmnt.c:7:
/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/include/paths.h:54:1: warning: this is the location of the previous definition
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsmnt  lufsmnt.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsmnt lufsmnt.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT auto.sshfs.o -MD -MP -MF ".deps/auto.sshfs.Tpo" \
	  -c -o auto.sshfs.o `test -f 'auto.sshfs.c' || echo './'`auto.sshfs.c; \
	then mv -f ".deps/auto.sshfs.Tpo" ".deps/auto.sshfs.Po"; \
	else rm -f ".deps/auto.sshfs.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o auto.sshfs  auto.sshfs.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o auto.sshfs auto.sshfs.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT auto.ftpfs.o -MD -MP -MF ".deps/auto.ftpfs.Tpo" \
	  -c -o auto.ftpfs.o `test -f 'auto.ftpfs.c' || echo './'`auto.ftpfs.c; \
	then mv -f ".deps/auto.ftpfs.Tpo" ".deps/auto.ftpfs.Po"; \
	else rm -f ".deps/auto.ftpfs.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o auto.ftpfs  auto.ftpfs.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o auto.ftpfs auto.ftpfs.o  -lpthread  
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
Making all in include
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  include/Makefile
cd .. && /bin/sh ./config.status include/Makefile 
config.status: creating include/Makefile
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[4]: Für das Ziel Â»allÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
Making all in man
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  man/Makefile
cd .. && /bin/sh ./config.status man/Makefile 
config.status: creating man/Makefile
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[4]: Für das Ziel Â»allÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
Making install in kernel
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[5]: Für das Ziel Â»install-exec-amÂ« ist nichts zu tun.
make[5]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
Making install in lufsd
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin
  /bin/sh ../libtool --mode=install /usr/bin/install -c lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd
/usr/bin/install -c lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin
 /usr/bin/install -c lussh /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lussh
make  install-exec-hook
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
lufsd post install configuration...
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../sbin
ln -fs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../sbin/mount.lufs
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
/bin/sh ../config/mkinstalldirs /etc
 /usr/bin/install -c -m 644 lufsd.conf /etc/lufsd.conf
/usr/bin/install: reguläre Datei â€ž/etc/lufsd.confâ€œ kann nicht angelegt werden: Keine Berechtigung
make[4]: *** [install-configDATA] Fehler 1
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[3]: *** [install-am] Fehler 2
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[2]: *** [install-recursive] Fehler 1
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[1]: *** [/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd] Fehler 2
make[1]: *** Datei Â»/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsdÂ« wird gelöscht
make[1]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk'
make: *** [/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root] Fehler 2

amiga23 hat geschrieben:Mit glibc habe ich aber wieder das Problem mit lufs. Es versucht wieder Dateien im Hostsystem zu überschreiben.

Das geschieht bei mir nicht, startest Du das target per "make flash-lufsd" nochmals und
sendest das komplette Log?

Beitrag von **amiga23** » Freitag 17. Oktober 2008, 20:13

Interessanter weise funktioniert es beim 2. Verusch. Folgendermassen reproduzierbar:

Code: Alles auswählen

rm ../../dbox2/cdkflash/root/bin/lufsd
make flash-lufsd

ergibt folgenden Fehler:

