Ich habe hier ein kleines Problem meine Sat Sagem 1xI mit dem neuem Image zu versorgen...
Hier einmal das Log:
Rdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-5f.63.79.07.00.00-29
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.158, My IP 192.168.0.180
debug: Sending TFTP-request for file H/tuxbox/Loader_28_1xI_EliteDVB-Neutrino-Lc
ars/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-31-90-88
FLASH: 8 MB
FB driver (AVIA-ENX) initialized
FB logo at: 0x8247A (0xDDD2 bytes)
Input: serial
Output: serial
Any key druecken um das Flashing abzubrechen.. : 0
dbox2-ppcboot> bootp 120000 /H/tuxbox/Loader_28_1xI_EliteDVB-Neutrino-Lcars/28_1
xI.img
BOOTP broadcast 1
TFTP from server 192.168.0.158; our IP address is 192.168.0.180
Filename '/H/tuxbox/Loader_28_1xI_EliteDVB-Neutrino-Lcars/28_1xI.img'.
Load address: 0x120000
Loading: ###################### (...Der Platz halber gekürzt <IMG SRC="/forum/images/smiles/icon_wink.gif"> )

lo: 0x120000
dbox2-ppcboot> protect off 10020000 107fffff
Error: start and/or end address not on sector boundary
dbox2-ppcboot>
Was könnte das sein?