Problem mit selbst erstelltem Image (nur Nokia?)

Das Original Benutzerinterface Neutrino-SD incl. zapit, sectionsd, yWeb etc...
Migiman
Interessierter
Interessierter
Beiträge: 30
Registriert: Sonntag 23. September 2007, 04:13

Problem mit selbst erstelltem Image (nur Nokia?)

Beitrag von Migiman »

Also, ich habe Folgendes Problem, ich bastel gerade wieder an einem Image. Das Problem ist jetzt, das die Nokia Box einmal normal startet , aber nach einem erneuten restart dann mit

Code: Alles auswählen

Options:

  1: Console on null

  2: Console on ttyS0

  3: Console on framebuffer

Select option (1-3), other keys to stop autoboot:  0 

### FS (squashfs) loading 'vmlinuz' to 0x100000

SQUASHFS error: no squashfs_magic: ffff7368

### FS LOAD ERROR<0> for vmlinuz!

............................................................... done

Un-Protected 63 sectors

## Booting image at 00100000 ...

u-boot: Bad Magic Number *** THIS IS NOT THE FAMOUS dbox2 'Bad Magic' ***

=> 
hängen bleibt. Ich versteh das um ehrlich zu sein nicht. Wenn ich das gleiche Image auf eine Sagem Flasche, dann lässt die sich auch ohne Probleme wieder neu Starten. Mit anderen worten, die Sagem läuft ganz normal. Ich habe schon alles rückgängig gemacht, was ich in den letzten Tagen eingebaut habe. Auch die Start Dateien (rcs, rcs.locale, start_neutrino) auf standart gelassen, also so wie die Dateien nach dem Kombilieren im Image drin sind. Alles hat nicht den gewünschten erfolg gebracht. Die nokia kann ich auch einmal Flaschen, starten, im Menü rum gehen isw, aber wenn ich sie neu starte, bleibt sie hängen. Einen Hardware Defekt schliese ich mal aus, denn ein anderes Image läuft Problemlos auf der box, bin echt ratlos. Hier mal ein Bootlog, nach dem ersten Flaschen + neu starten

Code: Alles auswählen

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:12:c2:74

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

 Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x004c0000 : "root (squashfs+lzma)"

0x004c0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.7.2 (2009-03-18 01:35:50 CET)

mount: using /etc/fstab

mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such d

evice

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Detected STB:

        Vendor: Nokia

        Model: D-BOX2  (2 flash chips)

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

cam: no firmware file found

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

DVB: VES1820(0): pwm=0x48

DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters enabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.27 2009/03/15 22:11:09 rhabarber1848 Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Starting the automounter

insmod: sunrpc.o: no module by that name found

insmod: lockd.o: no module by that name found

insmod: cifs.o: no module by that name found

insmod: nfs.o: no module by that name found



Please press Enter to activate this console. [LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] Intializing font cache...

[lcdmenu] /bin/enigma was not found, entry Enigma discarded

[lcdmenu] /bin/radiobox was not found, entry Radiobox discarded

[lcdmenu] /bin/lcars was not found, entry Lcars discarded

[lcdmenu] Only one GUI was found, selecting that

Thu Jan  1 01:00:00 CET 1970

$Id: sectionsd.cpp,v 1.288 2009/02/28 13:57:50 seife Exp $

[sectionsd] Caching max 6000 events

[sectionsd] Caching 14 days

[sectionsd] Caching 6 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[timerd] woke up from timer? false!

[camd] CA_SEND_MSG: No such device

[camd] CA_SEND_MSG: No such device

$Id: zapit.cpp,v 1.421 2009/02/24 13:50:25 seife Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading

.

[frontend] uncommitted_switch_mode 0

/var/tuxbox/config/zapit/services.xml: No such file or directory

$Id: controld.cpp,v 1.133 2009/02/24 19:09:09 seife Exp $



[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[controld] format: 4:3(LB)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.

[yhttpd] Webserver starting...

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

[neutrino] executing mkdir -p /var/share/tuxbox/neutrino/icons/

[neutrino] alternate folder created in: /var/share/tuxbox/neutrino/icons/

[neutrino] executing mkdir -p /var/share/tuxbox/neutrino/lcdd

[neutrino] alternate folder created in: /var/share/tuxbox/neutrino/lcdd

[neutrino] Loading of scan settings failed. Using defaults.

[deutsch.locale] missing entry:     version.camdevo

[deutsch.locale] superfluous entry: version.camdevo

[deutsch.locale] has 1 missing entrys

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) 

[neutrino] setRepeat: delay=250 period=0 use kernel-repeat: no

[neutrino] registering as event client

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix12/Regular)

[sectionsd] getUTC: read: Connection timed out

[neutrino] no file /var/tuxbox/config/init.end was found

[neutrino] initialized everything

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading



[sectionsd] getUTC: read: Connection timed out



[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

zapit shot down :)

Waiting for controld (max. 9 seconds)

CXA2092 found

umount: cannot umount /var: Device or resource busy

The system is going down NOW!