Code: Alles auswählen

( rm -rf lufs-0.9.7 || /bin/true ) && gunzip -cd Archive/lufs-0.9.7.tar.gz | TAPE=- tar -x && ( cd lufs-0.9.7; patch -p1 < ../Patches/lufs.diff ) && ((for f1 in config.guess config.sub; do (for f2 in `find lufs-0.9.7 -name $f1`; do (test -e $f2 && rm -f $f2 && ln -s /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/Patches/$f1 $f2 && echo "updated $f2") done) done) || /bin/true)
patching file configure.in
patching file include/lufs/fs.h
patching file filesystems/ftpfs/ftpfs.cpp
patching file filesystems/ftpfs/ftplib.cpp
patching file filesystems/ftpfs/ftpsys_netware.cpp
patching file filesystems/ftpfs/ftpsys_unix.cpp
patching file filesystems/ftpfs/ftpsys_windows.cpp
patching file lufsd/daemon.c
patching file lufsd/dircache.c
patching file lufsd/fsctl.c
patching file util/lufsmnt.c
patching file filesystems/Makefile.in
patching file filesystems/Makefile.am
patching file lufsd/Makefile.am
patching file lufsd/Makefile.in
patching file util/Makefile.am
patching file util/Makefile.in
Hunk #1 succeeded at 508 with fuzz 1.
updated lufs-0.9.7/config/config.guess
updated lufs-0.9.7/config/config.sub
cd lufs-0.9.7 && \
		AR=powerpc-tuxbox-linux-gnu-ar AS=powerpc-tuxbox-linux-gnu-as CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ NM=powerpc-tuxbox-linux-gnu-nm RANLIB=powerpc-tuxbox-linux-gnu-ranlib CFLAGS="-pipe -Os" CXXFLAGS="-pipe -Os" LDFLAGS="-Wl,-O1" PKG_CONFIG_PATH=/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkroot/lib/pkgconfig \
		aclocal && \
		libtoolize --force && \
		autoconf && \
		./configure \
			--build=x86_64-unknown-linux-gnu \
			--host=powerpc-tuxbox-linux-gnu \
			--prefix=/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root \
			--exec_prefix=/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root \
			--disable-kernel-support && \
		make all install
Putting files in AC_CONFIG_AUX_DIR, `config'.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... powerpc-tuxbox-linux-gnu
checking target system type... powerpc-tuxbox-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for powerpc-tuxbox-linux-gnu-strip... powerpc-tuxbox-linux-gnu-strip
checking for powerpc-tuxbox-linux-gnu-gcc... powerpc-tuxbox-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... yes
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether powerpc-tuxbox-linux-gnu-gcc accepts -g... yes
checking for powerpc-tuxbox-linux-gnu-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of powerpc-tuxbox-linux-gnu-gcc... gcc3
checking how to run the C preprocessor... powerpc-tuxbox-linux-gnu-gcc -E
checking for powerpc-tuxbox-linux-gnu-g++... powerpc-tuxbox-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether powerpc-tuxbox-linux-gnu-g++ accepts -g... yes
checking dependency style of powerpc-tuxbox-linux-gnu-g++... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by powerpc-tuxbox-linux-gnu-gcc... /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld
checking if the linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) is GNU ld... yes
checking for /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/bin/powerpc-tuxbox-linux-gnu-nm -B
checking how to recognize dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... powerpc-tuxbox-linux-gnu-g++ -E
checking for powerpc-tuxbox-linux-gnu-g77... no
checking for powerpc-tuxbox-linux-gnu-xlf... no
checking for powerpc-tuxbox-linux-gnu-f77... no
checking for powerpc-tuxbox-linux-gnu-frt... no
checking for powerpc-tuxbox-linux-gnu-pgf77... no
checking for powerpc-tuxbox-linux-gnu-cf77... no
checking for powerpc-tuxbox-linux-gnu-fort77... no
checking for powerpc-tuxbox-linux-gnu-fl32... no
checking for powerpc-tuxbox-linux-gnu-af77... no
checking for powerpc-tuxbox-linux-gnu-xlf90... no
checking for powerpc-tuxbox-linux-gnu-f90... no
checking for powerpc-tuxbox-linux-gnu-pgf90... no
checking for powerpc-tuxbox-linux-gnu-pghpf... no
checking for powerpc-tuxbox-linux-gnu-epcf90... no
checking for powerpc-tuxbox-linux-gnu-gfortran... no
checking for powerpc-tuxbox-linux-gnu-g95... no
checking for powerpc-tuxbox-linux-gnu-xlf95... no
checking for powerpc-tuxbox-linux-gnu-f95... no
checking for powerpc-tuxbox-linux-gnu-fort... no
checking for powerpc-tuxbox-linux-gnu-ifort... no
checking for powerpc-tuxbox-linux-gnu-ifc... no
checking for powerpc-tuxbox-linux-gnu-efc... no
checking for powerpc-tuxbox-linux-gnu-pgf95... no
checking for powerpc-tuxbox-linux-gnu-lf95... no
checking for powerpc-tuxbox-linux-gnu-ftn... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
configure: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@gnu.org.
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 98304
checking command to parse /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/bin/powerpc-tuxbox-linux-gnu-nm -B output from powerpc-tuxbox-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for powerpc-tuxbox-linux-gnu-ar... powerpc-tuxbox-linux-gnu-ar
checking for powerpc-tuxbox-linux-gnu-ranlib... powerpc-tuxbox-linux-gnu-ranlib
checking for powerpc-tuxbox-linux-gnu-strip... (cached) powerpc-tuxbox-linux-gnu-strip
checking for correct ltmain.sh version... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for powerpc-tuxbox-linux-gnu-gcc option to produce PIC... -fPIC
checking if powerpc-tuxbox-linux-gnu-gcc PIC flag -fPIC works... yes
checking if powerpc-tuxbox-linux-gnu-gcc static flag -static works... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -c -o file.o... yes
checking whether the powerpc-tuxbox-linux-gnu-gcc linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by powerpc-tuxbox-linux-gnu-g++... /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld
checking if the linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) is GNU ld... yes
checking whether the powerpc-tuxbox-linux-gnu-g++ linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking for powerpc-tuxbox-linux-gnu-g++ option to produce PIC... -fPIC
checking if powerpc-tuxbox-linux-gnu-g++ PIC flag -fPIC works... yes
checking if powerpc-tuxbox-linux-gnu-g++ static flag -static works... yes
checking if powerpc-tuxbox-linux-gnu-g++ supports -c -o file.o... yes
checking whether the powerpc-tuxbox-linux-gnu-g++ linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking whether make sets $(MAKE)... (cached) yes
checking for ssh... found (/usr/bin/ssh)
checking for gnome-config... no
checking for gnome-vfs-config... no
checking for gnome_vfs_init in -lgnomevfs... no
checking for pthread_detach in -lpthread... yes
checking for ANSI C header files... (cached) yes
checking for unistd.h... (cached) yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking sys/byteswap.h usability... no
checking sys/byteswap.h presence... no
checking for sys/byteswap.h... no
checking endian.h usability... yes
checking endian.h presence... yes
checking for endian.h... yes
checking machine/endian.h usability... no
checking machine/endian.h presence... no
checking for machine/endian.h... no
checking for sys/types.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking for mkdir... yes
checking for rmdir... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: WARNING:  Makefile.in seems to ignore the --datarootdir setting
config.status: creating lufsd/Makefile
config.status: WARNING:  lufsd/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/Makefile
config.status: WARNING:  filesystems/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/localfs/Makefile
config.status: WARNING:  filesystems/localfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/locasefs/Makefile
config.status: WARNING:  filesystems/locasefs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/sshfs/Makefile
config.status: WARNING:  filesystems/sshfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/ftpfs/Makefile
config.status: WARNING:  filesystems/ftpfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cardfs/Makefile
config.status: WARNING:  filesystems/cardfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cefs/Makefile
