habe ein Problem mit dem Yadd. Die Box ist anhand des Readme vom DBox II Bootmanager im Debug-Modus. Jetzt möchte ich gerne das Yadd ausführen. Allerdings bricht mir der Vorgang ab. Zur Übersicht habe ich mal das Log beigefügt.
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-af.ab.42.07.00.00-9b
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.173.5.2, My IP 192.173.5.5
debug: Sending TFTP-request for file G/DBox/Yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201852
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 28 2002 - 20:04:24)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-ce-30
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.173.5.2; our IP address is 192.173.5.5
Filename 'G/DBox/Yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FE0FB8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.173.5.2; our IP address is 192.173.5.5
Filename 'G/DBox/Yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FE0FB8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.173.5.2; our IP address is 192.173.5.5
Filename 'G/DBox/Yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 685793 Bytes = 669 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (wild@p200) (gcc version 3.0.4) #2 Mon Apr 8 21:20:03 CEST 2
002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.173.5.2:G/DBox/Yadd/c
dkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.173.5.2:G/DBox/Y
add/cdkroot/
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30408k available (1252k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20101kB/6700kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:1f:ce:30
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.173.5.2, my address is 192.173.5.5
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.173.5.2
Looking up port of RPC 100005/2 on 192.173.5.2
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
init started: BusyBox v0.61.pre (2002.04.02-22:55+0000) multi-caReal Time Clock
Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.29 2002/05/03 06:03:51 obi Exp $
[FONT] initializing core...avia_core.c: do_firmread: Unable to load '/var/tuxbox
/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
/lib/modules/2.4.2/misc/cam.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_read_message
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_reset
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_write_message
/lib/modules/2.4.2/misc/dvb.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
mouse0: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
event0: Event device for input0
Init VES1893
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol register_frontend
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol unregister_frontend
/lib/modules/2.4.2/misc/ves1893.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
/lib/modules/2.4.2/misc/avia_gt.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/avia_gt.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue_
irq
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pcr_pi
d
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue_
write_pointer
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_alloc_irq
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol register_demux
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_force_disc
ontinuity
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol gtx_set_queue_pointer
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_get_info
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_get_queue_
write_pointer
/lib/modules/2.4.2/misc/avia_gt_napi.o: unresolved symbol avia_gt_free_irq
/lib/modules/2.4.2/misc/avia_gt_napi.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
/lib/modules/2.4.2/misc/avia_gt_vbi.o: unresolved symbol avia_gt_get_info
/lib/modules/2.4.2/misc/avia_gt_vbi.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_show
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_clut
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_siz
e
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_pos
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_get_info
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_size
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_mod
e
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_clut
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_blevel
/lib/modules/2.4.2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_info
/lib/modules/2.4.2/misc/avia_gt_fb.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
CXA2092 found
CXA2092 found
Network LCD-Driver $Id: lcdd.cpp,v 1.46 2002/04/23 06:57:12 obi Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
[timerd] startup
$Id: sectionsd.cpp,v 1.125 2002/05/04 00:14:51 rasc Exp $
caching 504 hours
events are old 60min after their end time
[sectionsd ] checking timerd
[sectionsd ] timerd available
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
$Id: zapit.cpp,v 1.168 2002/05/03 23:59:10 McClean Exp $
/var/tuxbox/config/zapit/zapit.conf: No such file or directory
/dev/ost/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
Segmentation fault
Controld $Id: controld.cpp,v 1.57 2002/03/29 15:47:18 obi Exp $
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
zapitclient: connect: No such file or directory
zapitclient: connect: No such file or directory
httpd gestartet
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
NeutrinoNG $Id: neutrino.cpp,v 1.260 2002/05/03 20:22:32 McClean Exp $
[neutrino] frameBuffer Instance created
[FONT] initializing core...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
/dev/fb/0: No such file or directory
framebuffer not available.
Error while setting framebuffer mode
The system is going down NOW !!
Sending SIGTERM to all processe[nhttpd] stop requested......
Sending SIGKILL to all processes.
CXA2092 found
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt
Man merkt vielleicht, dass ich das zum Ersten Mal mache...
Ich bin auch nicht so ganz mit dem Punkt 8 des Readme's klar gekommen, da ich kein Verzeichnis ucodes gefunden habe. Also habe ich eines erstellt...
Was muss ich jetzt noch tun? Die BR Soft läuft immer noch.
Vielen Dank schon mal.
