[ 3058.936056] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 3059.073051] usb 1-3: New USB device found, idVendor=15a4, idProduct=9016
[ 3059.073061] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3059.073069] usb 1-3: Product: DVB-T 2
[ 3059.073074] usb 1-3: Manufacturer: Afatech
[ 3059.073078] usb 1-3: SerialNumber: 010101010600001
[ 3059.073270] usb 1-3: configuration #1 chosen from 1 choice
[ 3059.077578] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 3059.078027] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.1/input/input6
[ 3059.078392] generic-usb 0003:15A4:9016.0004: input,hidraw3: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-3/input1
[ 3059.387688] WARNING: You're using an obsolete driver! You shouldn't be using it!
[ 3059.387692] If you want anything new, you can use
http://git.linuxtv.org/media_build.git.
[ 3059.387696] The tree is still here just to preserve the development history.
[ 3059.934868] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
[ 3059.934881] usb 1-3: firmware: requesting dvb-usb-af9015.fw
[ 3060.110832] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[ 3060.179011] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
[ 3060.179092] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3060.180292] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
[ 3060.306733] af9013: firmware version:4.95.0
[ 3060.311234] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[ 3060.380488] NXP TDA18218 successfully identified.
[ 3060.380500] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
[ 3060.388990] usbcore: registered new interface driver dvb_usb_af9015
[ 3710.437347] af9013: invalid bandwidth
[ 3745.533160] af9013: invalid bandwidth
[ 3766.615522] af9013: invalid bandwidth