config.status: WARNING:  filesystems/cefs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cefs/asyncd/Makefile
config.status: WARNING:  filesystems/cefs/asyncd/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/gvfs/Makefile
config.status: WARNING:  filesystems/gvfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/gnetfs/Makefile
config.status: WARNING:  filesystems/gnetfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/wavfs/Makefile
config.status: WARNING:  filesystems/wavfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating util/Makefile
config.status: WARNING:  util/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Makefile
config.status: WARNING:  kernel/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Linux/Makefile
config.status: WARNING:  kernel/Linux/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Linux/2.4/Makefile
config.status: WARNING:  kernel/Linux/2.4/Makefile.in seems to ignore the --datarootdir setting
config.status: creating include/Makefile
config.status: WARNING:  include/Makefile.in seems to ignore the --datarootdir setting
config.status: creating config/Makefile
config.status: WARNING:  config/Makefile.in seems to ignore the --datarootdir setting
config.status: creating docs/Makefile
config.status: WARNING:  docs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating man/Makefile
config.status: WARNING:  man/Makefile.in seems to ignore the --datarootdir setting
config.status: creating config.h
config.status: executing depfiles commands
###############################################################################
 supported filesystems: ftpfs sshfs
 suid files: lufsmnt & lufsumount.
###############################################################################
make[1]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
cd . && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  Makefile
cd . && /bin/sh ./config.status Makefile 
config.status: creating Makefile
make[1]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[1]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
cd . && /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run autoheader
touch ./config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make  all-recursive
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
Making all in kernel
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  kernel/Makefile
cd .. && /bin/sh ./config.status kernel/Makefile 
config.status: creating kernel/Makefile
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Für das Ziel Â»all-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
Making all in lufsd
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT daemon.o -MD -MP -MF ".deps/daemon.Tpo" \
	  -c -o daemon.o `test -f 'daemon.c' || echo './'`daemon.c; \
	then mv -f ".deps/daemon.Tpo" ".deps/daemon.Po"; \
	else rm -f ".deps/daemon.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT message.o -MD -MP -MF ".deps/message.Tpo" \
	  -c -o message.o `test -f 'message.c' || echo './'`message.c; \
	then mv -f ".deps/message.Tpo" ".deps/message.Po"; \
	else rm -f ".deps/message.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT fsctl.o -MD -MP -MF ".deps/fsctl.Tpo" \
	  -c -o fsctl.o `test -f 'fsctl.c' || echo './'`fsctl.c; \
	then mv -f ".deps/fsctl.Tpo" ".deps/fsctl.Po"; \
	else rm -f ".deps/fsctl.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT filesystem.o -MD -MP -MF ".deps/filesystem.Tpo" \
	  -c -o filesystem.o `test -f 'filesystem.c' || echo './'`filesystem.c; \
	then mv -f ".deps/filesystem.Tpo" ".deps/filesystem.Po"; \
	else rm -f ".deps/filesystem.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT dircache.o -MD -MP -MF ".deps/dircache.Tpo" \
	  -c -o dircache.o `test -f 'dircache.c' || echo './'`dircache.c; \
	then mv -f ".deps/dircache.Tpo" ".deps/dircache.Po"; \
	else rm -f ".deps/dircache.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT options.o -MD -MP -MF ".deps/options.Tpo" \
	  -c -o options.o `test -f 'options.c' || echo './'`options.c; \
	then mv -f ".deps/options.Tpo" ".deps/options.Po"; \
	else rm -f ".deps/options.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsd -rdynamic -lpthread daemon.o message.o fsctl.o filesystem.o dircache.o options.o -ldl  -lpthread 
mkdir .libs
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsd -rdynamic daemon.o message.o fsctl.o filesystem.o dircache.o options.o  -ldl -lpthread  
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
Making all in filesystems
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making all in ftpfs
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
cd ../.. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  filesystems/ftpfs/Makefile
cd ../.. && /bin/sh ./config.status filesystems/ftpfs/Makefile depfiles
config.status: creating filesystems/ftpfs/Makefile
config.status: executing depfiles commands
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpfs.lo -MD -MP -MF ".deps/ftpfs.Tpo" \
	  -c -o ftpfs.lo `test -f 'ftpfs.cpp' || echo './'`ftpfs.cpp; \
	then mv -f ".deps/ftpfs.Tpo" ".deps/ftpfs.Plo"; \
	else rm -f ".deps/ftpfs.Tpo"; exit 1; \
	fi
mkdir .libs
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpfs.lo -MD -MP -MF .deps/ftpfs.Tpo -c ftpfs.cpp  -fPIC -DPIC -o .libs/ftpfs.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftplib.lo -MD -MP -MF ".deps/ftplib.Tpo" \
	  -c -o ftplib.lo `test -f 'ftplib.cpp' || echo './'`ftplib.cpp; \
	then mv -f ".deps/ftplib.Tpo" ".deps/ftplib.Plo"; \
	else rm -f ".deps/ftplib.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftplib.lo -MD -MP -MF .deps/ftplib.Tpo -c ftplib.cpp  -fPIC -DPIC -o .libs/ftplib.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_unix.lo -MD -MP -MF ".deps/ftpsys_unix.Tpo" \
	  -c -o ftpsys_unix.lo `test -f 'ftpsys_unix.cpp' || echo './'`ftpsys_unix.cpp; \
	then mv -f ".deps/ftpsys_unix.Tpo" ".deps/ftpsys_unix.Plo"; \
	else rm -f ".deps/ftpsys_unix.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_unix.lo -MD -MP -MF .deps/ftpsys_unix.Tpo -c ftpsys_unix.cpp  -fPIC -DPIC -o .libs/ftpsys_unix.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_netware.lo -MD -MP -MF ".deps/ftpsys_netware.Tpo" \
	  -c -o ftpsys_netware.lo `test -f 'ftpsys_netware.cpp' || echo './'`ftpsys_netware.cpp; \
	then mv -f ".deps/ftpsys_netware.Tpo" ".deps/ftpsys_netware.Plo"; \
	else rm -f ".deps/ftpsys_netware.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_netware.lo -MD -MP -MF .deps/ftpsys_netware.Tpo -c ftpsys_netware.cpp  -fPIC -DPIC -o .libs/ftpsys_netware.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_windows.lo -MD -MP -MF ".deps/ftpsys_windows.Tpo" \
	  -c -o ftpsys_windows.lo `test -f 'ftpsys_windows.cpp' || echo './'`ftpsys_windows.cpp; \
	then mv -f ".deps/ftpsys_windows.Tpo" ".deps/ftpsys_windows.Plo"; \
	else rm -f ".deps/ftpsys_windows.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_windows.lo -MD -MP -MF .deps/ftpsys_windows.Tpo -c ftpsys_windows.cpp  -fPIC -DPIC -o .libs/ftpsys_windows.o
ftpsys_windows.cpp:48: warning: 'char* next_word(char*)' defined but not used
/bin/sh ../../libtool --mode=link powerpc-tuxbox-linux-gnu-g++  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o liblufs-ftpfs.la -rpath /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib -version-info 2:0:0 ftpfs.lo ftplib.lo ftpsys_unix.lo ftpsys_netware.lo ftpsys_windows.lo  -lpthread 
powerpc-tuxbox-linux-gnu-g++ -shared -nostdlib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crti.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtbeginS.o  .libs/ftpfs.o .libs/ftplib.o .libs/ftpsys_unix.o .libs/ftpsys_netware.o .libs/ftpsys_windows.o  -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -lpthread -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6 -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof/libstdc++.so -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src/.libs -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib -lm -lc -lgcc_s_nof /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtsavres.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtendS.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crtn.o  -Wl,-soname -Wl,liblufs-ftpfs.so.2 -o .libs/liblufs-ftpfs.so.2.0.0