Sending SIGTERM to all processes

[yhttpd] !!! SIGNAL !!! :15!

[yhttpd] No special SIGNAL-Handler:15!

[yhttpd] stop requested......

Sending SIGKILL to all processes

Requesting system reboot

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0  mID 01

debug: feID 7a    gtxID 0b

debug: fpID 5a     dsID 01-52.0a.cf.05.00.00-56

debug: HWrev X5  SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug: 

BOOTP/TFTP bootstrap loader (v0.3)

debug: 

debug: Transmitting BOOTP request via broadcast

debug: Got BOOTP reply from Server IP 192.168.2.15, My IP 192.168.2.8

debug: Sending TFTP-request for file C/minflash/kernel/os

will verify ELF image, start= 0x800000, size= 1251128

verify sig: 0

Branching to 0x409b8

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0  mID 01

debug: feID 7a    gtxID 0b

debug: fpID 5a     dsID 01-52.0a.cf.05.00.00-56

debug: HWrev X5  SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug: 

BOOTP/TFTP bootstrap loader (v0.3)

debug: 

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed



Flash-FS bootstrap loader (v1.5)



Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036



will verify ELF image, start= 0x800000, size= 163276

verify sig: 262

Branching to 0x40000





U-Boot 1.2.0 (Tuxbox) (Mar 18 2009 - 01:30:19)



CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

       Watchdog enabled

I2C:   ready

DRAM:  32 MB

FLASH:  8 MB

Scanning JFFS2 FS: .. done.

find_inode failed for name=tuxbox

load: Failed to find inode

FB:    ready

LCD:   ready

In:    serial

Out:   serial

Err:   serial

Net:   SCC ETHERNET

find_inode failed for name=tuxbox

load: Failed to find inode

ready - can't find logo in flash

find_inode failed for name=tuxbox

load: Failed to find inode

can't find logo in flash



Options:

  1: Console on null

  2: Console on ttyS0

  3: Console on framebuffer

Select option (1-3), other keys to stop autoboot:  0 

### FS (squashfs) loading 'vmlinuz' to 0x100000

SQUASHFS error: no squashfs_magic: ffff7368

### FS LOAD ERROR<0> for vmlinuz!

............................................................... done

Un-Protected 63 sectors

## Booting image at 00100000 ...

u-boot: Bad Magic Number *** THIS IS NOT THE FAMOUS dbox2 'Bad Magic' ***

=>
Migiman
Interessierter
Interessierter
Beiträge: 30
Registriert: Sonntag 23. September 2007, 04:13

Re: Problem mit selbst erstelltem Image (nur Nokia?)

Beitrag von Migiman »

keiner eine Idee?
GetAway
Contributor
Beiträge: 1509
Registriert: Donnerstag 27. Dezember 2007, 12:59

Re: Problem mit selbst erstelltem Image (nur Nokia?)

Beitrag von GetAway »

Boardsuche --> THIS IS NOT THE FAMOUS dbox2 :wink:
Migiman
Interessierter
Interessierter
Beiträge: 30
Registriert: Sonntag 23. September 2007, 04:13

Re: Problem mit selbst erstelltem Image (nur Nokia?)

Beitrag von Migiman »

die SUFU hatte ich heute nacht auch genutzt, aber bin niccht schlau draus geworden. Mit der Board Suche komme ich auf 2 Möglichkeiten, entweder einen hardware Defekt, den ich aber ausschliesen kann, weil andere Images Problemlos laufen, oder das mit u-boot 1.3.2, aber das kanns auch nicht sein, weil in dem image u-boot 1.2.0 drin ist. Ich stehe echt am schlauch sorry
dbt
Administrator
Beiträge: 2675
Registriert: Donnerstag 28. September 2006, 19:18

Re: Problem mit selbst erstelltem Image (nur Nokia?)

Beitrag von dbt »

Code: Alles auswählen

0x00040000-0x004c0000 : "root (squashfs+lzma)"
Bisschen eng vlt.?

btw: würde mich auch nicht wundern, wenn die Hilfe etwas dünn ausfällt:

Code: Alles auswählen

...
[deutsch.locale] missing entry:     version.camdevo

[deutsch.locale] superfluous entry: version.camdevo
...
Migiman
Interessierter
Interessierter
Beiträge: 30
Registriert: Sonntag 23. September 2007, 04:13

Re: Problem mit selbst erstelltem Image (nur Nokia?)

Beitrag von Migiman »

den root bereich hatte ich schonmal größer gemacht, brachte aber auch nicht den gewünschten erfolg :(
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: Problem mit selbst erstelltem Image (nur Nokia?)

Beitrag von seife »

Baue ein unverändertes CVS ohne deine "Verbesserungen" und es wird auch funktionieren.