(cd .libs && rm -f liblufs-ftpfs.so.2 && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so.2)
(cd .libs && rm -f liblufs-ftpfs.so && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so)
creating liblufs-ftpfs.la
(cd .libs && rm -f liblufs-ftpfs.la && ln -s ../liblufs-ftpfs.la liblufs-ftpfs.la)
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
Making all in sshfs
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
cd ../.. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  filesystems/sshfs/Makefile
cd ../.. && /bin/sh ./config.status filesystems/sshfs/Makefile depfiles
config.status: creating filesystems/sshfs/Makefile
config.status: executing depfiles commands
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include   -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sshfs.lo -MD -MP -MF ".deps/sshfs.Tpo" \
	  -c -o sshfs.lo `test -f 'sshfs.cpp' || echo './'`sshfs.cpp; \
	then mv -f ".deps/sshfs.Tpo" ".deps/sshfs.Plo"; \
	else rm -f ".deps/sshfs.Tpo"; exit 1; \
	fi
mkdir .libs
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\" -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sshfs.lo -MD -MP -MF .deps/sshfs.Tpo -c sshfs.cpp  -fPIC -DPIC -o .libs/sshfs.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include   -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sftplib.lo -MD -MP -MF ".deps/sftplib.Tpo" \
	  -c -o sftplib.lo `test -f 'sftplib.cpp' || echo './'`sftplib.cpp; \
	then mv -f ".deps/sftplib.Tpo" ".deps/sftplib.Plo"; \
	else rm -f ".deps/sftplib.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\" -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sftplib.lo -MD -MP -MF .deps/sftplib.Tpo -c sftplib.cpp  -fPIC -DPIC -o .libs/sftplib.o
/bin/sh ../../libtool --mode=link powerpc-tuxbox-linux-gnu-g++ -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o liblufs-sshfs.la -rpath /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib -version-info 2:0:0 sshfs.lo sftplib.lo  -lpthread 
powerpc-tuxbox-linux-gnu-g++ -shared -nostdlib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crti.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtbeginS.o  .libs/sshfs.o .libs/sftplib.o  -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -lpthread -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6 -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof/libstdc++.so -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src/.libs -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib -lm -lc -lgcc_s_nof /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtsavres.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtendS.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crtn.o  -Wl,-soname -Wl,liblufs-sshfs.so.2 -o .libs/liblufs-sshfs.so.2.0.0
(cd .libs && rm -f liblufs-sshfs.so.2 && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so.2)
(cd .libs && rm -f liblufs-sshfs.so && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so)
creating liblufs-sshfs.la
(cd .libs && rm -f liblufs-sshfs.la && ln -s ../liblufs-sshfs.la liblufs-sshfs.la)
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[4]: Für das Ziel Â»all-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making all in util
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsmount.o -MD -MP -MF ".deps/lufsmount.Tpo" \
	  -c -o lufsmount.o `test -f 'lufsmount.c' || echo './'`lufsmount.c; \
	then mv -f ".deps/lufsmount.Tpo" ".deps/lufsmount.Po"; \
	else rm -f ".deps/lufsmount.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsmount  lufsmount.o  -lpthread 
mkdir .libs
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsmount lufsmount.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsumount.o -MD -MP -MF ".deps/lufsumount.Tpo" \
	  -c -o lufsumount.o `test -f 'lufsumount.c' || echo './'`lufsumount.c; \
	then mv -f ".deps/lufsumount.Tpo" ".deps/lufsumount.Po"; \
	else rm -f ".deps/lufsumount.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsumount  lufsumount.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsumount lufsumount.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsmnt.o -MD -MP -MF ".deps/lufsmnt.Tpo" \
	  -c -o lufsmnt.o `test -f 'lufsmnt.c' || echo './'`lufsmnt.c; \
	then mv -f ".deps/lufsmnt.Tpo" ".deps/lufsmnt.Po"; \
	else rm -f ".deps/lufsmnt.Tpo"; exit 1; \
	fi
lufsmnt.c:17:1: warning: "_PATH_MOUNTED" redefined
In file included from /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/include/mntent.h:26,
                 from lufsmnt.c:7:
/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/include/paths.h:54:1: warning: this is the location of the previous definition
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsmnt  lufsmnt.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsmnt lufsmnt.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT auto.sshfs.o -MD -MP -MF ".deps/auto.sshfs.Tpo" \
	  -c -o auto.sshfs.o `test -f 'auto.sshfs.c' || echo './'`auto.sshfs.c; \
	then mv -f ".deps/auto.sshfs.Tpo" ".deps/auto.sshfs.Po"; \
	else rm -f ".deps/auto.sshfs.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o auto.sshfs  auto.sshfs.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o auto.sshfs auto.sshfs.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT auto.ftpfs.o -MD -MP -MF ".deps/auto.ftpfs.Tpo" \
	  -c -o auto.ftpfs.o `test -f 'auto.ftpfs.c' || echo './'`auto.ftpfs.c; \
	then mv -f ".deps/auto.ftpfs.Tpo" ".deps/auto.ftpfs.Po"; \
	else rm -f ".deps/auto.ftpfs.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o auto.ftpfs  auto.ftpfs.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o auto.ftpfs auto.ftpfs.o  -lpthread  
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
Making all in include
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  include/Makefile
cd .. && /bin/sh ./config.status include/Makefile 
config.status: creating include/Makefile
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[3]: Für das Ziel Â»allÂ« ist nichts zu tun.
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
Making all in man
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  man/Makefile
cd .. && /bin/sh ./config.status man/Makefile 
config.status: creating man/Makefile
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Für das Ziel Â»allÂ« ist nichts zu tun.
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
Making install in kernel
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Für das Ziel Â»install-exec-amÂ« ist nichts zu tun.
make[4]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
Making install in lufsd
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin
  /bin/sh ../libtool --mode=install /usr/bin/install -c lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd
/usr/bin/install -c lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin
 /usr/bin/install -c lussh /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lussh
make  install-exec-hook
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
lufsd post install configuration...
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../sbin
ln -fs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../sbin/mount.lufs
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
/bin/sh ../config/mkinstalldirs /etc
 /usr/bin/install -c -m 644 lufsd.conf /etc/lufsd.conf
/usr/bin/install: reguläre Datei â€ž/etc/lufsd.confâ€œ kann nicht angelegt werden: Keine Berechtigung
make[3]: *** [install-configDATA] Fehler 1
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[2]: *** [install-am] Fehler 2
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[1]: *** [install-recursive] Fehler 1
make[1]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make: *** [/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd] Fehler 2
make: *** Datei Â»/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsdÂ« wird gelöscht

nach nochmal

Code: Alles auswählen

make flash-lufsd

klappt es dann:
***siehe nächster beitrag, da mehr als 60000 Zeichen***

Beitrag von **amiga23** » Freitag 17. Oktober 2008, 20:13

Code: Alles auswählen

( rm -rf lufs-0.9.7 || /bin/true ) && gunzip -cd Archive/lufs-0.9.7.tar.gz | TAPE=- tar -x && ( cd lufs-0.9.7; patch -p1 < ../Patches/lufs.diff ) && ((for f1 in config.guess config.sub; do (for f2 in `find lufs-0.9.7 -name $f1`; do (test -e $f2 && rm -f $f2 && ln -s /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/Patches/$f1 $f2 && echo "updated $f2") done) done) || /bin/true)
patching file configure.in
patching file include/lufs/fs.h
patching file filesystems/ftpfs/ftpfs.cpp
patching file filesystems/ftpfs/ftplib.cpp
patching file filesystems/ftpfs/ftpsys_netware.cpp
patching file filesystems/ftpfs/ftpsys_unix.cpp
patching file filesystems/ftpfs/ftpsys_windows.cpp
patching file lufsd/daemon.c
patching file lufsd/dircache.c
patching file lufsd/fsctl.c
patching file util/lufsmnt.c
patching file filesystems/Makefile.in
patching file filesystems/Makefile.am
patching file lufsd/Makefile.am
patching file lufsd/Makefile.in
patching file util/Makefile.am
patching file util/Makefile.in
Hunk #1 succeeded at 508 with fuzz 1.
updated lufs-0.9.7/config/config.guess
updated lufs-0.9.7/config/config.sub
cd lufs-0.9.7 && \
		AR=powerpc-tuxbox-linux-gnu-ar AS=powerpc-tuxbox-linux-gnu-as CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ NM=powerpc-tuxbox-linux-gnu-nm RANLIB=powerpc-tuxbox-linux-gnu-ranlib CFLAGS="-pipe -Os" CXXFLAGS="-pipe -Os" LDFLAGS="-Wl,-O1" PKG_CONFIG_PATH=/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkroot/lib/pkgconfig \
		aclocal && \
		libtoolize --force && \
		autoconf && \
		./configure \
			--build=x86_64-unknown-linux-gnu \
			--host=powerpc-tuxbox-linux-gnu \
			--prefix=/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root \
			--exec_prefix=/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root \
			--disable-kernel-support && \
		make all install
Putting files in AC_CONFIG_AUX_DIR, `config'.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... powerpc-tuxbox-linux-gnu
checking target system type... powerpc-tuxbox-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for powerpc-tuxbox-linux-gnu-strip... powerpc-tuxbox-linux-gnu-strip
checking for powerpc-tuxbox-linux-gnu-gcc... powerpc-tuxbox-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... yes
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether powerpc-tuxbox-linux-gnu-gcc accepts -g... yes
checking for powerpc-tuxbox-linux-gnu-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of powerpc-tuxbox-linux-gnu-gcc... gcc3
checking how to run the C preprocessor... powerpc-tuxbox-linux-gnu-gcc -E
checking for powerpc-tuxbox-linux-gnu-g++... powerpc-tuxbox-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether powerpc-tuxbox-linux-gnu-g++ accepts -g... yes
checking dependency style of powerpc-tuxbox-linux-gnu-g++... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by powerpc-tuxbox-linux-gnu-gcc... /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld
checking if the linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) is GNU ld... yes
checking for /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/bin/powerpc-tuxbox-linux-gnu-nm -B
checking how to recognize dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... powerpc-tuxbox-linux-gnu-g++ -E
checking for powerpc-tuxbox-linux-gnu-g77... no
checking for powerpc-tuxbox-linux-gnu-xlf... no
checking for powerpc-tuxbox-linux-gnu-f77... no
checking for powerpc-tuxbox-linux-gnu-frt... no
checking for powerpc-tuxbox-linux-gnu-pgf77... no
checking for powerpc-tuxbox-linux-gnu-cf77... no
checking for powerpc-tuxbox-linux-gnu-fort77... no
checking for powerpc-tuxbox-linux-gnu-fl32... no
checking for powerpc-tuxbox-linux-gnu-af77... no
checking for powerpc-tuxbox-linux-gnu-xlf90... no
checking for powerpc-tuxbox-linux-gnu-f90... no
checking for powerpc-tuxbox-linux-gnu-pgf90... no
checking for powerpc-tuxbox-linux-gnu-pghpf... no
checking for powerpc-tuxbox-linux-gnu-epcf90... no
checking for powerpc-tuxbox-linux-gnu-gfortran... no
checking for powerpc-tuxbox-linux-gnu-g95... no
checking for powerpc-tuxbox-linux-gnu-xlf95... no
checking for powerpc-tuxbox-linux-gnu-f95... no
checking for powerpc-tuxbox-linux-gnu-fort... no
checking for powerpc-tuxbox-linux-gnu-ifort... no
checking for powerpc-tuxbox-linux-gnu-ifc... no
checking for powerpc-tuxbox-linux-gnu-efc... no
checking for powerpc-tuxbox-linux-gnu-pgf95... no
checking for powerpc-tuxbox-linux-gnu-lf95... no
checking for powerpc-tuxbox-linux-gnu-ftn... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
configure: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet.  If you think this
configuration is useful to you, please write to autoconf@gnu.org.
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 98304
checking command to parse /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/bin/powerpc-tuxbox-linux-gnu-nm -B output from powerpc-tuxbox-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for powerpc-tuxbox-linux-gnu-ar... powerpc-tuxbox-linux-gnu-ar
checking for powerpc-tuxbox-linux-gnu-ranlib... powerpc-tuxbox-linux-gnu-ranlib
checking for powerpc-tuxbox-linux-gnu-strip... (cached) powerpc-tuxbox-linux-gnu-strip
checking for correct ltmain.sh version... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for powerpc-tuxbox-linux-gnu-gcc option to produce PIC... -fPIC
checking if powerpc-tuxbox-linux-gnu-gcc PIC flag -fPIC works... yes
checking if powerpc-tuxbox-linux-gnu-gcc static flag -static works... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -c -o file.o... yes
checking whether the powerpc-tuxbox-linux-gnu-gcc linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by powerpc-tuxbox-linux-gnu-g++... /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld
checking if the linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) is GNU ld... yes
checking whether the powerpc-tuxbox-linux-gnu-g++ linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking for powerpc-tuxbox-linux-gnu-g++ option to produce PIC... -fPIC
checking if powerpc-tuxbox-linux-gnu-g++ PIC flag -fPIC works... yes
checking if powerpc-tuxbox-linux-gnu-g++ static flag -static works... yes
checking if powerpc-tuxbox-linux-gnu-g++ supports -c -o file.o... yes
checking whether the powerpc-tuxbox-linux-gnu-g++ linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
checking whether make sets $(MAKE)... (cached) yes
checking for ssh... found (/usr/bin/ssh)
checking for gnome-config... no
checking for gnome-vfs-config... no
checking for gnome_vfs_init in -lgnomevfs... no
checking for pthread_detach in -lpthread... yes
checking for ANSI C header files... (cached) yes
checking for unistd.h... (cached) yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking sys/byteswap.h usability... no
checking sys/byteswap.h presence... no
checking for sys/byteswap.h... no
checking endian.h usability... yes
checking endian.h presence... yes
checking for endian.h... yes
checking machine/endian.h usability... no
checking machine/endian.h presence... no
checking for machine/endian.h... no
checking for sys/types.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking for mkdir... yes
checking for rmdir... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: WARNING:  Makefile.in seems to ignore the --datarootdir setting
config.status: creating lufsd/Makefile
config.status: WARNING:  lufsd/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/Makefile
config.status: WARNING:  filesystems/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/localfs/Makefile
config.status: WARNING:  filesystems/localfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/locasefs/Makefile
config.status: WARNING:  filesystems/locasefs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/sshfs/Makefile
config.status: WARNING:  filesystems/sshfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/ftpfs/Makefile
config.status: WARNING:  filesystems/ftpfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cardfs/Makefile
config.status: WARNING:  filesystems/cardfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cefs/Makefile
config.status: WARNING:  filesystems/cefs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/cefs/asyncd/Makefile
config.status: WARNING:  filesystems/cefs/asyncd/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/gvfs/Makefile
config.status: WARNING:  filesystems/gvfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/gnetfs/Makefile
config.status: WARNING:  filesystems/gnetfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating filesystems/wavfs/Makefile
config.status: WARNING:  filesystems/wavfs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating util/Makefile
config.status: WARNING:  util/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Makefile
config.status: WARNING:  kernel/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Linux/Makefile
config.status: WARNING:  kernel/Linux/Makefile.in seems to ignore the --datarootdir setting
config.status: creating kernel/Linux/2.4/Makefile
config.status: WARNING:  kernel/Linux/2.4/Makefile.in seems to ignore the --datarootdir setting
config.status: creating include/Makefile
config.status: WARNING:  include/Makefile.in seems to ignore the --datarootdir setting
config.status: creating config/Makefile
config.status: WARNING:  config/Makefile.in seems to ignore the --datarootdir setting
config.status: creating docs/Makefile
config.status: WARNING:  docs/Makefile.in seems to ignore the --datarootdir setting
config.status: creating man/Makefile
config.status: WARNING:  man/Makefile.in seems to ignore the --datarootdir setting
config.status: creating config.h
config.status: executing depfiles commands
###############################################################################
 supported filesystems: ftpfs sshfs
 suid files: lufsmnt & lufsumount.
###############################################################################
make[1]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
cd . && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  Makefile
cd . && /bin/sh ./config.status Makefile 
config.status: creating Makefile
make[1]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[1]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
cd . && /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run autoheader
touch ./config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make  all-recursive
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
Making all in kernel
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  kernel/Makefile
cd .. && /bin/sh ./config.status kernel/Makefile 
config.status: creating kernel/Makefile
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Für das Ziel Â»all-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
Making all in lufsd
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  lufsd/Makefile
cd .. && /bin/sh ./config.status lufsd/Makefile depfiles
config.status: creating lufsd/Makefile
config.status: executing depfiles commands
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT daemon.o -MD -MP -MF ".deps/daemon.Tpo" \
	  -c -o daemon.o `test -f 'daemon.c' || echo './'`daemon.c; \
	then mv -f ".deps/daemon.Tpo" ".deps/daemon.Po"; \
	else rm -f ".deps/daemon.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT message.o -MD -MP -MF ".deps/message.Tpo" \
	  -c -o message.o `test -f 'message.c' || echo './'`message.c; \
	then mv -f ".deps/message.Tpo" ".deps/message.Po"; \
	else rm -f ".deps/message.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT fsctl.o -MD -MP -MF ".deps/fsctl.Tpo" \
	  -c -o fsctl.o `test -f 'fsctl.c' || echo './'`fsctl.c; \
	then mv -f ".deps/fsctl.Tpo" ".deps/fsctl.Po"; \
	else rm -f ".deps/fsctl.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT filesystem.o -MD -MP -MF ".deps/filesystem.Tpo" \
	  -c -o filesystem.o `test -f 'filesystem.c' || echo './'`filesystem.c; \
	then mv -f ".deps/filesystem.Tpo" ".deps/filesystem.Po"; \
	else rm -f ".deps/filesystem.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT dircache.o -MD -MP -MF ".deps/dircache.Tpo" \
	  -c -o dircache.o `test -f 'dircache.c' || echo './'`dircache.c; \
	then mv -f ".deps/dircache.Tpo" ".deps/dircache.Po"; \
	else rm -f ".deps/dircache.Tpo"; exit 1; \
	fi
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT options.o -MD -MP -MF ".deps/options.Tpo" \
	  -c -o options.o `test -f 'options.c' || echo './'`options.c; \
	then mv -f ".deps/options.Tpo" ".deps/options.Po"; \
	else rm -f ".deps/options.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsd -rdynamic -lpthread daemon.o message.o fsctl.o filesystem.o dircache.o options.o -ldl  -lpthread 
mkdir .libs
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsd -rdynamic daemon.o message.o fsctl.o filesystem.o dircache.o options.o  -ldl -lpthread  
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
Making all in filesystems
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  filesystems/Makefile
cd .. && /bin/sh ./config.status filesystems/Makefile 
config.status: creating filesystems/Makefile
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making all in ftpfs
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
cd ../.. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  filesystems/ftpfs/Makefile
cd ../.. && /bin/sh ./config.status filesystems/ftpfs/Makefile depfiles
config.status: creating filesystems/ftpfs/Makefile
config.status: executing depfiles commands
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpfs.lo -MD -MP -MF ".deps/ftpfs.Tpo" \
	  -c -o ftpfs.lo `test -f 'ftpfs.cpp' || echo './'`ftpfs.cpp; \
	then mv -f ".deps/ftpfs.Tpo" ".deps/ftpfs.Plo"; \
	else rm -f ".deps/ftpfs.Tpo"; exit 1; \
	fi
mkdir .libs
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpfs.lo -MD -MP -MF .deps/ftpfs.Tpo -c ftpfs.cpp  -fPIC -DPIC -o .libs/ftpfs.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftplib.lo -MD -MP -MF ".deps/ftplib.Tpo" \
	  -c -o ftplib.lo `test -f 'ftplib.cpp' || echo './'`ftplib.cpp; \
	then mv -f ".deps/ftplib.Tpo" ".deps/ftplib.Plo"; \
	else rm -f ".deps/ftplib.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftplib.lo -MD -MP -MF .deps/ftplib.Tpo -c ftplib.cpp  -fPIC -DPIC -o .libs/ftplib.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_unix.lo -MD -MP -MF ".deps/ftpsys_unix.Tpo" \
	  -c -o ftpsys_unix.lo `test -f 'ftpsys_unix.cpp' || echo './'`ftpsys_unix.cpp; \
	then mv -f ".deps/ftpsys_unix.Tpo" ".deps/ftpsys_unix.Plo"; \
	else rm -f ".deps/ftpsys_unix.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_unix.lo -MD -MP -MF .deps/ftpsys_unix.Tpo -c ftpsys_unix.cpp  -fPIC -DPIC -o .libs/ftpsys_unix.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_netware.lo -MD -MP -MF ".deps/ftpsys_netware.Tpo" \
	  -c -o ftpsys_netware.lo `test -f 'ftpsys_netware.cpp' || echo './'`ftpsys_netware.cpp; \
	then mv -f ".deps/ftpsys_netware.Tpo" ".deps/ftpsys_netware.Plo"; \
	else rm -f ".deps/ftpsys_netware.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_netware.lo -MD -MP -MF .deps/ftpsys_netware.Tpo -c ftpsys_netware.cpp  -fPIC -DPIC -o .libs/ftpsys_netware.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_windows.lo -MD -MP -MF ".deps/ftpsys_windows.Tpo" \
	  -c -o ftpsys_windows.lo `test -f 'ftpsys_windows.cpp' || echo './'`ftpsys_windows.cpp; \
	then mv -f ".deps/ftpsys_windows.Tpo" ".deps/ftpsys_windows.Plo"; \
	else rm -f ".deps/ftpsys_windows.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT ftpsys_windows.lo -MD -MP -MF .deps/ftpsys_windows.Tpo -c ftpsys_windows.cpp  -fPIC -DPIC -o .libs/ftpsys_windows.o
ftpsys_windows.cpp:48: warning: 'char* next_word(char*)' defined but not used
/bin/sh ../../libtool --mode=link powerpc-tuxbox-linux-gnu-g++  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o liblufs-ftpfs.la -rpath /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib -version-info 2:0:0 ftpfs.lo ftplib.lo ftpsys_unix.lo ftpsys_netware.lo ftpsys_windows.lo  -lpthread 
powerpc-tuxbox-linux-gnu-g++ -shared -nostdlib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crti.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtbeginS.o  .libs/ftpfs.o .libs/ftplib.o .libs/ftpsys_unix.o .libs/ftpsys_netware.o .libs/ftpsys_windows.o  -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -lpthread -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6 -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof/libstdc++.so -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src/.libs -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib -lm -lc -lgcc_s_nof /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtsavres.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtendS.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crtn.o  -Wl,-soname -Wl,liblufs-ftpfs.so.2 -o .libs/liblufs-ftpfs.so.2.0.0
(cd .libs && rm -f liblufs-ftpfs.so.2 && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so.2)
(cd .libs && rm -f liblufs-ftpfs.so && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so)
creating liblufs-ftpfs.la
(cd .libs && rm -f liblufs-ftpfs.la && ln -s ../liblufs-ftpfs.la liblufs-ftpfs.la)
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
Making all in sshfs
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
cd ../.. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  filesystems/sshfs/Makefile
cd ../.. && /bin/sh ./config.status filesystems/sshfs/Makefile depfiles
config.status: creating filesystems/sshfs/Makefile
config.status: executing depfiles commands
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include   -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sshfs.lo -MD -MP -MF ".deps/sshfs.Tpo" \
	  -c -o sshfs.lo `test -f 'sshfs.cpp' || echo './'`sshfs.cpp; \
	then mv -f ".deps/sshfs.Tpo" ".deps/sshfs.Plo"; \
	else rm -f ".deps/sshfs.Tpo"; exit 1; \
	fi
mkdir .libs
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\" -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sshfs.lo -MD -MP -MF .deps/sshfs.Tpo -c sshfs.cpp  -fPIC -DPIC -o .libs/sshfs.o
if /bin/sh ../../libtool --mode=compile powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../  -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include   -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sftplib.lo -MD -MP -MF ".deps/sftplib.Tpo" \
	  -c -o sftplib.lo `test -f 'sftplib.cpp' || echo './'`sftplib.cpp; \
	then mv -f ".deps/sftplib.Tpo" ".deps/sftplib.Plo"; \
	else rm -f ".deps/sftplib.Tpo"; exit 1; \
	fi
 powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../ -I/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\" -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT sftplib.lo -MD -MP -MF .deps/sftplib.Tpo -c sftplib.cpp  -fPIC -DPIC -o .libs/sftplib.o
/bin/sh ../../libtool --mode=link powerpc-tuxbox-linux-gnu-g++ -O2 -Wall -DSSHPROG=\"/usr/bin/ssh\"  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o liblufs-sshfs.la -rpath /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib -version-info 2:0:0 sshfs.lo sftplib.lo  -lpthread 
powerpc-tuxbox-linux-gnu-g++ -shared -nostdlib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crti.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtbeginS.o  .libs/sshfs.o .libs/sftplib.o  -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -Wl,--rpath -Wl,/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof -lpthread -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6 -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/nof/libstdc++.so -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libstdc++-v3/src/.libs -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc/nof -L/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/build_gcc/gcc -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin -L/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib -lm -lc -lgcc_s_nof /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtsavres.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/nof/crtendS.o /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/lib/nof/crtn.o  -Wl,-soname -Wl,liblufs-sshfs.so.2 -o .libs/liblufs-sshfs.so.2.0.0
(cd .libs && rm -f liblufs-sshfs.so.2 && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so.2)
(cd .libs && rm -f liblufs-sshfs.so && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so)
creating liblufs-sshfs.la
(cd .libs && rm -f liblufs-sshfs.la && ln -s ../liblufs-sshfs.la liblufs-sshfs.la)
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[4]: Für das Ziel Â»all-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making all in util
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  util/Makefile
cd .. && /bin/sh ./config.status util/Makefile depfiles
config.status: creating util/Makefile
config.status: executing depfiles commands
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsmount.o -MD -MP -MF ".deps/lufsmount.Tpo" \
	  -c -o lufsmount.o `test -f 'lufsmount.c' || echo './'`lufsmount.c; \
	then mv -f ".deps/lufsmount.Tpo" ".deps/lufsmount.Po"; \
	else rm -f ".deps/lufsmount.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsmount  lufsmount.o  -lpthread 
mkdir .libs
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsmount lufsmount.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsumount.o -MD -MP -MF ".deps/lufsumount.Tpo" \
	  -c -o lufsumount.o `test -f 'lufsumount.c' || echo './'`lufsumount.c; \
	then mv -f ".deps/lufsumount.Tpo" ".deps/lufsumount.Po"; \
	else rm -f ".deps/lufsumount.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsumount  lufsumount.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsumount lufsumount.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT lufsmnt.o -MD -MP -MF ".deps/lufsmnt.Tpo" \
	  -c -o lufsmnt.o `test -f 'lufsmnt.c' || echo './'`lufsmnt.c; \
	then mv -f ".deps/lufsmnt.Tpo" ".deps/lufsmnt.Po"; \
	else rm -f ".deps/lufsmnt.Tpo"; exit 1; \
	fi
lufsmnt.c:17:1: warning: "_PATH_MOUNTED" redefined
In file included from /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/include/mntent.h:26,
                 from lufsmnt.c:7:
/media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdk/lib/gcc/powerpc-tuxbox-linux-gnu/3.4.6/../../../../powerpc-tuxbox-linux-gnu/include/paths.h:54:1: warning: this is the location of the previous definition
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o lufsmnt  lufsmnt.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o lufsmnt lufsmnt.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT auto.sshfs.o -MD -MP -MF ".deps/auto.sshfs.Tpo" \
	  -c -o auto.sshfs.o `test -f 'auto.sshfs.c' || echo './'`auto.sshfs.c; \
	then mv -f ".deps/auto.sshfs.Tpo" ".deps/auto.sshfs.Po"; \
	else rm -f ".deps/auto.sshfs.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o auto.sshfs  auto.sshfs.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o auto.sshfs auto.sshfs.o  -lpthread  
if powerpc-tuxbox-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../    -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MT auto.ftpfs.o -MD -MP -MF ".deps/auto.ftpfs.Tpo" \
	  -c -o auto.ftpfs.o `test -f 'auto.ftpfs.c' || echo './'`auto.ftpfs.c; \
	then mv -f ".deps/auto.ftpfs.Tpo" ".deps/auto.ftpfs.Po"; \
	else rm -f ".deps/auto.ftpfs.Tpo"; exit 1; \
	fi
/bin/sh ../libtool --mode=link powerpc-tuxbox-linux-gnu-gcc  -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64   -o auto.ftpfs  auto.ftpfs.o  -lpthread 
powerpc-tuxbox-linux-gnu-gcc -O2 -Wall -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o auto.ftpfs auto.ftpfs.o  -lpthread  
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
Making all in include
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  include/Makefile
cd .. && /bin/sh ./config.status include/Makefile 
config.status: creating include/Makefile
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[3]: Für das Ziel Â»allÂ« ist nichts zu tun.
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
Making all in man
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
cd .. && \
	  /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  man/Makefile
cd .. && /bin/sh ./config.status man/Makefile 
config.status: creating man/Makefile
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Für das Ziel Â»allÂ« ist nichts zu tun.
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
Making install in kernel
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[4]: Für das Ziel Â»install-exec-amÂ« ist nichts zu tun.
make[4]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/kernel'
Making install in lufsd
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin
  /bin/sh ../libtool --mode=install /usr/bin/install -c lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd
/usr/bin/install -c lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin
 /usr/bin/install -c lussh /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lussh
make  install-exec-hook
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
lufsd post install configuration...
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../sbin
ln -fs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../sbin/mount.lufs
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/etc
 /usr/bin/install -c -m 644 lufsd.conf /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/etc/lufsd.conf
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
Making install in filesystems
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making install in ftpfs
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
/bin/sh ../../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib
 /bin/sh ../../libtool --mode=install /usr/bin/install -c  liblufs-ftpfs.la /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib/liblufs-ftpfs.la
/usr/bin/install -c .libs/liblufs-ftpfs.so.2.0.0 /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib/liblufs-ftpfs.so.2.0.0
(cd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib && { ln -s -f liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so.2 || { rm -f liblufs-ftpfs.so.2 && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so.2; }; })
(cd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib && { ln -s -f liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so || { rm -f liblufs-ftpfs.so && ln -s liblufs-ftpfs.so.2.0.0 liblufs-ftpfs.so; }; })
/usr/bin/install -c .libs/liblufs-ftpfs.lai /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib/liblufs-ftpfs.la
PATH="$PATH:/sbin" ldconfig -n /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/ftpfs'
Making install in sshfs
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
/bin/sh ../../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib
 /bin/sh ../../libtool --mode=install /usr/bin/install -c  liblufs-sshfs.la /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib/liblufs-sshfs.la
/usr/bin/install -c .libs/liblufs-sshfs.so.2.0.0 /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib/liblufs-sshfs.so.2.0.0
(cd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib && { ln -s -f liblufs-sshfs.so.2.0.0 liblufs-sshfs.so.2 || { rm -f liblufs-sshfs.so.2 && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so.2; }; })
(cd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib && { ln -s -f liblufs-sshfs.so.2.0.0 liblufs-sshfs.so || { rm -f liblufs-sshfs.so && ln -s liblufs-sshfs.so.2.0.0 liblufs-sshfs.so; }; })
/usr/bin/install -c .libs/liblufs-sshfs.lai /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib/liblufs-sshfs.la
PATH="$PATH:/sbin" ldconfig -n /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems/sshfs'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make  install-exec-hook
make[5]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
filesystems post install configuration...
make[5]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[4]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/filesystems'
Making install in util
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin
  /bin/sh ../libtool --mode=install /usr/bin/install -c lufsmount /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsmount
/usr/bin/install -c lufsmount /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsmount
  /bin/sh ../libtool --mode=install /usr/bin/install -c lufsumount /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsumount
/usr/bin/install -c lufsumount /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsumount
  /bin/sh ../libtool --mode=install /usr/bin/install -c lufsmnt /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsmnt
/usr/bin/install -c lufsmnt /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsmnt
  /bin/sh ../libtool --mode=install /usr/bin/install -c auto.sshfs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.sshfs
/usr/bin/install -c auto.sshfs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.sshfs
  /bin/sh ../libtool --mode=install /usr/bin/install -c auto.ftpfs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.ftpfs
/usr/bin/install -c auto.ftpfs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.ftpfs
make  install-exec-hook
make[4]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
postinstall configuration
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../etc
ln -fs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.sshfs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../etc/auto.sshfs
ln -fs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.ftpfs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/../etc/auto.ftpfs
if [ "true" ]; then chmod a+s /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsmnt /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsumount; fi
make[4]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
make[3]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/util'
Making install in include
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[3]: Für das Ziel Â»install-exec-amÂ« ist nichts zu tun.
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/include
 /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/install-sh -c -m 644 lufs/proto.h /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/include/lufs/proto.h
 /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/install-sh -c -m 644 lufs/fs.h /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/include/lufs/fs.h
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/include'
Making install in man
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[3]: Für das Ziel Â»install-exec-amÂ« ist nichts zu tun.
/bin/sh ../config/mkinstalldirs /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/share/man/man1
 /usr/bin/install -c -m 644 ./lufsmount.1 /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/share/man/man1/lufsmount.1
 /usr/bin/install -c -m 644 ./lufsumount.1 /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/share/man/man1/lufsumount.1
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/man'
make[2]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[3]: Für das Ziel Â»install-exec-amÂ« ist nichts zu tun.
make[3]: Für das Ziel Â»install-data-amÂ« ist nichts zu tun.
make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[2]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
make[1]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7'
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.ftpfs
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/auto.sshfs
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsmount
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lufsumount
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/bin/lussh
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/etc/auto.sshfs
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/etc/auto.ftpfs
rm /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/lib/liblufs-sshfs.*
ln -sf ../bin/lufsd /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/sbin/mount.lufs
rm -rf lufs-0.9.7
touch /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root
[ -x /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufsd-local.sh ] && /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufsd-local.sh /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk || true

Im zweiten Durchlauf werden folgende Befehle ausgeführt, die beim ersten Durchlauf fehlen:

Code: Alles auswählen

    cd .. && \
         /bin/sh /media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/config/missing --run automake-1.7 --gnu  lufsd/Makefile
    cd .. && /bin/sh ./config.status lufsd/Makefile depfiles
    config.status: creating lufsd/Makefile
    config.status: executing depfiles commands
    make[3]: Leaving directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'
    make[3]: Entering directory `/media/disk/tuxbox-directfb-2008-10-17_18-31/tuxbox-cvs/cdk/lufs-0.9.7/lufsd'

Ähnliches wiederholt sich noch zwei Mal, was dazu führt:

Code: Alles auswählen

/usr/bin/install -c -m 644 lufsd.conf /media/disk/tuxbox-directfb-2008-10-17_18-31/dbox2/cdkflash/root/etc/lufsd.conf

im Gegensatz zum falschen Befehl

Code: Alles auswählen

/usr/bin/install -c -m 644 lufsd.conf /etc/lufsd.conf

Das Neuschreiben der Makefiles ist wichtig, da dies gepatcht wird:

Code: Alles auswählen

-configdir=/etc
+configdir=$(prefix)/etc

Warum das Neuschreiben der Makefiles bei Dir im ersten Anlauf nicht funktioniert, weiß ich nicht.
Startest Du ./configure && make flash... immer in einem Verzeichnis, in dem vorher
noch nie kompiliert wurde? Ich habe hier einen lokalen CVS-checkout, den ich in ein
anderes Verzeichnis kopiere und dort dann kompiliere. So umgehe ich Probleme mit
eventuellen Rückständen früherer Kompilierdurchgänge. Wenn Du das Problem nicht
lösen kannst, eröffne bitte einen neuen Thread dazu, da es hier um uClibc geht.

rhabarber1848 hat geschrieben:Warum das Neuschreiben der Makefiles bei Dir im ersten Anlauf nicht funktioniert, weiß ich nicht.

cdk/Patches/lufs.diff ist unvollständig: EDIT: Patch ist im CVS
Damit sollte das Problem erledigt sein. Bitte testen.
Es reicht nicht, nur Makefile.am zu patchen, Makefile.in muss auch angepasst werden,
da Makefile.in nicht neu geschrieben wird, wenn die Zeit der letzten Änderungen bei
beiden Dateien gleich ist.

Beitrag von **amiga23** » Freitag 17. Oktober 2008, 21:47

OT: ja, hat nichts mit dem uclibc.diff zu tun, tritt auch auf, wenn ich den uclibc.diff nicht anwende. Danke für den lufs.diff, werde ich gleich testen.
UPDATE: Funktioniert

Mehrfaches hintereinander bauen von
rm ../../dbox2/cdkflash/root/bin/lufsd
make flash-lufsd
liefert keinen Fehler mehr.
@seife: bitte commiten.

Beitrag von **seife** » Freitag 17. Oktober 2008, 22:41

lufs.diff habe ich eingecheckt.
uclibc.diff noch nicht, denn ich bin wieder 2 Wochen im Urlaub und hinterher 1 Woche unterwegs, kann also evtl. Fallout nicht fixen.
Wenn es bis dann noch niemand eingecheckt hat, mache ich das.

Tuxbox-Board

uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch

Re: uclibc patch